[asterisk-users] T.38 troubles

[Jean-Denis Girard]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Steve,

Le 26/03/2012 14:50, Steve Underwood a écrit :
> Your log shows the Mediatrix GW has problems. It sends a DCS signal to
> the Asterisk box, but doesn't following it with TCF as it should. The
> asterisk box times out waiting for TCF and tries to take recovery action
> which fails.

Thanks for your analysis. Could it be a configuration problem on the
Mediatrix?

> Spandsp has some workarounds for bugs in Mediatrix boxes. They usually
> work OK.

What would you suggest then, is there anything to do to enable the
workarounds? spandsp-0.0.6pre20 is the latest available, or should I try
spandsp-20120324? As far as I know, there is no firmware update for the
Mediatrix...


Thanks,
- -- 
Jean-Denis Girard

SysNux                  Systèmes  Linux  en Polynésie française
http://www.sysnux.pf/   Tél: +689 50 10 40 / GSM: +689 79 75 27
-----BEGIN PGP SIGNATURE-----

iEYEARECAAYFAk9xFUUACgkQuu7Rv+oOo/jp+QCeMH14GwjoNTWjF7JpTVntv8nr
wbYAn1dik/g+uurccqat/KcQwS8cxxZw
=MQNr
-----END PGP SIGNATURE-----