[asterisk-users] Asterisk 11, hangup-handlers, Local channels and channel originate

[Olivier]

2013/3/25 Olivier <oza_4h07 at yahoo.fr>

>
>
> 2013/3/25 Matthew Jordan <mjordan at digium.com>
>
>> On 03/25/2013 05:17 PM, Olivier wrote:
>> > Hello,
>> >
>> > I'm giving  hangup-handlers a try on a new Asterisk 11.2.1 setup.
>> > My plan is to use this handler to update my CDRs with values such as
>> > Asterish and Tech cause (see function HANGUP_CAUSE).
>> > I want to have my custom hangup-handler be run only once and when "the
>> > second channel" hangs up.
>> >
>> > At the moment, I'm issuing a couple of  "channel originate
>> > Local/1 at mycontext1 extension 123456789 at mycontext2" commands.
>> >
>> > I'm observing that as I'm using expressions such as Local/1 at mycontext1,
>> > a Local <ZOMBIE> channel is hanged before the second channel stops
>> ringing.
>> > When the second channel itself ends, my  handler is not run anymore.
>> >
>> >
>> > What would you suggest me to do ?
>> > Should I delay my Set(CHANNEL(hangup_handler_wipe)= ...) statement till
>> > both channels are bridged together ?
>> >
>>
>> It is hard to say without seeing the dialplan that you're using. Most
>> likely, the hangup handler has been attached to one half of the Local
>> channel as opposed to the channel you want it attached to. Can you
>> include the full dialplan that you're using?
>>
>
> Yes, of course.
> I'll simplify it and post it here ASAP.
>

Here it is:

[hangup-handler]
exten => s,1,Verbose(0,Entering context ${CONTEXT} in channel ${CHANNEL}
with EXTEN and CID set to ${EXTEN} and ${CALLERID(num)})


[to-foobar]
exten => _X.,1,Verbose(0,Entering context ${CONTEXT} with EXTEN and CID set
to ${EXTEN} and ${CALLERID(num)})
  same => n, Set(CHANNEL(hangup_handler_push)=hangup-handler,s,1)
  same => n, Dial(SIP/foobar/${EXTEN})
  same => n, Hangup()


[from-foobar]
exten => _X.,1,Verbose(0,Entering context ${CONTEXT} with EXTEN and CID set
to ${EXTEN} and ${CALLERID(num)})
  same => n, Dial(SIP/foobar/${EXTEN})
  same => n, Hangup()


The command I used is :
channel originate Local/7005 at from-foobar extension 7003 at to-foobar

Console prints:
Entering context from-foobar with EXTEN and CID set to 7005 and
Entering context to-foobar with EXTEN and CID set to 7003 and
Entering context hangup-handler in channel
Local/7005 at from-foobar-00000008;1<ZOMBIE>
with EXTEN and CID set to s and

The first line is printed at soon as Enter key is pressed.
The second and third lines are printed when originating channel answers
(here extension SIP/foobar/7005)



>
>>
>> Matt
>>
>> --
>> Matthew Jordan
>> Digium, Inc. | Engineering Manager
>> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
>> Check us out at: http://digium.com & http://asterisk.org
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>                http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130325/1ebb9889/attachment.htm>