[asterisk-users] Sangoma Wanpipe Driver

[Yves A.]

- solved -
it turned out that libpri was not compiled correctly...
and... Asgars comment about group systax is correct.

thx &
regards,
yves
Am 13.05.2013 13:21, schrieb Yves A.:
> that was the syntax before 1.8 or 11.x I think...
>
> what about "pseudo"?
>
> yves
>
> Am 13.05.2013 13:16, schrieb Asghar Mohammad:
>> Dial(DAHDI/i0/number, is it not Dial(DAHDI/r0/number or 
>> Dial(DAHDI/R0/number or Dial(DAHDI/g0/number or Dial(DAHDI/G0/number?
>>
>>
>> On Mon, May 13, 2013 at 12:53 PM, Yves A. <yves030 at gmx.de 
>> <mailto:yves030 at gmx.de>> wrote:
>>
>>     mmh... actually supportline is closed...
>>
>>     why proceeds the call to dahdi/pseudo-xxxx??
>>
>>     i have never seen this before...
>>
>>     thx.,
>>     yves
>>
>>     Am 13.05.2013 11:42, schrieb Duncan Turnbull:
>>
>>         We have had challenges with the latest kernel versions on
>>         Ubuntu and sangoma wanpipe drivers
>>
>>         An older kernel - no problem, latest ones, sometime risky.
>>         There are release notes on their site stating the supported
>>         versions so it might pay to check that
>>
>>         But if it compiled ok it might be something else
>>
>>         Sangoma support will dial in and help you if you ask them
>>
>>         Cheers Duncan
>>
>>         On 13/05/2013, at 9:29 PM, "Yves A." <yves030 at gmx.de
>>         <mailto:yves030 at gmx.de>> wrote:
>>
>>             Hi,
>>
>>
>>             I migrated from asterisk 1.6 to 11.3.
>>             The Server has a Sangoma A104 quadPri card installed. OS
>>             is a fresh installed Ubuntu 12.04 64bit
>>             libpri, dahdi etc. all latest releases..
>>
>>             Sangoma says... driver is compatible with ANY asterisk
>>             version...
>>
>>             I tried driver 3.5.8... Setup ended with error.
>>             I tried (latest) driver 7.0.1 Setup went through,
>>             Asterisk is showing dahdi channels... all fine.... I
>>             thought... but..:
>>
>>             when dialing
>>             Dial(DAHDI/i0/number)
>>
>>             it accepts the call, but generates a DAHDI/Pseudo channel
>>             and the call goes not into the PSTN...
>>
>>             What am I doing wrong?
>>
>>             Has anybody successfully compiled sangoma driver 7.0.1 in
>>             combination with an asterisk 11.3?
>>
>>             thanks for hints,
>>             regards,
>>             yves
>>
>>             --
>>             _____________________________________________________________________
>>             -- Bandwidth and Colocation Provided by
>>             http://www.api-digital.com --
>>             New to Asterisk? Join us for a live introductory webinar
>>             every Thurs:
>>             http://www.asterisk.org/hello
>>
>>             asterisk-users mailing list
>>             To UNSUBSCRIBE or update options visit:
>>             http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>         --
>>         _____________________________________________________________________
>>         -- Bandwidth and Colocation Provided by
>>         http://www.api-digital.com --
>>         New to Asterisk? Join us for a live introductory webinar
>>         every Thurs:
>>         http://www.asterisk.org/hello
>>
>>         asterisk-users mailing list
>>         To UNSUBSCRIBE or update options visit:
>>         http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>     --
>>     _____________________________________________________________________
>>     -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>     New to Asterisk? Join us for a live introductory webinar every Thurs:
>>     http://www.asterisk.org/hello
>>
>>     asterisk-users mailing list
>>     To UNSUBSCRIBE or update options visit:
>>     http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided byhttp://www.api-digital.com  --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>                 http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>     http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                 http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130515/3d2fa7c0/attachment.htm>