[asterisk-users] Executing Script after MixMonitor is called

[Gopalakrishnan N]

exten => _4X.,1,Set(START_TIME=${STRFTIME(${EPOCH},,%Y-%m-%d_%H:%M:%S)})
exten => _4X.,n,Set(MIXMONITOR_FILENAME=${EXTEN}-${START_TIME}-OUT)
;exten =>
_4X.,n,MixMonitor(IND_PRI/${CDR(accountcode)}/OUT/${STRFTIME(${EPOCH},,%Y-%m)}/${STRFTIME(${EPOCH},,%d)}/${MIXMONITOR_FILENAME}.wav,m,/root/flac.sh
${MIXMONITOR_FILENAME}.wav)
exten =>
_4X.,n,MixMonitor(IND_PRI/${CDR(accountcode)}/OUT/${STRFTIME(${EPOCH},,%Y-%m)}/${STRFTIME(${EPOCH},,%d)}/${MIXMONITOR_FILENAME}.wav,b,/root/flac.sh
${MIXMONITOR_FILENAME}.wav)
exten =>
_4X.,n,Set(CDR(userfield)=IND_PRI/${CDR(accountcode)}/OUT/${STRFTIME(${EPOCH},,%Y-%m)}/${STRFTIME(${EPOCH},,%d)}/${MIXMONITOR_FILENAME})
exten => _4X.,n,Dial(SIP/${EXTEN},30)
exten => _4X.,n,Hangup

Regards
On 4 Jul 2013 11:18, "Satish Barot" <satish4asterisk at gmail.com> wrote:

> On Thu, Jul 4, 2013 at 1:30 AM, Gopalakrishnan N <
> gopalakrishnan.an at gmail.com> wrote:
>
>> I tried with hangup cause but my script is not executed... also I tried
>> the same script with mix monitor itself no sucess.
>>
>> The script what I have is, am converting wav file to flac format..
>> On 11 Jun 2013 11:17, "Satish Barot" <satish4asterisk at gmail.com> wrote:
>>
>>> And yes if you want to use System application in your dialplan then have
>>> System in your h extension
>>>
>>> System(/PathToSox/sox -r 8000 -c 1 /PathToWavFile/filename.wav /PathToMp3FileToBE Stored/filename.mp3)
>>>
>>> On Tue, Jun 11, 2013 at 10:38 AM, Satish Barot <
>>> satish4asterisk at gmail.com> wrote:
>>>
>>>> Hi Gopamkrishnan,
>>>>
>>>> Check the 'command' argument for Mixmonitor. Mixmonitor itself has a
>>>> facility to execute a command when recording is over.
>>>>
>>>> *In my case, 'wav2mp3' is a script which gets executed and converts recorded wav audio file to mp3. I pass ${FILENAME} as an argument to my script.*
>>>>
>>>> *You should have something like *MixMonitor(filename.wav,m,/PathToYourScript/YourScriptName^filename.wav) in your dialplan.
>>>>
>>>> Hope this helps.
>>>>
>>>> --Satish Barot
>>>>
>>>>
>>>> Ahmedabad, India
>>>>
>>>>
>>>> On Tue, Jun 11, 2013 at 9:31 AM, Gopalakrishnan N <
>>>> gopalakrishnan.an at gmail.com> wrote:
>>>>
>>>>> Hi Satish,
>>>>>
>>>>> I tried with sox, without any parameter, just sox filename.wav to
>>>>> filename.mp3, in linux shell prompt... the file is been converted...
>>>>>
>>>>> Now If i want to run that command using dialplan,
>>>>>
>>>>> MixMonitor(filename.wav,m)
>>>>> Monitor_Exec(sox filename.wav filename.mp3)
>>>>>
>>>>> Or to use System command?
>>>>>
>>>>> Regards..
>>>>>
>>>>>
>>>>> On Fri, Jan 27, 2012 at 11:29 AM, Satish Barot <
>>>>> satish4asterisk at gmail.com> wrote:
>>>>>
>>>>>> This is how I use a wav to mp3 script on Mixmonitor in my dialplan
>>>>>> (Asterisk 1.8.7.0).
>>>>>> ...
>>>>>> same => n,MixMonitor(${FILENAME},W(4),/var/spool/asterisk/wav2mp3
>>>>>> ^{FILENAME})
>>>>>> ...
>>>>>> and my script is...
>>>>>>
>>>>>> #!/bin/bash
>>>>>>
>>>>>> WAV="/var/spool/asterisk/monitor/$1"
>>>>>> MP3=$(echo $1 | sed 's/\.wav$/.mp3/')
>>>>>> MP3DEST="/var/spool/asterisk/mp3/$MP3"
>>>>>> /usr/bin/lame "${WAV}" "${MP3DEST}" --silent -b 16 -s 9.6 -m m
>>>>>> --bitwidth 8 --lowpass 9.6 --resample 8 --lowpass-width 1
>>>>>>
>>>>>> --SATISH BAROT
>>>>>> Ahmedabad,India.
>>>>>>
>>>>>>
>>>>>> On Wed, Jan 25, 2012 at 8:59 PM, Faraj Khasib <fkhasib at iconnecths.com
>>>>>> > wrote:
>>>>>>
>>>>>>> Hello Guys,
>>>>>>> I am trying to convert files that are .wac to mp3 after mixmonitor
>>>>>>> command is called but it doesnt execute the command, I tried the command in
>>>>>>> terminal it worked, any help please ... below is my dial plan
>>>>>>> exten=6500,n,Set(MIXMONITOR_EXEC=&& nice -n 19 /usr/local/bin/lame
>>>>>>> -b 8 -t -F -m m --bitwidth 8 --quiet
>>>>>>> "/var/spool/asterisk/monitor/${CALLFILENAME}.wav"
>>>>>>> "/var/spool/asterisk/monitor/${CALLFILENAME}.mp3" && rm -f
>>>>>>> "/var/spool/asterisk/monitor/${CALLFILENAME}.wav")
>>>>>>> exten=6500,n,MixMonitor(${CALLFILENAME}.wav,b)
>>>>>>>
>>>>>>>
>>
> Show your latest dialplan and script.
>
> --Satish Barot
> Ahmedabad, India
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130705/0937adc0/attachment.htm>