[asterisk-users] POTS(FXO) line getting Red alarm after first ring(5 or 6 seconds)
John Millican
john at millican.us
Thu Apr 26 18:45:26 CDT 2012
Hello,
I have an OpenVox A400E02 (2FXO) in a box running Debian 6.0.2 running
Asterisk 1.8.6.0. I have to POTS line on it from Verizon in Virginia,
USA. Whenever I place a call to one of the two lines I get a red alam
and then it clears and repeats this till I hang up. There is no caller
ID on the Line (boss won't pay for it).
Any help is most appreciated.
TIA,
JohnM
lspci relevent output:
08:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
interface
cat /proc/interrupts:
19: 54390 1286431613 IO-APIC-fasteoi wctdm
(no shared interupts)
dahdi show channels
Chan Extension Context Language MOH Interpret
Blocked State
pseudo default
default In Service
1 altrurstn
default In Service
2 altrurstn
default In Service
PBX1:/home/jmillican# dahdi_cfg -vvv
DAHDI Tools Version - 2.5.0.1
DAHDI Version: 2.5.0.1
Echo Canceller(s): HWEC, MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
2 channels to configure.
Setting echocan for channel 1 to mg2
Setting echocan for channel 2 to mg2
in chan_dahdi.conf
[channels]
context=altrurstn
signalling=fxs_ks
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
#include dahdi_additional.conf
#include dahdi-channels.conf
in dahdi-channels.conf
; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
;;; line="1 WCTDM/4/0"
signalling=fxs_ks
callerid=asreceived
group=0
context=altrurstn
channel => 1
callerid=
group=
context=altrurstn
;;; line="2 WCTDM/4/1"
signalling=fxs_ks
callerid=asreceived
group=0
context=altrurstn
channel => 2
callerid=
group=
context=altrurstn
/etc/dahdi/modules loads only wctdm.
/etc/dahdi/system.conf:
fxsks=1
echocanceller=mg2,1
fxsks=2
echocanceller=mg2,2
Relevent Extensions.conf:
[altrurstn-in]
exten => s,1,Wait(1);
exten => s,n,Set(CDR(accountcode)=fromoustide)
exten => s,n,Set(CDR(userfield)=POTS-${EXTEN})
exten => s,n,GoTo(999,1);
exten => 999,1,Answer();
exten => 999,n,NoOp(${CALLERID(all)});
exten => 999,n,wait(1);
exten => 999,n,Set(foo=0);
exten => 999,n,Set(count=0);
exten => 999,n,Read(foo,0001&0002,4,,,2);
exten => 999,n,GoToIf($["${foo}"="9"]?directory);
exten => 999,n,GoToIf($["${foo}"="0"]?oper)
exten => 999,n,GoToIf($["${LEN(${foo})}" < "4"]?restart:altrurstn,${foo},1);
exten => 999,n(restart),Set(COUNT=$[${COUNT} + 1]);
exten => 999,n,NoOp(${COUNT});
exten => 999,n,GoToIf($["${COUNT}" > "1"]?oper:continue);
exten => 999,n(continue),Read(foo,0002,4,,,2);
exten => 999,n,GoToIf($["${foo}"="9"]?directory);
exten => 999,n,GoToIf($["${foo}"="0"]?oper)
exten => 999,n,GoToIf($["${LEN(${foo})}"<"4"]?restart:altrurstn,${foo},1);
exten => 999,n(oper),GoTo(0,1);
exten => 999,n(directory),Directory(default,altrurstn,p(500));
exten => 999,n,Hangup();
What I get in the CLI:
[Apr 26 19:26:53] -- Starting simple switch on 'DAHDI/1-1'
[Apr 26 19:26:53] -- Executing [s at altrurstn-in:1] Wait("DAHDI/1-1",
"1") in new stack
[Apr 26 19:26:54] -- Executing [s at altrurstn-in:2] Set("DAHDI/1-1",
"CDR(accountcode)=fromoustide") in new stack
[Apr 26 19:26:54] -- Executing [s at altrurstn-in:3] Set("DAHDI/1-1",
"CDR(userfield)=POTS-s") in new stack
[Apr 26 19:26:54] -- Executing [s at altrurstn-in:4] Goto("DAHDI/1-1",
"999,1") in new stack
