[asterisk-users] Executing Script after MixMonitor is called

Gopalakrishnan N gopalakrishnan.an at gmail.com
Fri Jul 5 13:45:39 CDT 2013 

I tried with the ^ symbol but still there is no success.

And regards to the path, actually my file is in path /root, is that to be
in /usr/sbin or somewhere?

Basically am able to see the application executed in the CLI, like the
below,

 Executing [4090 at test:1] Set("SIP/4092-0000003b",
"START_TIME=2013-07-05_14:43:11") in new stack
    -- Executing [4090 at test:2] Set("SIP/4092-0000003b",
"MIXMONITOR_FILENAME=4090-2013-07-05_14:43:11-OUT") in new stack
    -- Executing [4090 at test:3] MixMonitor("SIP/4092-0000003b",
"IND_PRI/4092/OUT/2013-07/05/4090-2013-07-05_14:43:11-OUT.wav,b,/root/flac.sh
4090-2013-07-05_14:43:11-OUT") in new stack
    -- Executing [4090 at test:4] Set("SIP/4092-0000003b",
"CDR(userfield)=/var/spool/asterisk/monitor/IND_PRI/4092/OUT/2013-07/05/4090-2013-07-05_14:43:11-OUT.wav")
in new stack
    -- Executing [4090 at test:5] Dial("SIP/4092-0000003b", "SIP/4090,30") in
new stack
  == Using SIP RTP CoS mark 5
  == Begin MixMonitor Recording SIP/4092-0000003b
    -- Called SIP/4090
    -- SIP/4090-0000003c is ringing
    -- SIP/4090-0000003c answered SIP/4092-0000003b
    -- fixed jitterbuffer created on channel SIP/4090-0000003c
    -- fixed jitterbuffer created on channel SIP/4092-0000003b
    -- Executing [h at test:1] MYSQL("SIP/4092-0000003b", "Connect connid
localhost root Iopex1063 Logs") in new stack
    -- Executing [h at test:2] MYSQL("SIP/4092-0000003b", "Query resultid 1
insert into
call_log(accountcode,start,end,src,dst,uniqueid,userfield,hangupcause)
values("4092","2013-07-05
14:43:11",now(),30993091,4090,1373049791.59,"/var/spool/asterisk/monitor/IND_PRI/4092/OUT/2013-07/05/4090-2013-07-05_14:43:11-OUT.wav",16)")
in new stack
    -- Executing [h at test:3] MYSQL("SIP/4092-0000003b", "Disconnect 1") in
new stack
    -- fixed jitterbuffer destroyed on channel SIP/4090-0000003c
  == Spawn extension (test, 4090, 5) exited non-zero on 'SIP/4092-0000003b'
    -- fixed jitterbuffer destroyed on channel SIP/4092-0000003b
  == MixMonitor close filestream
  == *Executing [/root/flac.sh 4090-2013-07-05_14:43:11-OUT]*
  == End MixMonitor Recording SIP/4092-0000003b

But the file is not converted, I suspect it could be a path issue.



Regards


On Fri, Jul 5, 2013 at 10:59 AM, Satish Barot <satish4asterisk at gmail.com>wrote:

