[asterisk-users] ISDN E1, after electrical disconnected is not becoming UP, IRQ misses: 1

[bilal ghayyad]

Dear All;

I am afraid from IRQ misses: 1

The ISDN E1 was working fine on the machine, the electrical disconnected and then the Red Allarm. I checked the dahdi and I found that I have to reinstall dahdi again and I did. But still not becoming UP.

The output of the cat /proc/dahdi/1 is following (I am afraid from the IRQ misses: 1, so if it is a problem what is the solution)?

[root at CC asterisk]# cat /proc/dahdi/1
Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4 RED
        IRQ misses: 1

           1 TE2/0/1/1 Clear (In use) RED(SWEC: MG2)
           2 TE2/0/1/2 Clear (In use) RED(SWEC: MG2)
           3 TE2/0/1/3 Clear (In use) RED(SWEC: MG2)
           4 TE2/0/1/4 Clear (In use) RED(SWEC: MG2)
           5 TE2/0/1/5 Clear (In use) RED(SWEC: MG2)
           6 TE2/0/1/6 Clear (In use) RED(SWEC: MG2)
           7 TE2/0/1/7 Clear (In use) RED(SWEC: MG2)
           8 TE2/0/1/8 Clear (In use) RED(SWEC: MG2)
           9 TE2/0/1/9 Clear (In use) RED(SWEC: MG2)
          10 TE2/0/1/10 Clear (In use) RED(SWEC: MG2)
          11 TE2/0/1/11 Clear (In use) RED(SWEC: MG2)
          12 TE2/0/1/12 Clear (In use) RED(SWEC: MG2)
          13 TE2/0/1/13 Clear (In use) RED(SWEC: MG2)
          14 TE2/0/1/14 Clear (In use) RED(SWEC: MG2)
          15 TE2/0/1/15 Clear (In use) RED(SWEC: MG2)
          16 TE2/0/1/16 HDLCFCS (In use) RED
          17 TE2/0/1/17 Clear (In use) RED(SWEC: MG2)
          18 TE2/0/1/18 Clear (In use) RED(SWEC: MG2)
          19 TE2/0/1/19 Clear (In use) RED(SWEC: MG2)
          20 TE2/0/1/20 Clear (In use) RED(SWEC: MG2)
          21 TE2/0/1/21 Clear (In use) RED(SWEC: MG2)
          22 TE2/0/1/22 Clear (In use) RED(SWEC: MG2)
          23 TE2/0/1/23 Clear (In use) RED(SWEC: MG2)
          24 TE2/0/1/24 Clear (In use) RED(SWEC: MG2)
          25 TE2/0/1/25 Clear (In use) RED(SWEC: MG2)
          26 TE2/0/1/26 Clear (In use) RED(SWEC: MG2)
          27 TE2/0/1/27 Clear (In use) RED(SWEC: MG2)
          28 TE2/0/1/28 Clear (In use) RED(SWEC: MG2)
          29 TE2/0/1/29 Clear (In use) RED(SWEC: MG2)
          30 TE2/0/1/30 Clear (In use) RED(SWEC: MG2)
          31 TE2/0/1/31 Clear (In use) RED(SWEC: MG2)

Regards
Bilal