[asterisk-users] Asterisk won't start - trap invalid opcode

Wed Jan 4 04:13:14 CST 2012

Hi there

Happy New Year

I have a new install of asterisk 1.8.8.1 on ubuntu server 
3.0.0-14-server #23-Ubuntu SMP Mon Nov 21 20:49:05 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux

It has a Sangoma A200 card and I thought should be fairly standard but I have a new error when trying to start asterisk and I don't really know where to start

Initially asterisk was installed with dahdi from a package but sangoma didn't seem happy. Once I added dahdi from source sangoma wanpipe installed okay, but when I reloaded asterisk it stopped. So I removed all the packages (I believe I have but something could be hanging around) and rebuilt asterisk from source. Same errors. 

The only errors I can see are limited - I also stopped wan router and dahdi and I still get 
~# asterisk -cvvvvvvvvvv
Illegal instruction

Which isn't very informative. Kind of a fun challenge but not one I need right now

Google hasn't been able to find a similar issue 

My choices that I can see are:
- try another version of asterisk - delete everything and start again (which I thought I have tried but maybe not thorough enough)
- earlier version of ubuntu

But I would really like to understand what's clashing.

The sangoma card details are from lspci 

04:03.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card
	Subsystem: NEC Corporation Device 0700
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 255 (1250ns min, 3750ns max)
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K]

Output of dmesg looks fine until it gets to asterisk right at the bottom which gives this
[   13.419761] asterisk[1352] trap invalid opcode ip:5316f3 sp:7fff2db1a0f0 error:0 in asterisk[400000+1d6000]

