[asterisk-users] Question on system command 1.4.43

[Jim DeVito]

Does the user Asterisk is running as have access to this device?

Thanks!!



----- Original message -----
> I have a USB to serial converter attached to my box.   pl2303: Prolific 
> PL2303 USB to serial adaptor driver
> if I login to the box and send/receive serial commands over this unit it 
> works without error EVERY time.
> 
> however, if I run the same command set from with-in the extensions.conf 
> with System()
> I get errors in dmesg like "pl2303 ttyUSB0: pl2303_open - failed 
> submitting read urb, error -22"
> and then obviusly my command does not work.
> 
> however, again - If I go back to the command line and my command it runs 
> just fine.
> 
> Any ideas on what might be happening here?
> 
> Jerry
> 
> extensions.conf
> exten => s,1,ChanIsAvail(Console/Dsp)
> exten => s,n,GotoIf($["${AVAILCHAN}" = ""]?smvoice-busy,s,1)
> exten => s,n,System(/home/silentm/bin/usbserial -start)
> exten => s,n,Playback(beep)
> exten => s,n,Dial(Console/dsp)
> exten => s,n,Hangup
> exten => h,1,System(/home/silentm/bin/usbserial -stop)
> 
> 
> 
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                               http://www.asterisk.org/hello
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>       http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120103/98356077/attachment.htm>