[asterisk-users] asterisk 1.8.8 - caller ID not working.

[Joseph]

On 01/06/12 16:49, Danny Nicholas wrote:
>Check your sip.conf and users.conf - my guess is that the pstn-1270 is an
>assigned value that you need to remove or comment out.

What do you mean "assigned value"

My user.conf:
[general]
fullname = New User
userbase = 6000
hasvoicemail = yes
vmsecret = 1234
hassip = yes
hasiax = yes
hasmanager = no
callwaiting = yes
threewaycalling = yes
callwaitingcallerid = yes
transfer = yes
canpark = yes
cancallforward = yes
callreturn = yes
callgroup = 1
pickupgroup = 1

sip.conf
...
[pstn-1270] 
type=friend
secret=spa3k
username=voice-1270
mailbox=369 
host=dynamic
insecure=port,invite
canreinvite=no ; (dtmf not wroking correctly without this one)
disallow=all     
allow=ulaw       
allow=alaw      
nat=no
context=incoming
callgroup=1
pickupgroup=1

--
Joseph

>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Joseph
>Sent: Friday, January 06, 2012 4:47 PM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: Re: [asterisk-users] asterisk 1.8.8 - caller ID not working.
>
>On 01/06/12 14:44, Danny Nicholas wrote:
>>AFAIK insecure=very has been replaced by insecure=port,invite.  Also,
>>you might want to put wait(2) or progress after answer in the dialplan
>>to allow CID to process.
>
>I've tried putting even "wait(7) it didn't help.
>The problem is I'm getting this error:
>
>WARNING[2344]: chan_sip.c:13930 check_auth: username mismatch, have <11>,
>digest has <pstn-1270>
>NOTICE[2344]: chan_sip.c:21989 handle_request_invite: Failed to authenticate
>device "KMIEC Z" <sip:7804715665 at 10.0.0.110>;tag=1c283128597
>
>--
>Joseph
>
>>
>>-----Original Message-----
>>From: asterisk-users-bounces at lists.digium.com
>>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Joseph
>>Sent: Friday, January 06, 2012 2:39 PM
>>To: Asterisk Users Mailing List - Non-Commercial Discussion
>>Subject: Re: [asterisk-users] asterisk 1.8.8 - caller ID not working.
>>
>>On 01/05/12 21:24, Joseph wrote:
>>>On 01/05/12 22:12, Bruce B wrote:
>>>>     but not it is not working again.
>>>>     I wish they stop screwing up with that Asterisk, they keep
>>>>     introducing new version and more bugs :-/
>>>>
>>>>   Wish not granted !!! :-) You will be the guinea pig to new features
>!!!
>>>>   Same issue with A2Billing connecting to Asterisk. With older version
>>>>   this problem is not there.
>>>>   -Bruce
>>>
>>>Solved it again :-/
>>>This time in sip.conf the pstn line must have:
>>>insecure=very
>>>
>>>I was happy with Asterisk 1.4.39 till Gentoo gurus removed it from
>>>portage
>>under the "vulnerability" umbrella.
>>>I try to stay with portage when it comes to package upgrade it is
>>>easier to manage package but whey they are upgrading new packages and
>>>introducing more bugs I don't like it.  I have to waste my time
>>>hunting for solution and if I'll be lucky I'll find one :-/
>>>
>>>I think I will compile version outside portage and don't have to worry
>>about upgrades version that don't work correctly.
>>>The biggest problem with Linux is frequent updates and screw-ups that
>>>comes
>>with it!
>>>
>>>--
>>>Joseph
>>
>>UPDATE!
>>
>>I have in sip.conf
>>insecure=very
>>
>>but CallerID stop working again :-/
>>
>>I don't know what else to try.
>>
>>--
>>Joseph