[asterisk-users] Asterisk trunking between two location
Asghar Mohammad
asghar144 at gmail.com
Tue Jul 2 15:35:30 CDT 2013
yes you can. just create trunks on both side with static ip and in dial use
trunk name.
exten => _X.,1,Dial(SIP/trunka/${EXTEN}) on side b and exten =>
_X.,1,Dial(SIP/trunkb/${EXTEN}) on side a.
make a call from a to b and one from b to and post cli log here or upload
anyware else.
On Tue, Jul 2, 2013 at 10:25 PM, Gopalakrishnan N <
gopalakrishnan.an at gmail.com> wrote:
> can't we use without register command both way as peer to peer?
>
>
> On Wed, Jul 3, 2013 at 1:45 AM, Asghar Mohammad <asghar144 at gmail.com>wrote:
>
>> 1. you permiting 10.10.10.0 on b but you should permit 10.30.2.0 on b and
>> 10.10.10.0 on a.
>> 2. use host=dynamic type=friend on side A and host=ip type=peer on side
>> B.
>> 3. general section in sip.conf of side B register with server A.
>>
>> please see comments in sip.conf
>> ;dynamic_exclude_static = yes ; Disallow all dynamic hosts from
>> registering
>> ; as any IP address used for staticly
>> defined
>> ; hosts. This helps avoid the
>> configuration
>> ; error of allowing your users to
>> register at
>> ; the same address as a SIP provider.
>>
>>
>>
>> On Tue, Jul 2, 2013 at 10:04 PM, Gopalakrishnan N <
>> gopalakrishnan.an at gmail.com> wrote:
>>
>>> [servera]
>>> type=friend
>>> username=servera
>>> secret=servera
>>> host=10.30.2.5
>>> port=5060
>>> context=Manila
>>> insecure=port,invite
>>> dtmfmode=rfc2833
>>> relaxdtmf=yes
>>> directmedia=no
>>> qualify=yes
>>> disallow=all
>>> allow=g729
>>> allow=ulaw
>>> allow=alaw
>>> deny=0.0.0.0/0.0.0.0
>>> permit=10.30.2.5/255.255.255.0
>>>
>>> If i use host=dynamic, it wont communicate each other and will result to
>>> unmonitored....
>>>
>>>
>>> and the IP segment is two different segment. where am able to ping each
>>> other.
>>>
>>>
>>>
>>> On Wed, Jul 3, 2013 at 1:29 AM, Asghar Mohammad <asghar144 at gmail.com>wrote:
>>>
>>>> hi,
>>>> paste server a trunk also, if you want register why you are not using
>>>> host=dynamic?
>>>> both servers are on 10.10.10.0 ? if no then check your deny permit
>>>> seting.
>>>>
>>>>
>>>> On Tue, Jul 2, 2013 at 9:53 PM, Gopalakrishnan N <
>>>> gopalakrishnan.an at gmail.com> wrote:
>>>>
>>>>> Also tried one more scenario, particularly from one IP to other IP not
>>>>> registering.
>>>>>
>>>>> For example like 10.10.10.5 to 10.20.10.5
>>>>>
>>>>> If it is 10.10.10.5 to 10.30.2.5 - working
>>>>> If it is 10.30.2.5 to 10.20.10.4 works fine.
>>>>>
>>>>> really strange... I suspect some issue on the network side...
>>>>>
>>>>> Problem is there is no packet loss.. with mtr it is fine, tracepath is
>>>>> fine, ping is fine... :(
>>>>>
>>>>>
>>>>> On Wed, Jul 3, 2013 at 1:05 AM, Gopalakrishnan N <
>>>>> gopalakrishnan.an at gmail.com> wrote:
>>>>>
>>>>>> Am using Asterisk 11.2 in one location and 11.1 in another location.
>>>>>>
>>>>>> when I trunk between two servers, the status is unreachable.
>>>>>>
>>>>>> But with different server with 11.2 and 11.2 it works fine.
>>>>>>
>>>>>> I tried both IAX and SIP.
>>>>>>
>>>>>> the trunk in sip.conf what i have is,
>>>>>> [serverb]
>>>>>> type=friend
>>>>>> username=serverb
>>>>>> secret=serverb
>>>>>> host=10.10.10.5
>>>>>> port=5060
>>>>>> context=default
>>>>>> insecure=port,invite
>>>>>> dtmfmode=rfc2833
>>>>>> relaxdtmf=yes
>>>>>> directmedia=no
>>>>>> qualify=3000
>>>>>> nat=force_rport,comedia
>>>>>> disallow=all
>>>>>> allow=g729
>>>>>> allow=ulaw
>>>>>> allow=alaw
>>>>>> deny=0.0.0.0/0.0.0.0
>>>>>> permit=10.10.10.5/255.255.255.0
>>>>>>
>>>>>> Is there any issue with 11.1?
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>> http://www.asterisk.org/hello
>>>>>
>>>>> asterisk-users mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>> http://www.asterisk.org/hello
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>> http://www.asterisk.org/hello
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130702/5645dfe8/attachment.htm>
More information about the asterisk-users
mailing list