[asterisk-users] Problem with ReceiveFax

[Ishfaq Malik]

On Tue, 2012-03-13 at 00:10 +0800, Larry Moore wrote:
> On 12/03/2012 10:53 PM, Ishfaq Malik wrote:
> > Thanks for the input so far. I'm going to keep plugging away and if 
> > anyone has any insights, they will be gladly appreciated. Ish 
> 
> In SIP Account Configuration on Draytek;
> 
> Set Voice Active Detect to Off
> 
> In Phone Settings on the Draytek;
> 
> Enable Symmetric RTP
> Check Start & End RTP Ports match values set in /etc/asterisk/udptl.conf 
> for udptlstart & udptlend
> 
> In /etc/asterisk/udptl.conf set;
> 
> use_even_ports=yes
> 
Thanks for the above, I was hoping to have replied earlier with a
success message buy alas, no joy to be had.

Could I be having some sort of DTMF issue? I noticed this in amongst the
console output once I set the console logging level to include dtmf

[2012-03-13 12:06:39] DTMF[24784]: channel.c:3976 __ast_read: DTMF end 'f' received on SIP/588-0000000c, duration 0 ms
[2012-03-13 12:06:39] DTMF[24784]: channel.c:4002 __ast_read: DTMF begin emulation of 'f' with duration 100 queued on SIP/588-0000000c
[2012-03-13 12:06:39] DTMF[24784]: channel.c:4138 __ast_read: DTMF end emulation of 'f' queued on SIP/588-0000000c

does the above look correct for an inbound fax?

Thanks in advance (again!)

Ish
-- 
Ishfaq Malik
Software Developer
PackNet Ltd

Office:   0161 660 3062