> On Fri, Jul 5, 2013 at 1:45 AM, Gopalakrishnan N <
> gopalakrishnan.an at gmail.com> wrote:
>
>> exten => _4X.,1,Set(START_TIME=${STRFTIME(${EPOCH},,%Y-%m-%d_%H:%M:%S)})
>> exten => _4X.,n,Set(MIXMONITOR_FILENAME=${EXTEN}-${START_TIME}-OUT)
>> ;exten =>
>> _4X.,n,MixMonitor(IND_PRI/${CDR(accountcode)}/OUT/${STRFTIME(${EPOCH},,%Y-%m)}/${STRFTIME(${EPOCH},,%d)}/${MIXMONITOR_FILENAME}.wav,m,/root/flac.sh
>> ${MIXMONITOR_FILENAME}.wav)
>> exten =>
>> _4X.,n,MixMonitor(IND_PRI/${CDR(accountcode)}/OUT/${STRFTIME(${EPOCH},,%Y-%m)}/${STRFTIME(${EPOCH},,%d)}/${MIXMONITOR_FILENAME}.wav,b,/root/flac.sh
>> ${MIXMONITOR_FILENAME}.wav)
>> exten =>
>> _4X.,n,Set(CDR(userfield)=IND_PRI/${CDR(accountcode)}/OUT/${STRFTIME(${EPOCH},,%Y-%m)}/${STRFTIME(${EPOCH},,%d)}/${MIXMONITOR_FILENAME})
>> exten => _4X.,n,Dial(SIP/${EXTEN},30)
>> exten => _4X.,n,Hangup
>>
>> Regards
>> On 4 Jul 2013 11:18, "Satish Barot" <satish4asterisk at gmail.com> wrote:
>>
>>> On Thu, Jul 4, 2013 at 1:30 AM, Gopalakrishnan N <
>>> gopalakrishnan.an at gmail.com> wrote:
>>>
>>>> I tried with hangup cause but my script is not executed... also I tried
>>>> the same script with mix monitor itself no sucess.
>>>>
>>>> The script what I have is, am converting wav file to flac format..
>>>> On 11 Jun 2013 11:17, "Satish Barot" <satish4asterisk at gmail.com> wrote:
>>>>
>>>>> And yes if you want to use System application in your dialplan then
>>>>> have System in your h extension
>>>>>
>>>>> System(/PathToSox/sox -r 8000 -c 1 /PathToWavFile/filename.wav /PathToMp3FileToBE Stored/filename.mp3)
>>>>>
>>>>>
>>>>>
>>>>> On Tue, Jun 11, 2013 at 10:38 AM, Satish Barot <
>>>>> satish4asterisk at gmail.com> wrote:
>>>>>
>>>>>> Hi Gopamkrishnan,
>>>>>>
>>>>>> Check the 'command' argument for Mixmonitor. Mixmonitor itself has a
>>>>>> facility to execute a command when recording is over.
>>>>>>
>>>>>> *In my case, 'wav2mp3' is a script which gets executed and converts recorded wav audio file to mp3. I pass ${FILENAME} as an argument to my script.*
>>>>>>
>>>>>> *You should have something like *MixMonitor(filename.wav,m,/PathToYourScript/YourScriptName^filename.wav) in your dialplan.
>>>>>>
>>>>>>
>>>>>> Hope this helps.
>>>>>>
>>>>>> --Satish Barot
>>>>>>
>>>>>>
>>>>>> Ahmedabad, India
>>>>>>
>>>>>>
>>>>>> On Tue, Jun 11, 2013 at 9:31 AM, Gopalakrishnan N <
>>>>>> gopalakrishnan.an at gmail.com> wrote:
>>>>>>
>>>>>>> Hi Satish,
>>>>>>>
>>>>>>> I tried with sox, without any parameter, just sox filename.wav to
>>>>>>> filename.mp3, in linux shell prompt... the file is been converted...
>>>>>>>
>>>>>>> Now If i want to run that command using dialplan,
>>>>>>>
>>>>>>> MixMonitor(filename.wav,m)
>>>>>>> Monitor_Exec(sox filename.wav filename.mp3)
>>>>>>>
>>>>>>> Or to use System command?
>>>>>>>
>>>>>>> Regards..
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Jan 27, 2012 at 11:29 AM, Satish Barot <
>>>>>>> satish4asterisk at gmail.com> wrote:
>>>>>>>
>>>>>>>> This is how I use a wav to mp3 script on Mixmonitor in my dialplan
>>>>>>>> (Asterisk 1.8.7.0).
>>>>>>>> ...
>>>>>>>> same => n,MixMonitor(${FILENAME},W(4),/var/spool/asterisk/wav2mp3
>>>>>>>> ^{FILENAME})
>>>>>>>> ...
>>>>>>>> and my script is...
>>>>>>>>
>>>>>>>> #!/bin/bash
>>>>>>>>
>>>>>>>> WAV="/var/spool/asterisk/monitor/$1"
>>>>>>>> MP3=$(echo $1 | sed 's/\.wav$/.mp3/')
>>>>>>>> MP3DEST="/var/spool/asterisk/mp3/$MP3"
>>>>>>>> /usr/bin/lame "${WAV}" "${MP3DEST}" --silent -b 16 -s 9.6 -m m
>>>>>>>> --bitwidth 8 --lowpass 9.6 --resample 8 --lowpass-width 1
>>>>>>>>
>>>>>>>> --SATISH BAROT
>>>>>>>> Ahmedabad,India.
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Jan 25, 2012 at 8:59 PM, Faraj Khasib <
>>>>>>>> fkhasib at iconnecths.com> wrote:
>>>>>>>>
>>>>>>>>> Hello Guys,
>>>>>>>>> I am trying to convert files that are .wac to mp3 after mixmonitor
>>>>>>>>> command is called but it doesnt execute the command, I tried the command in
>>>>>>>>> terminal it worked, any help please ... below is my dial plan
>>>>>>>>> exten=6500,n,Set(MIXMONITOR_EXEC=&& nice -n 19 /usr/local/bin/lame
>>>>>>>>> -b 8 -t -F -m m --bitwidth 8 --quiet
>>>>>>>>> "/var/spool/asterisk/monitor/${CALLFILENAME}.wav"
>>>>>>>>> "/var/spool/asterisk/monitor/${CALLFILENAME}.mp3" && rm -f
>>>>>>>>> "/var/spool/asterisk/monitor/${CALLFILENAME}.wav")
>>>>>>>>> exten=6500,n,MixMonitor(${CALLFILENAME}.wav,b)
>>>>>>>>>
>>>>>>>>>
>>>>
>>> Show your latest dialplan and script.
>>>
>>> --Satish Barot
>>> Ahmedabad, India
>>>
>>>
>>>
> Some observations,
> (1) You are missing ^ in command in Mixmonitor.In your case, It should be
> something like
> MixMonitor(IND_PRI/${CDR(accountcode)}/OUT/${STRFTIME(${EPOCH},,%Y-%m)}/${STRFTIME(${EPOCH},,%d)}/${MIXMONITOR_FILENAME}.wav,m,/root/flac.sh
> ^${MIXMONITOR_FILENAME}.wav)
> (2) You are passing just file name as a parameter in your script and not a
> full path for file. (Do you handle full path in a script?)
>
> --Satish Barot
> Ahmedabad, India
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130706/56ff658f/attachment.htm>

More information about the asterisk-users mailing list