[asterisk-users] PRI can receive calls but cannot dial out
Vieri
rentorbuy at yahoo.com
Sat Dec 8 09:23:18 CST 2012
--- On Fri, 12/7/12, Alex Kauffmann <akauffma at prodigy.net.mx> wrote:
> From: Alex Kauffmann <akauffma at prodigy.net.mx>
> Subject: Re: [asterisk-users] PRI can receive calls but cannot dial out
> To: asterisk-users at lists.digium.com
> Date: Friday, December 7, 2012, 11:37 AM
> On 12/7/2012 6:23 AM, Vieri wrote:
> >
> >
> >> Am 05.12.2012 08:48, schrieb Vieri:
> >>> Hi,
> >>>
> >>> I'm trying to call out from a SIP extension to
> an
> >> outbound destination via a PRI E1 (Digium B410P).
> >>>
> >>> Please take a look at the PRI debug below.
> >>>
> >>> --------
> >>>
> >>> # cat /etc/dahdi/system.conf
> >>>
> >>> # Digium Wildcard TDM400P REV I (WCTDM/4)
> >>> fxsks=1
> >>> echocanceller=oslec,1
> >>> fxsks=2
> >>> echocanceller=oslec,2
> >>> fxsks=3
> >>> echocanceller=oslec,3
> >>> fxsks=4
> >>> echocanceller=oslec,4
> >>>
> >>> # Digium Wildcard TDM2400P (WCTDM/0)
> >>> fxsks=5
> >>> echocanceller=oslec,5
> >>> fxsks=6
> >>> echocanceller=oslec,6
> >>> fxsks=7
> >>> echocanceller=oslec,7
> >>> fxsks=8
> >>> echocanceller=oslec,8
> >>> fxsks=9
> >>> echocanceller=oslec,9
> >>> fxsks=10
> >>> echocanceller=oslec,10
> >>> fxsks=11
> >>> echocanceller=oslec,11
> >>> fxsks=12
> >>> echocanceller=oslec,12
> >>>
> >>> # Digium Wildcard B410P (B4/0/1)
> >>> span=3,1,0,CCS,AMI
> >>> bchan=29-30
> >>> hardhdlc=31
> >>> echocanceller=oslec,29-30
> >>>
> >>> # Digium Wildcard B410P (B4/0/2)
> >>> span=4,2,0,CCS,AMI
> >>> bchan=32-33
> >>> hardhdlc=34
> >>> echocanceller=oslec,32-33
> >>>
> >>> # Digium Wildcard B410P (B4/0/3)
> >>> span=5,3,0,CCS,AMI
> >>> bchan=35-36
> >>> hardhdlc=37
> >>> echocanceller=oslec,35-36
> >>>
> >>> # Digium Wildcard B410P (B4/0/4)
> >>> span=6,4,0,CCS,AMI
> >>> bchan=38-39
> >>> hardhdlc=40
> >>> echocanceller=oslec,38-39
> >>>
> >>> --------
> >>>
> >>> # lsmod | grep wcb4xxp
> >>> wcb4xxp
> >> 66250 12
> >>> dahdi
> >> 169899 65
> >>
> dahdi_echocan_oslec,wcb4xxp,wctdm24xxp,dahdi_voicebus,wctdm
> >>>
> >>> --------
> >>>
> >>> # cat chan_dahdi.conf
> >>>
> >>> [trunkgroups]
> >>>
> >>> [channels]
> >>> transfer = yes
> >>> usecallerid = yes
> >>> cidsignalling = dtmf
> >>> callwaiting = yes
> >>> usecallingpres = yes
> >>> callwaitingcallerid = yes
> >>> threewaycalling = yes
> >>> canpark = yes
> >>> cancallforward = yes
> >>> callreturn = yes
> >>> callprogress = no
> >>> overlapdial = yes
> >>> echocancel = yes
> >>> facilityenable = yes
> >>> immediate = no
> >>> busydetect = no
> >>>
> >>> ; Digium Wildcard TDM400P REV I (WCTDM/4)
> >>> signalling = fxs_ks
> >>> txgain = 1.0
