[asterisk-users] dial and bridge

[Lenz Emilitri]

I never actually used parking, but should it work if I call the Park
application as the second leg of the Originate (w/o going through the
dialplan)? I dont seem to be able to make it work.
l.


2013/5/15 Mitul Limbani <mitul at enterux.in>

> The dial n bridge might work, but there ain't indefinite wait in that
> scenario.
> Direct calls to parking you might try Local(70X at from-internal) but I m
> not sure if this method works reliably.
>
> The method I mentioned is used by vicidial and it works flawlessly, yes it
> comes with some computing load, however you can try the newer ConfBridge
> app to see if its cheaper.
>
> Mitul
>
> On Wednesday, May 15, 2013, Lenz Emilitri wrote:
>
>> Hi Mitul,
>> I agree that the dialplan way is easier, but it's a client requirement to
>> avoid using it. I was wondering if there was a way to send a call directly
>> to a parking slot right from the originate, because that is cheaper than
>> running conferences, and then joining the second call right to the parked
>> call, so that all we have to do is two originates.
>> l.
>>
>>
>> 2013/5/14 Mitul Limbani <mitul at enterux.in>
>>
>>> Dial first call and put it into a conference, then dial second call and
>>> put him into same conference to bridge both.
>>>
>>> However dial plan way is much more simpler.
>>>
>>> Mitul
>>>
>>>
>>> On Tuesday, May 14, 2013, Lenz Emilitri wrote:
>>>
>>>>
>>>> Hi all,
>>>> I need some advice - I have been working on originating multiple calls
>>>> using AMI and then joining them.
>>>> What I want to do is:
>>>> - dial call 1 (where the caller is in a "channel" format, like SIp/1234
>>>> or Local/1234 at ext) and "park" it somehow
>>>> - dial call 2 (where again the caller is in channel format) and join it
>>>> to the previous call.
>>>>
>>>> As a requirement, I cannot use the dialplan as an end-point (as I
>>>> cannot change it) but need to use the AMI only.
>>>>
>>>> I tried doing something like:
>>>>
>>>> Action: Originate
>>>> Channel: Local/300 at from-internal
>>>> Async: 1
>>>> Application: Wait
>>>> Data: 1973
>>>>
>>>> So that the call goes to 300 and then basically stays there forever,
>>>> and then I dial again:
>>>>
>>>> Action: Originate
>>>> Channel: Local/500 at from-internal
>>>> Async: 1
>>>> Application: Wait
>>>> Data: 1973
>>>>
>>>> And then try to bridge the results, but it does not seem to work.
>>>> What I would like to do would be more on the lines of:
>>>>
>>>> Originate call 1 and park it (using a park or waiting)
>>>> Originate call 2 and bridge it immediately to call1 (using the
>>>> Application part)
>>>>
>>>> But maybe I am missing something? is there anybody who has better
>>>> suggestions?
>>>>
>>>> Thanks
>>>> l.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Loway - home of QueueMetrics - http://queuemetrics.com
>>>> Test-drive WombatDialer beta @ http://wombatdialer.com
>>>>
>>>
>>>
>>> --
>>> Regards,
>>> Mitul Limbani,
>>> Chief Architech & Founder,
>>> Enterux Solutions Pvt. Ltd.
>>> 110 Reena Complex, Opp. Nathani Steel,
>>> Vidyavihar (W), Mumbai - 400 086. India
>>> http://www.enterux.com/
>>> http://www.entvoice.com/
>>> email: mitul at enterux.in
>>> DID: +91-22-71967121
>>> Cell: +91-9820332422
>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>                http://www.asterisk.org/hello
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>
>>
>> --
>> Loway - home of QueueMetrics - http://queuemetrics.com
>> Test-drive WombatDialer beta @ http://wombatdialer.com
>>
>
>
> --
> Regards,
> Mitul Limbani,
> Chief Architech & Founder,
> Enterux Solutions Pvt. Ltd.
> 110 Reena Complex, Opp. Nathani Steel,
> Vidyavihar (W), Mumbai - 400 086. India
> http://www.enterux.com/
> http://www.entvoice.com/
> email: mitul at enterux.in
> DID: +91-22-71967121
> Cell: +91-9820332422
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Loway - home of QueueMetrics - http://queuemetrics.com
Test-drive WombatDialer beta @ http://wombatdialer.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130515/60038613/attachment.htm>