[asterisk-users] All circuits are busy now on outgoing trunk call

[James Mutuku]

I am still  getting the same error

On 3/21/12, white hat <whitehat238 at gmail.com> wrote:
> Just a guess here, but it looks like you are dialing a 10 digit phone
> number but the dial pattern in your outbound route does not handle that.
>
> Try using a different dial pattern in your outbound route such as:
>
> 1NXXNXXXXXX or 9|1NXXNXXXXXX
>
> I believe that asterisk is telling you that all circuits are busy because
> none of the outbound routes can be matched against the pattern you are
> dialing.
>
> On Wed, Mar 21, 2012 at 12:48 AM, SamyGo <govoiper at gmail.com> wrote:
>
>> This is not in human readable format, but using my special powers I was
>> able to locate the lines
>>
>> -- Called fxosip/0799490994
>> -- SIP/fxosip-00000015 is circuit-busy
>> == Everyone is busy/congested at this time (1:0/1/0)
>>
>> Please enable sip debug for this carrier and then try to send the sip
>> traces in human readable format. From those traces it'd be more clear what
>> is the issue from the carrier end rejecting the calls...Maybe your credit
>> expired !!
>>
>> Regards,
>> Sammy.
>>
>> On Wed, Mar 21, 2012 at 9:36 AM, James Mutuku <listmutuku at gmail.com>wrote:
>>
>>> I have setup  a trunk on freepbx and the outbound route. Everytime I dial
>>> via the trunk, I get "all circuits are busy now". Incoming calls are
>>> working fine on the trunk. This is my dial 9|XXXXXXX. and these are my
>>> peer
>>> details allow=ulaw&alaw canredirect=no disallow=all dtmfmode=rfc2833
>>> host=192.168.9.251 insecure=very type=peer Below are the logs.  my trunk
>>> name is called fxosip Using SIP RTP TOS bits 184 [0K  == Using SIP RTP
>>> CoS
>>> mark 5 [0K    -- Called fxosip/0799490994 [0K    -- SIP/fxosip-00000015
>>> is
>>> circuit-busy [0K  == Everyone is busy/congested at this time (1:0/1/0)
>>> [0K
>>>    -- Executing [s at macro-dialout-trunk:20][1;36mNoOp [0m("
>>> [1;35mSIP/3000-00000014 [0m", [1;35mDial failed for some reason with
>>> DIALSTATUS = CONGESTION and HANGUPCAUSE = 1 [0m") in new stack [0K    --
>>> Executing [s at macro-dialout-trunk:21] [1;36mGoto [0m("
>>> [1;35mSIP/3000-00000014 [0m", [1;35ms-CONGESTION,1 [0m") in new stack [0K
>>>  -- Goto (macro-dialout-trunk,s-CONGESTION,1) [0K    -- Executing
>>> [s-CONGESTION at macro-dialout-trunk:1] [1;36mSet [0m("
>>> [1;35mSIP/3000-00000014 [0m", " [1;35mRC=1 [0m") in new stack [0K    --
>>> Executing [s-CONGESTION at macro-dialout-trunk:2] [1;36mGoto [0m("
>>> [1;35mSIP/3000-00000014 [0m", " [1;35m1,1 [0m") in new stack [0K    --
>>> Goto
>>> (macro-dialout-trunk,1,1) [0K    -- Executing [1 at macro-dialout-trunk:1]
>>> [1;36mGoto [0m(" [1;35mSIP/3000-00000014 [0m", [1;35mcontinue,1 [0m") in
>>> new stack [0K    -- Goto (macro-dialout-trunk,continue,1) [0K    --
>>> Executing [continue at macro-dialout-trunk:1] [1;36mGotoIf [0m("
>>> [1;35mSIP/3000-00000014 [0m", [1;35m1?noreport [0m") in new stack [0K
>>> --
>>> Goto (macro-dialout-trunk,continue,3) [0K    -- Executing
>>> [continue at macro-dialout-trunk:3] [1;36mNoOp [0m("
>>> [1;35mSIP/3000-00000014 [0m", " [1;35mTRUNK Dial failed due to CONGESTION
>>> HANGUPCAUSE: 1 - failing through to other trunks [0m") in new stack [0K
>>>  -- Executing [continue at macro-dialout-trunk:4] [1;36mSet [0m("
>>> [1;35mSIP/3000-00000014 [0m", [1;35mCALLERID(number)=3000 [0m") in new
>>> stack [0K    -- Executing [90722490994 at from-internal:5] [1;36mMacro
>>> [0m(" [1;35mSIP/3000-00000014 [0m", [1;35moutisbusy, [0m") in new stack
>>> [0K
>>>    -- Executing [s at macro-outisbusy:1] [1;36mProgress [0m("
>>> [1;35mSIP/3000-00000014 [0m", " [1;35m [0m") in new stack [0K    --
>>> Executing [s at macro-outisbusy:2] [1;36mGotoIf [0m("
>>> [1;35mSIP/3000-00000014 [0m", [1;35m0?emergency,1 [0m") in new stack [0K
>>>  -- Executing [s at macro-outisbusy:3] [1;36mGotoIf [0m("
>>> [1;35mSIP/3000-00000014 [0m", [1;35m0?intracompany,1 [0m") in new stack
>>> [0K
>>>    -- Executing [s at macro-outisbusy:4] [1;36mPlayback [0m("
>>> [1;35mSIP/3000-00000014 [0m",
>>> [1;35mall-circuits-busy-now&pls-try-call-later, noanswer [0m") in new
>>> stack
>>> [0K    -- <SIP/3000-00000014> Playing 'all-circuits-busy-now.gsm'
>>> (language
>>> 'en') [0K  == Spawn extension (macro-outisbusy, s, 4) exited non-zero on
>>> 'SIP/3000-00000014' in macro 'outisbusy'   == Spawn extension
>>> (from-internal, 90722490994, 5) exited non-zero on 'SIP/3000-00000014'
>>> Best
>>> Regards, James Mutuku Ndeti Agile Systems Limited +254722490994
>>> www.agile.co.ke Has your organization implemented a customer
>>> relationship management (CRM)system? visit
>>> http://www.agile.co.ke/crm.phpand find out how our CRM can help you
>>> achieve better customer satisfaction
>>> and sales
>>> _____________________________________________________________________ --
>>> Bandwidth and Colocation Provided by http://www.api-digital.com -- New
>>> to Asterisk? Join us for a live introductory webinar every Thurs:
>>>      http://www.asterisk.org/hello asterisk-users mailing list To
>>> UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>               http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>


-- 
Best Regards,
James Mutuku Ndeti
Agile Systems Limited
+254722490994
www.agile.co.ke
www.zetu.co.ke

Has your organization implemented a customer relationship management
(CRM)system? visit http://www.agile.co.ke/crm.php and find out how our
CRM can help you achieve better customer satisfaction and sales