> >>> rxgain = 14.0
> >>> group = 3
> >>> context = incoming-dahdi-3
> >>> faxdetect = incoming
> >>> channel => 1,2,3,4
> >>>
> >>> ; Digium Wildcard TDM2400P (WCTDM/0)
> >>> group = 4
> >>> context = incoming-dahdi-4
> >>> faxdetect = incoming
> >>> channel => 5,6,7,8,9,10,11,12
> >>>
> >>> ; Digium Wildcard B410P (B4/0/1)
> >>> signalling = bri_cpe
> >>> switchtype = euroisdn
> >>> rxgain = 2.0
> >>> group = 2
> >>> context = incoming-dahdi-2
> >>> faxdetect = incoming
> >>> channel => 29-30
> >>>
> >>> ; Digium Wildcard B410P (B4/0/2)
> >>> channel => 32-33
> >>>
> >>> ; Digium Wildcard B410P (B4/0/3)
> >>> channel => 35-36
> >>>
> >>> ; Digium Wildcard B410P (B4/0/4)
> >>> channel => 38-39
> >>>
> >>> -----------
> >>>
> >>> # asterisk -rx "dahdi show status"
> >>> Description
> >>
> >> Alarms IRQ bpviol
> CRC
> >> Fra Codi Options LBO
> >>> Wildcard TDM400P REV I Board 5
> >> OK
> 0
> >> 0 0
> >> CAS Unk
> 0 db
> >> (CSU)/0-133 feet (DSX-1)
> >>> Wildcard TDM2400P
> >>
> OK
> >> 0 0
> >> 0 CAS Unk
> >> 0 db (CSU)/0-133 feet
> (DSX-1)
> >>> B4XXP (PCI) Card 0 Span 1
> >> RED
> >> 0 0
> >> 0 CCS AMI
> >> 0 db (CSU)/0-133
> feet (DSX-1)
> >>> B4XXP (PCI) Card 0 Span 2
> >> OK
> 0
> >> 0 0
> >> CCS AMI
> 0 db
> >> (CSU)/0-133 feet (DSX-1)
> >>> B4XXP (PCI) Card 0 Span 3
> >> OK
> 0
> >> 0 0
> >> CCS AMI
> 0 db
> >> (CSU)/0-133 feet (DSX-1)
> >>> B4XXP (PCI) Card 0 Span 4
> >> OK
> 0
> >> 0 0
> >> CCS AMI
> 0 db
> >> (CSU)/0-133 feet (DSX-1)
> >>>
> >>> Note that I have 3 cables connected and 1 port
> is free
> >> (RED).
> >>>
> >>> -----------
> >>>
> >>> in AEL dialplan, I run:
> >>>
> >>> Dial(DAHDI/g2/XXXXXXXXXX);
> >>>
> >>> in the *CLI I see the following:
> >>>
> >>> -- Requested
> transfer capability:
> >> 0x00 - SPEECH
> >>> -- Called
> DAHDI/g2/XXXXXXXXXX
> >>> -- Span 4: Channel
> 0/1 got hangup,
> >> cause 18
> >>> -- Hungup
> 'DAHDI/i4/XXXXXXXXXX-7'
> >>> == Everyone is
> busy/congested at this time
> >> (1:0/0/1)
> >>> -- Auto fallthrough,
> channel
> >> 'SIP/4053-00000089' status is 'CHANUNAVAIL'
> >>>
> >>>
> >>> If I enable PRI debug:
> >>>
> >>> -- Executing
> [@company:1]
> >> Dial("SIP/4053-00000001", "DAHDI/g2/XXXXXXXXXX") in
> new
> >> stack
> >>> PRI Span: 4 -- Making new call for cref 32772
> >>> -- Requested
> transfer capability:
> >> 0x00 - SPEECH
> >>> PRI Span: 4
> >>> PRI Span: 4 > DL-DATA request
> >>> PRI Span: 4 > Protocol Discriminator: Q.931
> >> (8) len=32
> >>> PRI Span: 4 > TEI=0 Call Ref: len= 1
> (reference
> >> 4/0x4) (Sent from originator)
> >>> PRI Span: 4 > Message Type: SETUP (5)
> >>> PRI Span: 4 TEI=0 Transmitting N(S)=6, window
> is open
> >> V(A)=6 K=1
> >>> PRI Span: 4
