[asterisk-users] Setting span orders with Astribank and Sangoma A101

[Duncan Turnbull]

Hi All

Just a quick check on the best way to ensure multiple cards/devices load in the correct order.

Asterisk 1.8 with Sangoma A101 had no problems until we introduced an Astribank.

root at pabx377:/etc/asterisk# dahdi_hardware -v

usb:001/004          xpp_usb+     e4e4:1162 Astribank-modular FPGA-firmware

 LABEL=[usb:X1060395]       CONNECTOR=@usb-0000:00:1d.7-3

            XBUS-00/XPD-00: FXS      (14)  Span 2

            XBUS-00/XPD-10: FXS      (8)   Span 3

            XBUS-00/XPD-20: FXS      (8)   Span 4

            XBUS-00/XPD-30: FXS      (8)   Span 5

pci:0000:05:00.0     wanpipe-     1923:0300 Sangoma Technologies Corp. A101 single-port T1/E1


But now they have changed order after reboot to 1-4 and I am guessing that makes the A101 span 5 but I want to make these setting permanent

I see mention of  /etc/dahdi/xpp_order and dahdi_genconf xpporder but will that help me set the spans within Dahdi so they always appear on the same number

Thanks very much

Cheers Duncan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120610/b00bbe8c/attachment.htm>