[asterisk-users] Asterisk Dahdi 1.6.2.23 Iaxmodem

[Tim Nelson]

----- Original Message -----
> Thanks Tim,
> I tried your suggestion below the logs:
> 
>     -- Accepting AUTHENTICATED call from xxx.xx.xx.xx:
>        > requested format = ulaw,
>        > requested prefs = (),
>        > actual format = ulaw,
>        > host prefs = (ulaw),
>        > priority = mine
>     -- Executing [xxx1463 at fax-out:1] Dial("IAX2/503-7761",
> "dahdi/g3/wwxxx1463") in new stack
>     -- Called g3/wwxxx1463
>     -- DAHDI/4-1 answered IAX2/503-7761
>     -- Registered IAX2 '503' (AUTHENTICATED) at xxx.xx.xx.xx:4570
> [Aug  1 09:04:59] NOTICE[3392]: chan_iax2.c:8486 update_registry:
> Restricting registration for peer '503' to 300 seconds (requested 60)
>     -- Registered IAX2 '503' (AUTHENTICATED) at xxx.xx.xx.xx:44145
> [Aug  1 09:05:03] NOTICE[3391]: chan_iax2.c:8486 update_registry:
> Restricting registration for peer '503' to 300 seconds (requested 60)
>     -- Hungup 'DAHDI/4-1'
>   == Spawn extension (fax-out, xxx1463, 1) exited non-zero on
> 'IAX2/503-7761'
>     -- Hungup 'IAX2/503-7761'
> 
> 
>  [root at drew home]# faxstat -s
> HylaFAX scheduler on host.xxxxx.com: Running
> Modem ttyIAX0 (+1.xxx.8626): Running and idle
> 
> JID  Pri S  Owner Number       Pages Dials     TTS Status
> 9    126 S   root xxx1463       0:1   1:12   16:10 No carrier
> detected
> 

Your setup looks correct. Can you connect a normal analog phone to the POTS line and dial that fax number directly? I just want to see if that is successful or not, indicating if the problem is PSTN related (need to dial 10 digits, or 1+10 for example in the US).

The interesting thing is the result within Hylafax is 'No Carrier' which means the call was indeed answered, but fax was not present on the other side.

--Tim