[asterisk-users] No compatible codecs, not accepting this offer! - after upgrading to 1.8.11

[Eric Wieling]

Do a "sip show peer PEERNAME" and check the codecs allowed for that specific peer.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ricardo Carvalho
Sent: Wednesday, May 09, 2012 11:56 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] No compatible codecs, not accepting this offer! - after upgrading to 1.8.11

That's weird, because it's negotiated with success the codec ulaw for outbound calls through the same SIP trunk.


Besides, ulaw and alaw shows up when i do "core show codecs audio" in the asterisk CLI, and there exists both codec_ulaw.so and codec_alaw.so modules under the path /usr/lib/asterisk/modules/

I don't get it!...

More ideas?

Thanks,
Ricardo.



On Wed, May 9, 2012 at 3:32 PM, A J Stiles <asterisk_list at earthshod.co.uk> wrote:


	On Wednesday 09 May 2012, Ricardo Carvalho wrote:
	
	> [May 8 17:45:30] NOTICE[6444]: chan_sip.c:9188 process_sdp: No compatible
	> codecs, not accepting this offer!
	>
	> Any help?
	
	
	Are you sure you compiled all the codecs you need?
	
	What happens if you run `make menuselect` in both the 1.4 source tree and in
	the 1.8 source tree, "side-by-side" in tabs of the same terminal window?  You
	need at least GSM, A-law and micro-law.
	
	(The above is my preferred method of building a configuration like an existing
	one.  No doubt someone will weigh in with a better way of doing it.)
	
	--
	AJS
	
	Answers come *after* questions.
	
	--
	_____________________________________________________________________
	-- Bandwidth and Colocation Provided by http://www.api-digital.com --
	New to Asterisk? Join us for a live introductory webinar every Thurs:
	              http://www.asterisk.org/hello
	
	asterisk-users mailing list
	To UNSUBSCRIBE or update options visit:
	  http://lists.digium.com/mailman/listinfo/asterisk-users