> >>> PRI Span: 4 > Protocol Discriminator: Q.931
> >> (8) len=32
> >>> PRI Span: 4 > TEI=0 Call Ref: len= 1
> (reference
> >> 4/0x4) (Sent from originator)
> >>> PRI Span: 4 > Message Type: SETUP (5)
> >>> PRI Span: 4 > [04 03 80 90 a3]
> >>> PRI Span: 4 > Bearer Capability (len= 5) [
> Ext:
> >> 1 Coding-Std: 0 Info transfer
> capability: Speech
> >> (0)
> >>> PRI Span: 4 >
> >>
> >> Ext: 1 Trans mode/rate:
> 64kbps,
> >> circuit-mode (16)
> >>> PRI Span: 4 >
> >>
> >> User information layer
> 1: A-Law (35)
> >>> PRI Span: 4 > [18 01 81]
> >>> PRI Span: 4 > Channel ID (len= 3) [ Ext: 1
> >> IntID: Implicit BRI Spare: 0
> >> Preferred Dchan: 0
> >>> PRI Span: 4 >
> >>
> >> ChanSel: B1 channel
> >>> PRI Span: 4 >
> >>
> ]
> >>> PRI Span: 4 > [6c 06 21 80 34 30 35 33]
> >>> PRI Span: 4 > Calling Party Number (len= 8)
> [ Ext:
> >> 0 TON: National Number (2) NPI:
> ISDN/Telephony
> >> Numbering Plan (E.164/E.163) (1)
> >>> PRI Span: 4 >
> >>
> >> Presentation:
> Presentation
> >> allowed, User-provided, not screened (0)
> '4053' ]
> >>> PRI Span: 4 > [70 0a 80 36 35 36 36 36 30 34
> 39 39]
> >>> PRI Span: 4 > Called Party Number (len=12) [
> Ext:
> >> 1 TON: Unknown Number Type (0) NPI:
> Unknown
> >> Number Plan (0) 'XXXXXXXXXX' ]
> >>> PRI Span: 4 q931.c:6291 q931_setup: Call 32772
> enters
> >> state 1 (Call Initiated). Hold state: Idle
> >>> -- Called
> DAHDI/g2/XXXXXXXXXX
> >>> PRI Span: 3 TEI=0 Sending SABME
> >>> PRI Span: 3 TEI=0 Sending SABME
> >>> PRI Span: 3 TEI=0 Sending SABME
> >>> PRI Span: 3 TEI=0 MDL-ERROR (G): T200 expired
> N200
> >> times sending SABME in state 5(Awaiting
> establishment)
> >>> PRI Span: 3 Changing from state 5(Awaiting
> >> establishment) to 4(TEI assigned)
> >>> PRI Span: 3 TEI=0 DL event:
> >> Q931_DL_EVENT_DL_RELEASE_IND(3)
> >>> PRI Span: 4 T303 timed out. cref:32772
> >>> PRI Span: 4
> >>> PRI Span: 4 > DL-DATA request
> >>> PRI Span: 4 > Protocol Discriminator: Q.931
> >> (8) len=32
> >>> PRI Span: 4 > TEI=0 Call Ref: len= 1
> (reference
> >> 4/0x4) (Sent from originator)
> >>> PRI Span: 4 > Message Type: SETUP (5)
> >>> PRI Span: 4 TEI=0 Transmitting N(S)=7, window
> is open
> >> V(A)=7 K=1
> >>> PRI Span: 4
> >>> PRI Span: 4 > Protocol Discriminator: Q.931
> >> (8) len=32
> >>> PRI Span: 4 > TEI=0 Call Ref: len= 1
> (reference
> >> 4/0x4) (Sent from originator)
> >>> PRI Span: 4 > Message Type: SETUP (5)
> >>> PRI Span: 4 > [04 03 80 90 a3]
> >>> PRI Span: 4 > Bearer Capability (len= 5) [
> Ext:
> >> 1 Coding-Std: 0 Info transfer
> capability: Speech
> >> (0)
> >>> PRI Span: 4 >
> >>
> >> Ext: 1 Trans mode/rate:
> 64kbps,
> >> circuit-mode (16)
> >>> PRI Span: 4 >
> >>
> >> User information layer
