[asterisk-users] Trouble phoning via HUAWEI E169

[Olivier]

2012/9/13 Benedikt Schöffmann <benedikt.schoeffmann at gmail.com>

> Hi there,
>
> I'm setting up a Asterisk network and I ran into  some problems ... as you
> might have guessed :)
>
> The set up is like this:
> Internal Communication in the company should be handled through softphones
> over an asterisk server (works).
> Outbound Communication should be handled through a HUAWEI E169 stick,
> accessed by the chan_dongle project.
> http://code.google.com/p/asterisk-chan-dongle/
>
> When I call internal numbers, everything works fine, but when I try to
> access outside, I get the following error:
>  == Using SIP RTP CoS mark 5
>     -- Executing [06766770031 at internal:1] Answer("SIP/1001-00000023", "")
> in new stack
>     -- Executing [06766770031 at internal:2] Dial("SIP/1001-00000023",
> "dongle0/r1/06766770031,20,r") in new stack
> [Sep 13 11:33:31] WARNING[9835]: channel.c:5603 ast_request: No channel
> type registered for 'dongle0'
> [Sep 13 11:33:31] WARNING[9835]: app_dial.c:2218 dial_exec_full: Unable to
> create channel of type 'dongle0' (cause 66 - Channel not implemented)
>   == Everyone is busy/congested at this time (1:0/0/1)
>     -- Executing [06766770031 at internal:3] Hangup("SIP/1001-00000023", "")
> in new stack
>   == Spawn extension (internal, 06766770031, 3) exited non-zero on
> 'SIP/1001-00000023'
>
> From googling my way around, I know this type of error normally relates to
> a module not being loaded, but chan_dongle.so shows up when I type a
> "module show". I've been fiddling around with this for days and frankly I
> don't really know where the problem could lie.
>
> Below are excerpts from sip.conf and extensions.conf
>
> SIP.conf
> <code>
> [general]
> bindport = 5060
> bindaddr = 192.168.61.25
> tcpbindaddr = 192.168.61.25
> tcpenable = yes
> context = internal
> transport = udp
> disallow = all
> allow = gsm
> allow = ulaw
> allow = alaw
>
> [dongle0]
> type=friend
> context=internal
> audio=/dev/ttyUSB1
> data=/dev/ttyUSB2
> imei=359638011610601
> imsi=232018830482446
> transport=udp
> disallow = all
> allow = gsm
> allow = ulaw
> allow = alaw
>
> [1000]
> type=friend
> callerid = "Benny" <1000>
> secret=1000
> host=dynamic
> canreinvite=no
> dtmfmode=rfc2833
> mailbox=1000
> disallow=all
> allow=gsm
> allow=ulaw
> allow=alaw
> transport=udp
> context=internal
>
> [1001]
> type=friend
> callerid = "Timme" <1001>
> secret=1001
> host=dynamic
> canreinvite=no
> dtmfmode=rfc2833
> mailbox=1001
> disallow=all
> allow=gsm
> allow=ulaw
> allow=alaw
> </code>
>
> Extensions.conf
> <code>
> [internal]
> ; for 4-digit numbers, assume it's a SIP number in our own context
> ; call it
> exten => _XXXX,1,Answer()
> exten => _XXXX,n,Dial(SIP/${EXTEN},20,r)
> exten => _XXXX,n,Hangup
>
> ; else
> ; for a number starting with zero try to call via Dongle
> exten => _0X.,1,Answer()
> exten => _0X.,n,Dial(dongle0/r1/${EXTEN},20,r)
> exten => _0x.,n,Hangup
>
> </code>
>
> Please shed some light on this .....
>
> Kind regards,
> Benedikt
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


I've never tried chan_dongle, but to me, the Dial statement is incorrect.
Maybe the following would be better:

exten => _0X.,n,Dial(dongle/dongle0/r1/${EXTEN},20,r)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120913/56099fa6/attachment.htm>