[asterisk-users] Stuck DAHDI Lines

[Bryant Zimmerman]

If you do a "core show channel conicse" and use the id from the LOCAL side 
of the call that is stuck that should shut down the channel without 
clearing all your DAHDI channels that are up. Does it only happen when you 
are calling throught a LOCAL context?

Thanks

Bryant 

----------------------------------------
 From: "Antonio Modesto" <modesto at isimples.com.br>
Sent: Thursday, February 09, 2012 8:58 AM
To: "Lista Asterisk" <asterisk-users at lists.digium.com>
Subject: [asterisk-users] Stuck DAHDI Lines

 Hi,

    Sometimes some of my dahdi channels become stuck, It is very strange, 
here is the output of the "core show channels" command:

pabx*CLI> core show channels 
Channel              Location             State   Application(Data)         
    
Local/104 at ramais-cc0 104 at ramais:1         Up      Transferred 
Call(DAHDI/13-1)  
Local/104 at ramais-cc0 ~~s~~@dial_dahdi:15  Up      Dial(DAHDI/10/ 
91208788,120,"T
DAHDI/10-1           (None)               Up      AppDial((Outgoing Line))  
    
DAHDI/13-1           s at from_celular:1     Up      Transferred 
Call(Local/104 at ram

When I issue a "hangup request DAHDI/10-1 in this case, All the other 
channels are cleaned, I don't know what can be causing it.

Regards.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120209/9a192d84/attachment.htm>