[asterisk-users] Belgian BRI (euroisdn): what to use for a B410P

[Bart Coninckx]

Right you are,

but when using bri_cpe I get:

[May  9 23:08:45] WARNING[2775]: sig_pri.c:6969 pri_dchannel: PRI Error 
on span 4: Received MDL/TEI managemement message, but configured for 
mode other than PTMP!

This repeats itself every second.

The

bri_cpe_ptmp

settings seems to give the least troubles, but no calling possible,

BC



On 05/09/12 22:10, Richard Mudgett wrote:
>> Hi Khalid,
>>
>> my setup is almost identical
>>
>> except for
>> loadzone = be
>> defaultzone = be
>>
>> (obviously)
>>
>> and in
>>
>> chan_dahdi.conf:
>>
>> [isdn4]
>> signaling = bri_cpe_ptmp
>> switchtype = euroisdn
>> group = 2
>> context = isdn
>> dahdichan = 10,11
>>
>>
>> this results into:
>>
>> ERROR[1021]: chan_dahdi.c:14182 dahdi_pri_error: PRI Span: 4 Unable
>> to receive TEI from network in state 2(Assign awaiting TEI)!
>>
>> and after trying to call:
>>
>> May 9 21:25:51] NOTICE[1021]: chan_dahdi.c:3136
>> my_handle_dchan_exception: PRI got event: Alarm (4) on D-channel of
>> span 4
>> [May 9 21:25:51] WARNING[1022]: chan_dahdi.c:7895 handle_alarms:
>> Detected alarm on channel 10: Red Alarm
>> [May 9 21:25:51] WARNING[1022]: chan_dahdi.c:7895 handle_alarms:
>> Detected alarm on channel 11: Red Alarm
>> [May 9 21:25:53] ERROR[1021]: chan_dahdi.c:14182 dahdi_pri_error: PRI
>> Span: 4 Unable to receive TEI from network in state 3(Establish
>> awaiting TEI)!
>> [May 9 21:25:53] NOTICE[1021]: chan_dahdi.c:3136
>> my_handle_dchan_exception: PRI got event: No more alarm (5) on
>> D-channel of span 4
>> [May 9 21:25:53] NOTICE[1022]: chan_dahdi.c:3826 handle_clear_alarms:
>> Alarm cleared on channel 10
>> [May 9 21:25:53] NOTICE[1022]: chan_dahdi.c:3826 handle_clear_alarms:
>> Alarm cleared on channel 11
>>
>>
>> An old Asterisk 1.4 installation with mISDN connected to the same
>> line used ptp, not ptmp. When I used bri_cpe_ptp, I get even more
>> problems on the console however (every second).
> bri_cpe_ptp is not a valid value for the signaling parameter.
>
>  From chan_dahdi.conf.sample:
> ; bri_cpe:        BRI PTP signalling, CPE side
> ; bri_net:        BRI PTP signalling, Network side
> ; bri_cpe_ptmp:   BRI PTMP signalling, CPE side
> ; bri_net_ptmp:   BRI PTMP signalling, Network side
>
> Richard
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                 http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-users