[asterisk-users] FAX Installation in Asterisk

[Steve Underwood]

On 01/13/2012 05:17 PM, mahesh katta wrote:
>
>
>
> On Fri, Jan 13, 2012 at 1:58 PM, Ruben Rögels 
> <ruben.roegels at jumping-frog.org 
> <mailto:ruben.roegels at jumping-frog.org>> wrote:
>
>     Am 12.01.2012 18:50, schrieb mahesh katta:
>     > I was search for free license but for this Digium require
>     purchase any
>     > Hardware then they can provide Free License.
>     > But I have no Digium Device , I am using Grand stream FXO
>     Gateway and
>     > Asterisk.1.8.XX .
>     > I was connected like
>     > PSTN==>FXOGateway==>Asterisk(FXO configure through IP)
>     >
>     > If anything wrong please correct me.
>
>     Hi Mahesh,
>
>     the FreeFax for asterisk is really free and not bound to digium
>     hardware, but it is limited to one concurrent fax session. At
>     least you
>     should be able to try if fax receiving is possible with this setup. As
>     far as I can see, it should work with your setup.
>
>     The URL I posted leads you to the FreeFAX for Asterisk Module.
>
> Sir,Its done.I receive the FAX.Thank you sir.
> One more thing sir if I sent at a time multiple fax to this is it 
> receive. can you clarify me.
> scenario is I have PRI line of 30 channels. one Boarding no.
> if I send this is it receive the fax at a time with single free license.
>
>     best regards,
>     Ruben
>
Remove the Digium FAX module and install SpanDSP. Then the number of 
FAXes you can receive at once will only be limited by the speed of your 
hardware.

Steve