[asterisk-users] WARNING[28151] from CLI

Wed Mar 27 09:09:59 CDT 2013

ok thanks for support and help

2013/3/27 Yves A. <yves030 at gmx.de>

>  you have already listed the two config files for using zaptel.
> on first sight, they look ok to me (did not use zaptel for years now)
> maybe you should definitely comment out any span that is not in use... or
> do the opposite.
> i´ve seen this warning several times, but i cant remember it had anything
> to do with spans
> being configured but not used.
> it always had something to do with timing or even defective cards or
> cabling or even wrong
> settings on providers´ site.
>
> what changes were made to the system so that these warnings occur? or have
> they been
> visible from the very start? do they affect telefony (e.g. loss of calls,
> one side audio only etc.)?
> how much load (concurrent calls) is on the asterisk, does the warning
> occur periodically or
> only a few times?
> these are all questions you should ask yourself to help you find the
> answer yourself... it can
> be very frustrating sometimes, but for me, thats all i can tell about.
>
> regards,
> yves
>
> Am 27.03.2013 13:06, schrieb Salaheddine Elharit:
>
> thank you for your help ,but which configure script and when i can find
> this script  ? in etc/asterisk
>
>
>  best regards
>
> 2013/3/27 Thorsten Göllner <tg at ovm-group.com>
>
>>  You do use only span 1 and 6? So the other ports are not plugged? That
>> is the cause for the warnings. I use a Sangoma E1-Card. The configure
>> script gives me the option "unused" for any port. Maybe your configure
>> script offers you the same option.
>>
>> Am 27.03.2013 11:54, schrieb Salaheddine Elharit:
>>
>> Hi
>>
>>  i use 2 digium cards 1 card with 2 ports and the second card with 4
>> ports
>>
>>
>>
>> but actually i use just the span 1 and span 6
>>
>>
>>
>> Asterisk 1.4-r110474M
>>
>>
>>
>> i use E1 ports
>>
>>
>>  zaptel.conf
>>
>>
>>
>> # Autogenerated by /usr/sbin/zapconf on Wed Feb 20 10:13:17 2013 -- do
>> not hand edit
>>
>> # Zaptel Configuration File
>>
>> #
>>
>> # This file is parsed by the Zaptel Configurator, ztcfg
>>
>> #
>>
>> # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS RED
>>
>> span=1,1,0,ccs,hdb3
>>
>> # termtype: te
>>
>> bchan=1-15,17-31
>>
>> dchan=16
>>
>>
>>  # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS RED
>>
>> span=2,2,0,ccs,hdb3
>>
>> # termtype: te
>>
>> bchan=32-46,48-62
>>
>> dchan=47
>>
>>
>>  # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"
>>
>> # span=3,3,0,ccs,hdb3
>>
>> # termtype: te
>>
>> # bchan=63-77,79-93
>>
>> # dchan=78
>>
>>
>>  # Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"
>>
>> # span=4,4,0,ccs,hdb3
>>
>> # termtype: te
>>
>> # bchan=94-108,110-124
>>
>> # dchan=109
>>
>>
>>  # Span 5: TE2/1/1 "T2XXP (PCI) Card 1 Span 1"
>>
>> span=5,5,0,ccs,hdb3
>>
>> # termtype: te
>>
>> bchan=125-139,141-155
>>
>> dchan=140
>>
>>
>>  # Span 6: TE2/1/2 "T2XXP (PCI) Card 1 Span 2"
>>
>> span=6,6,0,ccs,hdb3
>>
>> # termtype: te
>>
>> bchan=156-170,172-186
>>
>> dchan=171
>>
>>
>>  # Global data
>>
>>
>>  loadzone = us
>>
>> defaultzone = us
>>
>>
>>
>>
>>  etc/asterisk/zapata.conf
>>
>>
>>  [channels]
>>
>> context=default
>>
>> hidecallerid=no
>>
>> callwaiting=yes
>>
>> usecallingpres=yes
>>
>> callwaitingcallerid=yes
>>
>> threewaycalling=yes
>>
>> transfer=yes
>>
>> canpark=yes
>>
>> cancallforward=yes
>>
>> callreturn=yes
>>
>> rxgain=0.0
>>
>> txgain=0.0
>>
>>
>>  group=1
>>
>> switchtype=euroisdn
>>
>> signalling=pri_cpe
>>
>> callgroup=1
>>
>> pickupgroup=1
>>
>> immediate=no
>>
>> channel => 1-15,17-31
>>
>>
>>  group=2
>>
>> callgroup=2
>>
>> switchtype=qsig
>>
>> signalling=pri_net
>>
>> callerid=mycallerid
>>
>> immediate=no
>>
>> channel => 156-170
>>
>> channel => 172-176
>>
>> channel => 125-139
>>
>> channel => 141-155
>>
>>
>>  thanks and regards
>>
>>
>>
>> 2013/3/27 Yves A. <yves030 at gmx.de>
>>
>>>  Am 26.03.2013 17:57, schrieb Salaheddine Elharit:
>>>
>>> Hello,
>>>
>>>   i have all the time this warning i use asterisk 1.4 all works without
>>> issue i don't have any problem (i can use the inbound and outbound calls
>>> without issue)
>>>
>>>  i just want to know what is this WARNING
>>>
>>>  thanks and regards
>>>
>>>
>>>   WARNING[28151]: chan_zap.c:2404 pri_find_dchan: No D-channels
>>> available!  Using Primary channel 140 as D-channel anyway!
>>>
>>>
>>> this can have different causes... mostly a wrong setting in your zaptel
>>> configuration file... this could be e.g.
>>> mixing american / european settings (e1/t1),
>>> wrong timing settings,
>>> wrong master / source clock setting,
>>> [...]
>>> post more details... what span (e1 or t1), which hardware, driver
>>> version, asterisk version, config files...
>>>
>>>
>>> regards,
>>>
>>
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130327/31d425e8/attachment.htm>