[asterisk-users] $100 Bounty: Level3/Asterisk/Adtran T.38 Pass-through

Eric Wieling EWieling at nyigc.com
Thu Dec 27 13:25:06 CST 2012


We are using t38pt_udptl=yes,redundancy,maxdatagram=400   Without the maxdatagram we get errors in the CLI.  We also tried using FEC instead of redundancy, but no difference.

-----Original Message-----
From: Christopher Harrington [mailto:chris at acsdi.com] 
Sent: Thursday, December 27, 2012 2:23 PM
To: Eric Wieling
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] $100 Bounty: Level3/Asterisk/Adtran T.38 Pass-through

Last thing to check, just for sanity's sake:

t38pt_udptl=yes in sip.conf? It defaults to off.




On Thu, Dec 27, 2012 at 12:32 PM, Eric Wieling <EWieling at nyigc.com> wrote:


	It does not appear to make any difference.  Calls are still failing.
	

	-----Original Message-----
	From: Christopher Harrington [mailto:chris at acsdi.com]
	Sent: Thursday, December 27, 2012 1:20 PM
	To: Eric Wieling
	Cc: Asterisk Users Mailing List - Non-Commercial Discussion
	Subject: Re: [asterisk-users] $100 Bounty: Level3/Asterisk/Adtran T.38 Pass-through
	
	True, but it should bypass Asterisk when possible for SIP streams and may solve your problem.
	
	
	On Thu, Dec 27, 2012 at 12:16 PM, Eric Wieling <EWieling at nyigc.com> wrote:
	
	
	        We have directrtpsetup=no because the comments in the sample config indicates it does not work in all situations.
	
	
	        -----Original Message-----
	        From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Christopher Harrington
	        Sent: Thursday, December 27, 2012 1:13 PM
	        To: Asterisk Users Mailing List - Non-Commercial Discussion
	        Subject: Re: [asterisk-users] $100 Bounty: Level3/Asterisk/Adtran T.38 Pass-through
	
	        directrtpsetup=yes in sip.conf?
	
	
	
	        On Thu, Dec 27, 2012 at 12:09 PM, Eric Wieling <EWieling at nyigc.com> wrote:
	
	
	                We have set directmedia=yes as well as directmedia=no.  There is no NAT involved.
	
	
	
	
	                -----Original Message-----
	                From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Leandro Dardini
	                Sent: Thursday, December 27, 2012 1:08 PM
	                To: Asterisk Users Mailing List - Non-Commercial Discussion
	                Subject: Re: [asterisk-users] $100 Bounty: Level3/Asterisk/Adtran T.38 Pass-through
	
	                Have you configured the canreinvite=yes in sip peer?
	
	                I am currently off work for two days, but a 100% fail means a configuration problem for sure.
	
	
	                Leandro
	
	
	                2012/12/27 Eric Wieling <EWieling at nyigc.com>
	
	
	                        We are offering $100 (paid via paypal or check) to the first person who assists us in successfully sending and receiving faxes in the setup described below.  Offer expires Dec 31.  We are a direct customer of Level 3, there is no other carrier involved.
	
	                        What we want to work:
	
	                            Level 3 T.38 TN <-> MSX/Nextone SBC <-> Asterisk 1.8.18.1 <-> Adtran NetVanta w/POTS and T.38 support.
	
	                        When we replace Asterisk with Kamailio faxes work fine.  When we put Asterisk there instead, then faxes fail nearly 100% of the time.
	
	                        I see the switch to T.38 in the Adtran debug logs.   We can originate and terminate T.38 calls in Asterisk using SendFax/ReceiveFax using T.38 so I'm assuming I have my udptl.conf and sip.conf settings correct.
	
	
	
	                        --
	                        _____________________________________________________________________
	                        -- Bandwidth and Colocation Provided by http://www.api-digital.com --
	                        New to Asterisk? Join us for a live introductory webinar every Thurs:
	                                       http://www.asterisk.org/hello
	
	                        asterisk-users mailing list
	                        To UNSUBSCRIBE or update options visit:
	                           http://lists.digium.com/mailman/listinfo/asterisk-users
	
	
	
	
	                --
	                _____________________________________________________________________
	                -- Bandwidth and Colocation Provided by http://www.api-digital.com --
	                New to Asterisk? Join us for a live introductory webinar every Thurs:
	                               http://www.asterisk.org/hello
	
	                asterisk-users mailing list
	                To UNSUBSCRIBE or update options visit:
	                   http://lists.digium.com/mailman/listinfo/asterisk-users
	
	
	
	
	
	        --
	        -Chris Harrington
	
	        ACSDi Office: 763.559.5800
	        Mobile Phone: 612.326.4248
	
	
	
	
	
	
	--
	-Chris Harrington
	
	ACSDi Office: 763.559.5800
	Mobile Phone: 612.326.4248
	
	




-- 
-Chris Harrington

ACSDi Office: 763.559.5800
Mobile Phone: 612.326.4248



More information about the asterisk-users mailing list