> 1: A-Law (35)
> >>> PRI Span: 4 > [18 01 81]
> >>> PRI Span: 4 > Channel ID (len= 3) [ Ext: 1
> >> IntID: Implicit BRI Spare: 0
> >> Preferred Dchan: 0
> >>> PRI Span: 4 >
> >>
> >> ChanSel: B1 channel
> >>> PRI Span: 4 >
> >>
> ]
> >>> PRI Span: 4 > [6c 06 21 80 34 30 35 33]
> >>> PRI Span: 4 > Calling Party Number (len= 8)
> [ Ext:
> >> 0 TON: National Number (2) NPI:
> ISDN/Telephony
> >> Numbering Plan (E.164/E.163) (1)
> >>> PRI Span: 4 >
> >>
> >> Presentation:
> Presentation
> >> allowed, User-provided, not screened (0)
> '4053' ]
> >>> PRI Span: 4 > [70 0a 80 36 35 36 36 36 30 34
> 39 39]
> >>> PRI Span: 4 > Called Party Number (len=12) [
> Ext:
> >> 1 TON: Unknown Number Type (0) NPI:
> Unknown
> >> Number Plan (0) 'XXXXXXXXXX' ]
> >>> PRI Span: 3 SAPI/TEI=0/0 Kick starting link
> >>> PRI Span: 3 TEI=0 Sending SABME
> >>> PRI Span: 3 Changing from state 4(TEI assigned)
> to
> >> 5(Awaiting establishment)
> >>> PRI Span: 3 TEI=0 Sending SABME
> >>> PRI Span: 3 TEI=0 Sending SABME
> >>> PRI Span: 3 TEI=0 Sending SABME
> >>> PRI Span: 4 T303 timed out. cref:32772
> >>> PRI Span: 4 q931.c:6180 t303_expiry: Call 32772
> enters
> >> state 0 (Null). Hold state: Idle
> >>> PRI Span: 4 Fake clearing. cref:32772
> >>> PRI Span: 4 q931.c:9551 pri_internal_clear:
> alive 1,
> >> hangupack 1
> >>> Span 4: Processing event PRI_EVENT_HANGUP(6)
> >>> -- Span 4: Channel
> 0/1 got hangup,
> >> cause 18
> >>> PRI Span: 4 q931.c:7092 q931_hangup: Hangup
> other
> >> cref:32772
> >>> PRI Span: 4 q931.c:6849 __q931_hangup: ourstate
> Null,
> >> peerstate Null, hold-state Idle
> >>> PRI Span: 4 Destroying call 0xb85cb0a0,
> ourstate Null,
> >> peerstate Null, hold-state Idle
> >>> -- Hungup
> 'DAHDI/i4/XXXXXXXXXX-4'
> >>> == Everyone is
> busy/congested at this time
> >> (1:0/0/1)
> >>> -- Auto fallthrough,
> channel
> >> 'SIP/4053-00000001' status is 'CHANUNAVAIL'
> >>> -- Executing
> [h at company:3]
> >> Hangup("SIP/4053-00000001", "") in new stack
> >>> == Spawn extension
> (company, h, 3) exited
> >> non-zero on 'SIP/4053-00000001'
> >>> PRI Span: 3 TEI=0 MDL-ERROR (G): T200 expired
> N200
> >> times sending SABME in state 5(Awaiting
> establishment)
> >>> PRI Span: 3 Changing from state 5(Awaiting
> >> establishment) to 4(TEI assigned)
> >>> PRI Span: 3 TEI=0 DL event:
> >> Q931_DL_EVENT_DL_RELEASE_IND(3)
> >>> PRI Span: 3 SAPI/TEI=0/0 Kick starting link
> >>> PRI Span: 3 TEI=0 Sending SABME
> >>> PRI Span: 3 Changing from state 4(TEI assigned)
> to
> >> 5(Awaiting establishment)
> >>>
> >>> So the fact that there's a timeout (MDL-ERROR)
> makes me
> >> think that there's some kind of signalling error.
> >>>
> >>> What could it be?