dmesg long version

[    5.051430] WANPIPE(tm) Hardware Support Module  3.5.24.0 (c) 1994-2010 Sangoma Technologies Inc
[    5.052051] usbcore: registered new interface driver sdlausb
[    5.063329] dahdi: Telephony Interface Registered on major 196
[    5.063334] dahdi: Version: 2.5.0.2
[    5.071841] WANPIPE(tm) Interface Support Module 3.5.24.0 (c) 1994-2010 Sangoma Technologies Inc
[    5.098753] WANPIPE(tm) Multi-Protocol WAN Driver Module 3.5.24.0 (c) 1994-2010 Sangoma Technologies Inc
[    5.098759] wanpipe: Probing for WANPIPE hardware.
[    5.098846] pci 0000:04:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    5.110126] wanpipe: AFT-A200-SH PCI FXO/FXS card found (HDLC rev.7), cpu(s) 1, bus #4, slot #3, irq #5
[    5.110137] wanpipe: Allocating maximum 1 devices: wanpipe1 - wanpipe1.
[    5.110606] WANPIPE: TDM Codecs Initialized
[    5.138361] WANPIPE(tm) Socket API Module 3.5.24.0 (c) 1994-2010 Sangoma Technologies Inc
[    5.138368] NET: Registered protocol family 25
[    5.171801] WANPIPE(tm) WANEC Layer 3.5.24.0 (c) 1995-2006 Sangoma Technologies Inc.
[    5.171807] wanec_create_dev: Registering Wanpipe ECDEV Device!
[    5.211707] wanpipe1: Starting WAN Setup
[    5.211713] 
[    5.211715] Processing WAN device wanpipe1...
[    5.211719] wanpipe1: Locating: A200/A400/B600/B700/B800 card, CPU A, PciBus=4, PciSlot=3
[    5.211728] wanpipe1: Found: A200/A400/B600/B700/B800 card, CPU A, PciBus=4, PciSlot=3, Port=0
[    5.211785] wanpipe1: AFT PCI memory at 0xDFDF0000
[    5.211788] wanpipe1: IRQ 17 allocated to the AFT PCI card
[    5.211841] wanpipe1: Starting AFT Analog Hardware Init.
[    5.211874] wanpipe1: Enabling front end link monitor
[    5.211879] wanpipe1: Global Chip Configuration: used=1 used_type=1
[    5.211906] wanpipe1: Global Front End Configuration!
[    5.211909] wanpipe1: Configuring FXS/FXO Front End ...
[    5.424637] wanpipe1: Module 1: Installed -- Auto FXO (AUSTRALIA mode)!
[    5.624587] wanpipe1: Module 2: Installed -- Auto FXO (AUSTRALIA mode)!
[    5.824637] wanpipe1: Module 3: Installed -- Auto FXO (AUSTRALIA mode)!
[    6.025333] wanpipe1: Module 4: Installed -- Auto FXO (AUSTRALIA mode)!
[    6.225169] wanpipe1: Module 5: Installed -- Auto FXO (AUSTRALIA mode)!
[    6.425906] wanpipe1: Module 6: Installed -- Auto FXO (AUSTRALIA mode)!
[    6.624559] wanpipe1: Module 7: Installed -- Auto FXO (AUSTRALIA mode)!
[    6.824553] wanpipe1: Module 8: Installed -- Auto FXO (AUSTRALIA mode)!
[    6.824560] wanpipe1: Running post initialization...
[    6.824563] wanpipe1: Remora config done!
[    6.824567] wanpipe1: AFT Data Mux Bit Map: 0x01234567
[    6.824794] wanpipe1: Front End Interface Ready 0x00000000
[    6.824805] wanpipe1: Register EC interface wanec1 (usage 1, max ec chans 32)!
[    6.824811] wanpipe1: Configuring Device   :wanpipe1  FrmVr=07
[    6.824814] wanpipe1:    Global MTU     = 1500
[    6.824817] wanpipe1:    Global MRU     = 1500
[    6.824819] wanpipe1:    Data Mux Map   = 0x01234567
[    6.824821] wanpipe1:    Rx CRC Bytes   = 0
[    6.824824] wanpipe1:    Memory: Card=73888 Wandev=2088 Card Union=13464
[    6.824827] wanpipe1:    Global TDM Int = Disabled
[    6.824829] wanpipe1:    Global TDM Ring= Disabled
[    6.824831] wanpipe1:    Global SPAN IRQ= RX/TX
[    6.824834] wanpipe1:    TDM HW TONE    = Enabled
[    6.824836] wanpipe1:    TDMV Span      = 1 : Enabled
[    6.824838] wanpipe1:    TDMV Dummy     = Disabled
[    6.824842] wanpipe1:    RTP TAP        = Disabled
[    6.825055] wanpipe1:    Global Poll IRQ= Disabled
[    6.825059] wanpipe1: Configuring Interface: w1g1
[    6.825070] wanpipe1:w1g1: Running in TDM Voice Zaptel Mode.
[    6.825076] wanpipe1: Registering TDMV FXO iface to module 1!
[    6.825080] wanpipe1:    MRU           :8 (Chunk/Period=8/1)
