[asterisk-users] DAHDI_SPANCONFIG failed on span 1: No such device or address (6)

[RaMaier at gmx.de]

Hi all,

I have problems starting dahdi.
dahdi_cfg -vvv allwasy comes back with:


DAHDI Tools Version - 2.2.1.1

DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
======================

SPAN 1: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Echo Canceler: kb1) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: kb1) (Slaves: 02)
Channel 03: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 03)

3 channels to configure.

DAHDI_SPANCONFIG failed on span 1: No such device or address (6)







I searched the internet but could not yet find a solution.
I already tried to exchange the zaphfc drivers as suggested, but they did not compile.

I actually did not find a new(er) tutorial how to build an Asterisk with a HFC-S card.

Any suggestions / hints / tutorials / links welcome.

Do I need some special drivers in the kernel ?
Modprobe ?
Anything else special I need ?

Thanks
Rainer







Details:

I run Debian 6.0.4 with a fresh 2.6.35 Kernel, most drivers compiled as modules.

I installed the newest Asterisk 10.2.0-rc2 and dahdi_sources and compiled them, but same happened with aptitude install dahdi on older kernel.
download Asterisk -> ./configure -> make -> make install -> make samples
download dahdi.tar.bz2 -> make -> make install


dahdi_hardware:
driver should be 'zaphfc' but is actually 'hfcpci'
pci:0000:00:0d.0     zaphfc+      1397:2bd0 HFC-S ISDN BRI card

-- 
NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone!                                  
Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a