> >>>
> >>> I noticed that my system clock was way off so I
> sync'ed
> >> it via NTP and tried to place a call out. It failed
> again
> >> but this time the log shows a "T303 timed out":
> >>>
> >>> -- Executing
> [@company:1]
> >> Dial("SIP/4053-00000003", "DAHDI/g2/XXXXXXXXXX") in
> new
> >> stack
> >>> PRI Span: 4 -- Making new call for cref 32774
> >>> -- Requested
> transfer capability:
> >> 0x00 - SPEECH
> >>> PRI Span: 4
> >>> PRI Span: 4 > DL-DATA request
> >>> PRI Span: 4 > Protocol Discriminator: Q.931
> >> (8) len=32
> >>> PRI Span: 4 > TEI=0 Call Ref: len= 1
> (reference
> >> 6/0x6) (Sent from originator)
> >>> PRI Span: 4 > Message Type: SETUP (5)
> >>> PRI Span: 4 TEI=0 Transmitting N(S)=10, window
> is open
> >> V(A)=10 K=1
> >>> PRI Span: 4
> >>> PRI Span: 4 > Protocol Discriminator: Q.931
> >> (8) len=32
> >>> PRI Span: 4 > TEI=0 Call Ref: len= 1
> (reference
> >> 6/0x6) (Sent from originator)
> >>> PRI Span: 4 > Message Type: SETUP (5)
> >>> PRI Span: 4 > [04 03 80 90 a3]
> >>> PRI Span: 4 > Bearer Capability (len= 5) [
> Ext:
> >> 1 Coding-Std: 0 Info transfer
> capability: Speech
> >> (0)
> >>> PRI Span: 4 >
> >>
> >> Ext: 1 Trans mode/rate:
> 64kbps,
> >> circuit-mode (16)
> >>> PRI Span: 4 >
> >>
> >> User information layer
> 1: A-Law (35)
> >>> PRI Span: 4 > [18 01 81]
> >>> PRI Span: 4 > Channel ID (len= 3) [ Ext: 1
> >> IntID: Implicit BRI Spare: 0
> >> Preferred Dchan: 0
> >>> PRI Span: 4 >
> >>
> >> ChanSel: B1 channel
> >>> PRI Span: 4 >
> >>
> ]
> >>> PRI Span: 4 > [6c 06 21 80 34 30 35 33]
> >>> PRI Span: 4 > Calling Party Number (len= 8)
> [ Ext:
> >> 0 TON: National Number (2) NPI:
> ISDN/Telephony
> >> Numbering Plan (E.164/E.163) (1)
> >>> PRI Span: 4 >
> >>
> >> Presentation:
> Presentation
> >> allowed, User-provided, not screened (0)
> '4053' ]
> >>> PRI Span: 4 > [70 0a 80 36 35 36 36 36 30 34
> 39 39]
> >>> PRI Span: 4 > Called Party Number (len=12) [
> Ext:
> >> 1 TON: Unknown Number Type (0) NPI:
> Unknown
> >> Number Plan (0) 'XXXXXXXXXX' ]
> >>> PRI Span: 4 q931.c:6291 q931_setup: Call 32774
> enters
> >> state 1 (Call Initiated). Hold state: Idle
> >>> -- Called
> DAHDI/g2/XXXXXXXXXX
> >>> PRI Span: 4 T303 timed out. cref:32774
> >>> PRI Span: 4
> >>> PRI Span: 4 > DL-DATA request
> >>> PRI Span: 4 > Protocol Discriminator: Q.931
> >> (8) len=32
> >>> PRI Span: 4 > TEI=0 Call Ref: len= 1
> (reference
> >> 6/0x6) (Sent from originator)
> >>> PRI Span: 4 > Message Type: SETUP (5)
> >>> PRI Span: 4 TEI=0 Transmitting N(S)=11, window
> is open
> >> V(A)=11 K=1
> >>> PRI Span: 4
> >>> PRI Span: 4 > Protocol Discriminator: Q.931
> >> (8) len=32
> >>> PRI Span: 4 > TEI=0 Call Ref: len= 1
> (reference
> >> 6/0x6) (Sent from originator)
> >>> PRI Span: 4 > Message Type: SETUP (5)
> >>> PRI Span: 4 > [04 03 80 90 a3]
> >>> PRI Span: 4 > Bearer Capability (len= 5) [
> Ext:
> >> 1 Coding-Std: 0 Info transfer
> capability: Speech
> >> (0)
> >>> PRI Span: 4 >
> >>
> >> Ext: 1 Trans mode/rate:
> 64kbps,
> >> circuit-mode (16)
> >>> PRI Span: 4 >
> >>
> >> User information layer
> 1: A-Law (35)
> >>> PRI Span: 4 > [18 01 81]
> >>> PRI Span: 4 > Channel ID (len= 3) [ Ext: 1
> >> IntID: Implicit BRI Spare: 0
> >> Preferred Dchan: 0
> >>> PRI Span: 4 >
> >>
> >> ChanSel: B1 channel
> >>> PRI Span: 4 >
> >>
> ]
> >>> PRI Span: 4 > [6c 06 21 80 34 30 35 33]
> >>> PRI Span: 4 > Calling Party Number (len= 8)
> [ Ext:
> >> 0 TON: National Number (2) NPI:
> ISDN/Telephony