[    6.825082] wanpipe1:    MTU           :8 (Chunk/Period=8/1)
[    6.825084] wanpipe1:    HDLC Eng      :Off (Transparent) | N/A
[    6.825090] wanpipe1:    Data Mux Ctrl :On
[    6.825093] wanpipe1:    Active Ch Map :0x00000001
[    6.825095] wanpipe1:    First TSlot   :0
[    6.825105] wanpipe1:    DMA/Len/Idle/ChainR/ChainT/EC :65/1024/8/Off/Off/On
[    6.825109] wanpipe1:    Memory: Chan=5688
[    6.825165] 
[    6.825167] wanpipe1: Configuring Interface: w1g1 (log supress)
[    6.825177] wanpipe1: Registering TDMV FXO iface to module 2!
[    6.825180] wanpipe1:    Active Ch Map :0x00000002
[    6.825183] wanpipe1:    First TSlot   :1
[    6.825237] 
[    6.825239] wanpipe1: Configuring Interface: w1g1 (log supress)
[    6.825247] wanpipe1: Registering TDMV FXO iface to module 3!
[    6.825250] wanpipe1:    Active Ch Map :0x00000004
[    6.825252] wanpipe1:    First TSlot   :2
[    6.825308] 
[    6.825311] wanpipe1: Configuring Interface: w1g1 (log supress)
[    6.825320] wanpipe1: Registering TDMV FXO iface to module 4!
[    6.825324] wanpipe1:    Active Ch Map :0x00000008
[    6.825326] wanpipe1:    First TSlot   :3
[    6.825382] 
[    6.825384] wanpipe1: Configuring Interface: w1g1 (log supress)
[    6.825393] wanpipe1: Registering TDMV FXO iface to module 5!
[    6.825399] wanpipe1:    Active Ch Map :0x00000010
[    6.825401] wanpipe1:    First TSlot   :4
[    6.825459] 
[    6.825461] wanpipe1: Configuring Interface: w1g1 (log supress)
[    6.825470] wanpipe1: Registering TDMV FXO iface to module 6!
[    6.825473] wanpipe1:    Active Ch Map :0x00000020
[    6.825476] wanpipe1:    First TSlot   :5
[    6.825533] 
[    6.825535] wanpipe1: Configuring Interface: w1g1 (log supress)
[    6.825546] wanpipe1: Registering TDMV FXO iface to module 7!
[    6.825553] wanpipe1:    Active Ch Map :0x00000040
[    6.825555] wanpipe1:    First TSlot   :6
[    6.825611] 
[    6.825613] wanpipe1: Configuring Interface: w1g1 (log supress)
[    6.825621] wanpipe1: Configuring TDMV Master dev w1g1
[    6.825624] wanpipe1: Registering TDMV FXO iface to module 8!
[    6.825627] wanpipe1:    Active Ch Map :0x00000080
[    6.825629] wanpipe1:    First TSlot   :7
[    6.825693] 
[    6.825697] wanpipe1: ALAW override parameter detected. Device will be operating in ALAW
[    6.825703] wanpipe1: Not used module 9!
[    6.825705] wanpipe1: Not used module 10!
[    6.825708] wanpipe1: Not used module 11!
[    6.825710] wanpipe1: Not used module 12!
[    6.825712] wanpipe1: Not used module 13!
[    6.825714] wanpipe1: Not used module 14!
[    6.825717] wanpipe1: Not used module 15!
[    6.825719] wanpipe1: Not used module 16!
[    6.825721] wanpipe1: Not used module 17!
[    6.825723] wanpipe1: Not used module 18!
[    6.825726] wanpipe1: Not used module 19!
[    6.825728] wanpipe1: Not used module 20!
[    6.825730] wanpipe1: Not used module 21!
[    6.825732] wanpipe1: Not used module 22!
[    6.825735] wanpipe1: Not used module 23!
[    6.825737] wanpipe1: Not used module 24!
[    6.826726] wanpipe1: Wanpipe device is registered to Zaptel span # 1!
[    6.826730] wanpipe1: Enable HW Tone detection!
[    6.827433] wanpipe1: AFT communications enabled!
[    6.827438] wanpipe1: AFT Per Port TDM Intr (swring)
[    6.847962] wanpipe1: Clear Echo Canceller chip reset.
[   11.603798] wanpipe1: Module 2: FXO Line is disconnected!
[   11.604802] wanpipe1: Module 3: FXO Line is disconnected!
[   11.605797] wanpipe1: Module 4: FXO Line is disconnected!
[   11.606797] wanpipe1: Module 5: FXO Line is disconnected!
[   11.607792] wanpipe1: Module 6: FXO Line is disconnected!
[   11.608800] wanpipe1: Module 7: FXO Line is disconnected!
[   11.609797] wanpipe1: Module 8: FXO Line is disconnected!
[   11.626795] wanpipe1: Module 1: FXO Line is disconnected!