[Apr 26 19:26:54] -- Goto (altrurstn-in,999,1)
[Apr 26 19:26:54] -- Executing [999 at altrurstn-in:1]
Answer("DAHDI/1-1", "") in new stack
[Apr 26 19:26:54] -- Executing [999 at altrurstn-in:2]
NoOp("DAHDI/1-1", """ <>") in new stack
[Apr 26 19:26:54] -- Executing [999 at altrurstn-in:3]
Wait("DAHDI/1-1", "1") in new stack
[Apr 26 19:26:55] WARNING[11189]: chan_dahdi.c:7728 handle_alarms:
Detected alarm on channel 1: Red Alarm
[Apr 26 19:26:55] == Spawn extension (altrurstn-in, 999, 3) exited
non-zero on 'DAHDI/1-1'
[Apr 26 19:26:55] -- Hanging up on 'DAHDI/1-1'
[Apr 26 19:26:55] -- Hungup 'DAHDI/1-1'
[Apr 26 19:26:58] NOTICE[11159]: sig_analog.c:3709
analog_handle_init_event: Alarm cleared on channel 1
[Apr 26 19:26:59] -- Starting simple switch on 'DAHDI/1-1'
[Apr 26 19:26:59] -- Executing [s at altrurstn-in:1] Wait("DAHDI/1-1",
"1") in new stack
[Apr 26 19:27:00] -- Executing [s at altrurstn-in:2] Set("DAHDI/1-1",
"CDR(accountcode)=fromoustide") in new stack
[Apr 26 19:27:00] -- Executing [s at altrurstn-in:3] Set("DAHDI/1-1",
"CDR(userfield)=POTS-s") in new stack
[Apr 26 19:27:00] -- Executing [s at altrurstn-in:4] Goto("DAHDI/1-1",
"999,1") in new stack
[Apr 26 19:27:00] -- Goto (altrurstn-in,999,1)
[Apr 26 19:27:00] -- Executing [999 at altrurstn-in:1]
Answer("DAHDI/1-1", "") in new stack
[Apr 26 19:27:00] -- Executing [999 at altrurstn-in:2]
NoOp("DAHDI/1-1", """ <>") in new stack
[Apr 26 19:27:00] -- Executing [999 at altrurstn-in:3]
Wait("DAHDI/1-1", "1") in new stack
[Apr 26 19:27:01] WARNING[11190]: chan_dahdi.c:7728 handle_alarms:
Detected alarm on channel 1: Red Alarm
[Apr 26 19:27:01] == Spawn extension (altrurstn-in, 999, 3) exited
non-zero on 'DAHDI/1-1'
[Apr 26 19:27:01] -- Hanging up on 'DAHDI/1-1'
[Apr 26 19:27:01] -- Hungup 'DAHDI/1-1'
[Apr 26 19:27:04] NOTICE[11159]: sig_analog.c:3709
analog_handle_init_event: Alarm cleared on channel 1
[Apr 26 19:27:04] -- Starting simple switch on
'DAHDI/1-1' (This is where
I hang up the call)
[Apr 26 19:27:04] -- Executing [s at altrurstn-in:1] Wait("DAHDI/1-1",
"1") in new stack
[Apr 26 19:27:05] -- Executing [s at altrurstn-in:2] Set("DAHDI/1-1",
"CDR(accountcode)=fromoustide") in new stack
[Apr 26 19:27:05] -- Executing [s at altrurstn-in:3] Set("DAHDI/1-1",
"CDR(userfield)=POTS-s") in new stack
[Apr 26 19:27:05] -- Executing [s at altrurstn-in:4] Goto("DAHDI/1-1",
"999,1") in new stack
[Apr 26 19:27:05] -- Goto (altrurstn-in,999,1)
[Apr 26 19:27:05] -- Executing [999 at altrurstn-in:1]
Answer("DAHDI/1-1", "") in new stack
[Apr 26 19:27:05] -- Executing [999 at altrurstn-in:2]
NoOp("DAHDI/1-1", """ <>") in new stack
[Apr 26 19:27:05] -- Executing [999 at altrurstn-in:3]
Wait("DAHDI/1-1", "1") in new stack
[Apr 26 19:27:06] -- Executing [999 at altrurstn-in:4] Set("DAHDI/1-1",
"foo=0") in new stack
[Apr 26 19:27:06] -- Executing [999 at altrurstn-in:5] Set("DAHDI/1-1",
"count=0") in new stack
[Apr 26 19:27:06] -- Executing [999 at altrurstn-in:6]
Read("DAHDI/1-1", "foo,0001&0002,4,,,2") in new stack
[Apr 26 19:27:06] -- Accepting a maximum of 4 digits.
[Apr 26 19:27:06] -- <DAHDI/1-1> Playing '0001.gsm' (language 'en')
[Apr 26 19:27:09] -- <DAHDI/1-1> Playing '0002.gsm' (language 'en')
[Apr 26 19:27:17] -- User entered nothing.
More information about the asterisk-users
mailing list