[asterisk-users] Belgian BRI (euroisdn): what to use for a B410P

[Bart Coninckx]

Hi Khalid,

my setup is almost identical

except for
loadzone = be
defaultzone = be

(obviously)

and in

chan_dahdi.conf:

[isdn4]
signaling = bri_cpe_ptmp
switchtype = euroisdn
group = 2
context = isdn
dahdichan = 10,11


this results into:

  ERROR[1021]: chan_dahdi.c:14182 dahdi_pri_error: PRI Span: 4 Unable to 
receive TEI from network in state 2(Assign awaiting TEI)!

and after trying to call:

May  9 21:25:51] NOTICE[1021]: chan_dahdi.c:3136 
my_handle_dchan_exception: PRI got event: Alarm (4) on D-channel of span 4
[May  9 21:25:51] WARNING[1022]: chan_dahdi.c:7895 handle_alarms: 
Detected alarm on channel 10: Red Alarm
[May  9 21:25:51] WARNING[1022]: chan_dahdi.c:7895 handle_alarms: 
Detected alarm on channel 11: Red Alarm
[May  9 21:25:53] ERROR[1021]: chan_dahdi.c:14182 dahdi_pri_error: PRI 
Span: 4 Unable to receive TEI from network in state 3(Establish awaiting 
TEI)!
[May  9 21:25:53] NOTICE[1021]: chan_dahdi.c:3136 
my_handle_dchan_exception: PRI got event: No more alarm (5) on D-channel 
of span 4
[May  9 21:25:53] NOTICE[1022]: chan_dahdi.c:3826 handle_clear_alarms: 
Alarm cleared on channel 10
[May  9 21:25:53] NOTICE[1022]: chan_dahdi.c:3826 handle_clear_alarms: 
Alarm cleared on channel 11


An old Asterisk 1.4 installation with mISDN connected to the same line 
used ptp, not ptmp. When I used bri_cpe_ptp, I get even more problems on 
the console however (every second).

This is why I wondered if DAHDI is supposed to work over here,

cheers,

BC



On 05/09/12 21:14, khalid touati wrote:
> Hi Bart,
> here is a working configuration in Netherlands:
> /etc/dahdi/system.conf:
>
> span = 1,1,0,ccs,ami
> bchan = 1,2
> hardhdlc = 3
>
> span = 2,1,0,ccs,ami
> bchan = 4,5
> hardhdlc = 6
>
> span = 3,1,0,ccs,ami
> bchan = 7,8
> hardhdlc = 9
>
> span = 4,1,0,ccs,ami
> bchan = 10,11
> hardhdlc = 12
>
> loadzone    = nl
> defaultzone    = nl   (of course change those to your country initials)
>
> /etc/asterisk/chan_dahdi.conf:
>
> group = 1
> signalling = bri_cpe_ptmp
> switchtype = euroisdn
> context = mainmenu
> echocancel = yes
> channel => 1,2,4,5,7,8,10,11
>
> I am not using dahdi-channels, hope it helps!
>
>
> On Wed, May 9, 2012 at 1:59 PM, Bart Coninckx 
> <bart.coninckx at telenet.be <mailto:bart.coninckx at telenet.be>> wrote:
>
>     Hi,
>
>     I'm experiencing difficulties to get a B410P running with Asterisk
>     10.3.1 and DAHDI 2.6.1.
>     Am I supposed to use DAHDI for this card and ISDN BRI for my
>     country (Belgium)?
>
>     thx,
>
>     BC
>
>     --
>     _____________________________________________________________________
>     -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>     New to Asterisk? Join us for a live introductory webinar every Thurs:
>     http://www.asterisk.org/hello
>
>     asterisk-users mailing list
>     To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> -- 
> Khalid Touati
> Network Administrator at Endosoft, LLC
> CCNA
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                 http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120509/ec2a4223/attachment.htm>