[   11.711529] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ]
[   11.713900] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ]
[   11.716182] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ]
[   11.718464] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ]
[   11.720746] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ]
[   11.723929] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ]
[   11.727950] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ]
[   11.731102] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ]
[   11.902954] dahdi_transcode: Loaded.
[   12.041997] wanpipe1: Open (usecount=1, channo=1, chanpos=1)...
[   12.057832] wanpipe1: Open (usecount=1, channo=1, chanpos=1)...
[   12.057854] wanpipe1: Open (usecount=1, channo=2, chanpos=2)...
[   12.077575] wanpipe1: Open (usecount=1, channo=1, chanpos=1)...
[   12.077598] wanpipe1: Open (usecount=1, channo=2, chanpos=2)...
[   12.077612] wanpipe1: Open (usecount=1, channo=3, chanpos=3)...
[   12.096928] wanpipe1: Open (usecount=1, channo=1, chanpos=1)...
[   12.096950] wanpipe1: Open (usecount=1, channo=2, chanpos=2)...
[   12.096965] wanpipe1: Open (usecount=1, channo=3, chanpos=3)...
[   12.096978] wanpipe1: Open (usecount=1, channo=4, chanpos=4)...
[   12.116871] wanpipe1: Open (usecount=1, channo=1, chanpos=1)...
[   12.116893] wanpipe1: Open (usecount=1, channo=2, chanpos=2)...
[   12.116908] wanpipe1: Open (usecount=1, channo=3, chanpos=3)...
[   12.116922] wanpipe1: Open (usecount=1, channo=4, chanpos=4)...
[   12.116936] wanpipe1: Open (usecount=1, channo=5, chanpos=5)...
[   12.135829] wanpipe1: Open (usecount=1, channo=1, chanpos=1)...
[   12.135851] wanpipe1: Open (usecount=1, channo=2, chanpos=2)...
[   12.135866] wanpipe1: Open (usecount=1, channo=3, chanpos=3)...
[   12.135880] wanpipe1: Open (usecount=1, channo=4, chanpos=4)...
[   12.135894] wanpipe1: Open (usecount=1, channo=5, chanpos=5)...
[   12.135907] wanpipe1: Open (usecount=1, channo=6, chanpos=6)...
[   12.152571] wanpipe1: Open (usecount=1, channo=1, chanpos=1)...
[   12.152594] wanpipe1: Open (usecount=1, channo=2, chanpos=2)...
[   12.152609] wanpipe1: Open (usecount=1, channo=3, chanpos=3)...
[   12.152624] wanpipe1: Open (usecount=1, channo=4, chanpos=4)...
[   12.152638] wanpipe1: Open (usecount=1, channo=5, chanpos=5)...
[   12.152651] wanpipe1: Open (usecount=1, channo=6, chanpos=6)...
[   12.152665] wanpipe1: Open (usecount=1, channo=7, chanpos=7)...
[   12.172565] wanpipe1: Open (usecount=1, channo=1, chanpos=1)...
[   12.172587] wanpipe1: Open (usecount=1, channo=2, chanpos=2)...
[   12.172602] wanpipe1: Open (usecount=1, channo=3, chanpos=3)...
[   12.172617] wanpipe1: Open (usecount=1, channo=4, chanpos=4)...
[   12.172631] wanpipe1: Open (usecount=1, channo=5, chanpos=5)...
[   12.172645] wanpipe1: Open (usecount=1, channo=6, chanpos=6)...
[   12.172659] wanpipe1: Open (usecount=1, channo=7, chanpos=7)...
[   12.172673] wanpipe1: Open (usecount=1, channo=8, chanpos=8)...
[   12.585008] dahdi_echocan_mg2: Registered echo canceler 'MG2'
[   12.587225] wanpipe1: Open (usecount=1, channo=1, chanpos=1)...
[   12.587246] wanpipe1: Open (usecount=1, channo=2, chanpos=2)...
[   12.587260] wanpipe1: Open (usecount=1, channo=3, chanpos=3)...
[   12.587275] wanpipe1: Open (usecount=1, channo=4, chanpos=4)...
[   12.587289] wanpipe1: Open (usecount=1, channo=5, chanpos=5)...
[   12.587303] wanpipe1: Open (usecount=1, channo=6, chanpos=6)...
[   12.587317] wanpipe1: Open (usecount=1, channo=7, chanpos=7)...
[   12.587331] wanpipe1: Open (usecount=1, channo=8, chanpos=8)...
[   13.419761] asterisk[1352] trap invalid opcode ip:5316f3 sp:7fff2db1a0f0 error:0 in asterisk[400000+1d6000]
[   14.344275] br0: no IPv6 routers present
[   18.848045] br0: port 1(eth0) entering forwarding state