[asterisk-users] dial and bridge

[Mitul Limbani]

Dial first call and put it into a conference, then dial second call and put
him into same conference to bridge both.

However dial plan way is much more simpler.

Mitul

On Tuesday, May 14, 2013, Lenz Emilitri wrote:

>
> Hi all,
> I need some advice - I have been working on originating multiple calls
> using AMI and then joining them.
> What I want to do is:
> - dial call 1 (where the caller is in a "channel" format, like SIp/1234 or
> Local/1234 at ext) and "park" it somehow
> - dial call 2 (where again the caller is in channel format) and join it to
> the previous call.
>
> As a requirement, I cannot use the dialplan as an end-point (as I cannot
> change it) but need to use the AMI only.
>
> I tried doing something like:
>
> Action: Originate
> Channel: Local/300 at from-internal
> Async: 1
> Application: Wait
> Data: 1973
>
> So that the call goes to 300 and then basically stays there forever, and
> then I dial again:
>
> Action: Originate
> Channel: Local/500 at from-internal
> Async: 1
> Application: Wait
> Data: 1973
>
> And then try to bridge the results, but it does not seem to work.
> What I would like to do would be more on the lines of:
>
> Originate call 1 and park it (using a park or waiting)
> Originate call 2 and bridge it immediately to call1 (using the Application
> part)
>
> But maybe I am missing something? is there anybody who has better
> suggestions?
>
> Thanks
> l.
>
>
>
>
>
>
> --
> Loway - home of QueueMetrics - http://queuemetrics.com
> Test-drive WombatDialer beta @ http://wombatdialer.com
>


-- 
Regards,
Mitul Limbani,
Chief Architech & Founder,
Enterux Solutions Pvt. Ltd.
110 Reena Complex, Opp. Nathani Steel,
Vidyavihar (W), Mumbai - 400 086. India
http://www.enterux.com/
http://www.entvoice.com/
email: mitul at enterux.in
DID: +91-22-71967121
Cell: +91-9820332422
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130514/c75e1689/attachment.htm>