[asterisk-users] TE410P (1st) without cables always green

[Marcio Gomes]

Hello Shaun,

I take this approach :

- zaptel 1.2.XX , 1.4.XX  I can see interrupts working  , I made some 
patches to compile in 2.6.32 kernel tree.

- dahdi 2.0.0 to dahdi-2.2.0, I can see interrupts working, I made some 
patches to compile in 2.6.32 kernel tree

- This "itop" from 2.2.0 tree :

                                                                 IRQs/Second
               Device (IRQ)             CPU0            CPU1           TOTAL
                 rtc0 (  8):               0               0               0
                i8042 (  1):               0               0               0
                 eth0 ( 28):               3               3               6
                timer (  0):             435             566            1001
   ata_piix, ata_piix ( 19):               2               1               3
         pata_jmicron ( 16):               0               0               0
              cascade (  2):               0               0               0
              wct4xxp ( 20):             566             435            1001

As you can see, I am having 1K int/s


- My patches are related to add #include <linux/sched.c> in dahdi-base.c 
, wct4xxp.c and wctdm.c , and comment out the lines relative to others 
drivers ( I only needs wcfxo, wctdm and wct4xxp
to this box )

- 2.2.1 and greater -> Compiles without patches, but not working, int/s = 0

I do not knows the main changes from 2.2.0 to to 2.2.1 dahdi-tree , but 
it is clear to me that problems are in this changes. I can goes up and 
down between versions
with same issues, I do this because initially suspected  from da dead 
lock in hardware create for some tests I have do.


Regards,

Marcio Gomes


Em 07/02/2012 17:38, Marcio Gomes escreveu:
> News from Zaptel..
>
> I patch the last zaptel.1.2.27 to compiles in 2.6.33 kernels 
> series.... Surprise !!!!!!
>
>  20:      68011      71871   IO-APIC-fasteoi   wct4xxp
>
> in zttool the spans are RED, all is working with pre 1.4 zaptel and 
> dahdi.
>
> The problems are in changes between zaptel.1.2.X and zaptel.1.4.X.
>
> I thinking now that is an old issue added from 1.2 to 1.4 branches and 
> sucessivily to dahdi branches,
> and I lost something in past.
>
> But I want go to asterisk 1.8 and greater with new drivers , Can 
> anyone help me in this ?
>
> regards,
>
>
>
>
> Em 07/02/2012 17:05, Marcio Gomes escreveu:
>> Hello All,
>>
>>
>>> I really not understand de APIC changes in IO-APIC-XXXX  and the 
>>> greater 100 Interrupt numbers in old setups.. can you help me ?
>>
>>
>> I forget to say,
>>
>> In production BOX, I "only" do a linux -R newconfig && reboot ,
>>
>> slots , hardware, setup, etc.. is the same.. no changes. It's give me 
>> a confirmation about it is not a hardware issue, the only changes
>> are in software.
>>
>> In the development box, a hardware problem iss possible, I will make 
>> a copy of the working software and put in it to clarify this
>> doubt.
>>
>> Regards,
>>
>> Marcio Gomes
>>
>>
>>
>> -- 
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>               http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> -- 
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users