[asterisk-users] Asterisk vs FreeSwitch vs Asterisk + OpenSIP

[Brynjolfur Thorvardsson]

Hi Leandro, that's a really good suggestion. Thanks a lot, I'll certainly give it a try.

-----Oprindelig meddelelse-----
Fra: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] På vegne af Leandro Dardini
Sendt: 10. februar 2012 14:03
Til: Asterisk Users Mailing List - Non-Commercial Discussion
Emne: Re: [asterisk-users] Asterisk vs FreeSwitch vs Asterisk + OpenSIP

2012/2/10 Brynjolfur Thorvardsson <binni at itanet.nu>:
> I hope I'm not flogging a dead horse here, but the discussion around the whole scalability issue in Asterisk have opened my eyes to a whole lot of issues, making me increasingly confused!
>
> We have a fully functioning and stable installation where we offer PBX services to some 15 small firms (basically medical practices). These are based all over the country, with between 2 and 15 SIP phones each. We have a Web front end where each firm can configure their own queues, menus, forwarding etc.
>
> My problem is that my bosses want to expand massively, they are currently talking of at least a tenfold increase in the number of clients. I'm fairly certain our Asterisk server won't be able to handle that. Our current 15 clients all have peak usage at the same time (with 2/3 of all traffic between 8 and 9 in the morning). At peak times, we have 20% CPU load with some 100 concurrent calls and a little under one call/second.
>
> I have to solve the scalability problem within a relatively short timeframe so starting from scratch with something new is out of the question.
>
> My first thought was to add another Asterisk server and use DUNDi load balancing between the two. But looking around and reading the discussion on this list got me to thinking whether some sort of SIP switch or router/proxy could take some load off the Asterisk server(s).
>
> One of my main concerns is to change our current setup as little as possible. It's a mishmash of Asterisk, MySQL, Rails and RAGI/RAMI. The original programmers are no longer available to me and I am still very wet behind the ears when it comes to VOIP.
>
> So should I be looking at adding e.g. OpenSIP as a sip proxy to our current setup or adding a second (and then a third and a fourth ...) Asterisk server with DUNDi? Or both? Will adding OpenSIP require a change in the way in which we handle SIP peers or require some major reconfiguration of Asterisk? It seems to me that DUNDi requires minimal configuration changes but I don't really know.
>
> Any information and recommendations will be greatly appreciated!
>
> Regards
>
> Binni
>

There are a lots of solutions to asterisk scalability. Each one with its own pros and cons. If you have several small firms, the easiest path will be to duplicate your installation and share your clients among all the servers. Firm01 to Firm15 will be on server01, Firm16 to
Firm25 on server02 and so on...
However if you have such big numbers of contemporary calls (the max I recorded on one of my server was 60 active calls), maybe you need to think better to high availability, duplicating each server and putting them in high availability.
One other way, the one I prefer is to completely share the load among a bunch of servers using mysql multimaster replication and asterisk realtime. Client's phones will use SRV to locate the "best" server.
This way, you can just increase the capacity adding servers and you are completely fault tolerant.

Leandro

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users