[asterisk-users] SLA for DAHDI FXO - Emulating Key System Functionality

[Kevin P. Fleming]

On 01/26/2012 09:46 AM, Tim Nelson wrote:
> Greetings-
>
> I currently have a customer that *requires* key-system functionality in an Asterisk PBX. On a SIP phone, the BLF keys need to show the current state of the analog lines attached to the system (DAHDI FXO). By pressing one of these keys (for line 1 for example), the dialed number needs to be dialed out the correct port. Also, when that line is busy, the phone BLF key for that line needs to reflect the status.
>
> I've been reading about SLATrunk but it doesn't seem quite what I'm looking for. Also, I'm looking at using Hints to supply such information, but I'm not sure exactly how it should look.
>
> Has anyone done this before, and if so, how did you implement it? My target is to use Asterisk 1.8 but another version would suffice.

The SLA functionality is exactly what you are looking for.

-- 
Kevin P. Fleming
Digium, Inc. | Director of Software Technologies
Jabber: kfleming at digium.com | SIP: kpfleming at digium.com | Skype: kpfleming
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at www.digium.com & www.asterisk.org