> >> Numbering Plan (E.164/E.163) (1)
> >>> PRI Span: 4 >
> >>
> >> Presentation:
> Presentation
> >> allowed, User-provided, not screened (0)
> '4053' ]
> >>> PRI Span: 4 > [70 0a 80 36 35 36 36 36 30 34
> 39 39]
> >>> PRI Span: 4 > Called Party Number (len=12) [
> Ext:
> >> 1 TON: Unknown Number Type (0) NPI:
> Unknown
> >> Number Plan (0) 'XXXXXXXXXX' ]
> >>> PRI Span: 4 T303 timed out. cref:32774
> >>> PRI Span: 4 q931.c:6180 t303_expiry: Call 32774
> enters
> >> state 0 (Null). Hold state: Idle
> >>> PRI Span: 4 Fake clearing. cref:32774
> >>> PRI Span: 4 q931.c:9551 pri_internal_clear:
> alive 1,
> >> hangupack 1
> >>> Span 4: Processing event PRI_EVENT_HANGUP(6)
> >>> -- Span 4: Channel
> 0/1 got hangup,
> >> cause 18
> >>> PRI Span: 4 q931.c:7092 q931_hangup: Hangup
> other
> >> cref:32774
> >>> PRI Span: 4 q931.c:6849 __q931_hangup: ourstate
> Null,
> >> peerstate Null, hold-state Idle
> >>> PRI Span: 4 Destroying call 0xb85c61d0,
> ourstate Null,
> >> peerstate Null, hold-state Idle
> >>> -- Hungup
> 'DAHDI/i4/XXXXXXXXXX-6'
> >>> == Everyone is
> busy/congested at this time
> >> (1:0/0/1)
> >>> -- Auto fallthrough,
> channel
> >> 'SIP/4053-00000003' status is 'CHANUNAVAIL'
> >>> -- Executing
> [h at company:3]
> >> Hangup("SIP/4053-00000003", "") in new stack
> >>> == Spawn extension
> (company, h, 3) exited
> >> non-zero on 'SIP/4053-00000003'
> >>>
> >>> Note that incoming calls via this PRI work
> correctly.
> >>>
> >>> Asterisk 11.0.1
> >>> latest libpri and dahdi.
> >>>
> >>> Thanks,
> >>>
> >>> Vieri
> >>>
> > --- On Wed, 12/5/12, Thorsten Göllner <tg at ovm-group.com>
> wrote:
> >
> >> From: Thorsten Göllner <tg at ovm-group.com>
> >> Subject: Re: [asterisk-users] PRI can receive calls
> but cannot dial out
> >> To: "Asterisk Users Mailing List - Non-Commercial
> Discussion" <asterisk-users at lists.digium.com>
> >> Cc: "Vieri" <rentorbuy at yahoo.com>
> >> Date: Wednesday, December 5, 2012, 8:21 AM
> >> Hi!
> >>
> >> 1) How long does the outdial take? Does the
> Dial-Command
> >> return immediatly?
> >>
> >> 2) Maybe dial-out is blocked by your carrier? Did
> you try to
> >> open a
> >> trouble ticket there?
> >>
> >> 3) What number do you try to call? Did you try
> some
> >> different number?
> >> Alway the same problem?
> >>
> >> You receive ISDN-Cause-Code 18. Not sure though,
> but I would
> >> open a
> >> troubke ticket at your carrier.
> >>
> >> -Thorsten-
> >
> > Hi,
> >
> > 1) just a few seconds (max. 5)
> > 2) it isn't blocked by the carrier (see below)
> > 3) always the same problem regardless of dialed number
> >
> > I did another test and noticed that if the first port
> of the card is disconnected (no cable) then calls can't go
> out (they can only come in). However, if I connect the first
> port then calls do go out. Why's that?
> > Could there be something wrong with my
> /etc/dahdi/system.conf or chan_dahdi.conf (see above)?
> >
> > Thanks,
> >
> > Vieri
> >
>
> The first port has channels defined in group 2, but the port
> is down.
> Have you tried dialing out with G2 as opposed to g2?
All 4 ports are within group 2.
If port 1 is down (disconnected) and all other 3 are up then:
- dialing g2 fails all the time
- dialing G2 succeeds
I know the difference between G2 and g2 but isn't g2 supposed to "work" even if port 1 is down? Isn't asterisk supposed to skip ports that are down until it finds one that's up?
Vieri
More information about the asterisk-users
mailing list