[asterisk-users] Can run from shell but not from Asterisk System command

[Ishfaq Malik]

On Fri, 2012-05-11 at 03:32 +0000, Klaverstyn, David C wrote:
> Hi All,
> 
>  
> 
> I have this strange problem on a newly installed PBX.  1.8.12.0.  I
> have other installs of 1.8.12.0 that does not exhibit this problem.
> 
>  
> 
> I can run from the console
> 
> /usr/sbin/fax2mail --cid-name "Console Execuation" --cid-number
> 61123123 --dest-exten 8960 -f /var/spool/asterisk/fax/1336702728.59
> 
>  
> 
> … and an email will be emailed to me.
> 
>  
> 
> The following does not produce an email.
> 
> exten => 1122,1,Answer
> 
> exten => 1122,n,System(/usr/sbin/fax2mail --cid-name "Console
> Execuation" --cid-number 61123123 --dest-exten 8960
> -f /var/spool/asterisk/fax/1336702728.59)
> 
> exten => 1122,n,HangUp
> 
>  
> 
> result from CLI
> 
>   == Using SIP RTP CoS mark 5
> 
>     -- Executing [1122 at internal:1] Answer("SIP/8930-0000002b", "") in
> new stack
> 
>     -- Executing [1122 at internal:2] System("SIP/8930-0000002b",
> "/usr/sbin/fax2mail --cid-name "Console Execuation" --cid-number
> 61735108900 --dest-exten 8960
> -f /var/spool/asterisk/fax/1336702728.59") in new stack
> 
>     -- Executing [1122 at internal:3] Hangup("SIP/8930-0000002b", "") in
> new stack
> 
>   == Spawn extension (internal, 1122, 3) exited non-zero on
> 'SIP/8930-0000002b'
> 
>  
> 
> The log files that the fax2mail script generates are all correct but
> no email.
> 
> Regards
> 
> David Klaverstyn
> 
> 
> 
>  

Can you change user to the asterisk user and execute the command from
there?





-- 
Ishfaq Malik <ish at pack-net.co.uk>
Department: VOIP Support
Company: Packnet Limited
t: +44 (0)845 004 4994
f: +44 (0)161 660 9825
e: ish at pack-net.co.uk
w: http://www.pack-net.co.uk

Registered Address: PACKNET LIMITED, 2A ENTERPRISE HOUSE, LLOYD STREET
NORTH, MANCHESTER
SCIENCE PARK, MANCHESTER, M156SE
COMPANY REG NO. 04920552