[asterisk-users] HELP!! Caller ID "unknown" for all inbound call

[SamyGo]

do a complete reload(dahdi/asterisk/amportal) and then check.

On Mon, Apr 23, 2012 at 12:18 PM, Satria Anamarta
<anam.satria67 at gmail.com>wrote:

> Thanks Sammy for looking at my post :)
>
> Removing those 2 lines for all the channel still doesn't solve the problem
> :(
>
> Any other ways I should try?
>
> BR,
> Anam
>
> On 4/23/12, SamyGo <govoiper at gmail.com> wrote:
> > I see extra/additional  fields in the pasted configuration
> > dahdi-channels.conf, try removing these. Then do a "module reload
> > chan_dahdi"
> >
> >
> >> callerid=
> >> group=
> >
> >
> > Regards,
> > Sammy
> >
> > On Sun, Apr 22, 2012 at 12:49 PM, Satria Anamarta
> > <anam.satria67 at gmail.com>wrote:
> >
> >> This is a very strange problem (at least for me). I just realized that
> >> started from April 20th 2012 every inbound call is from "unknown".
> >> Prior that, asterisk succesfully displayed the caller caller's ID for
> SOME
> >> of the calls (30-50% success rate). I am using PBX | monitoring menu to
> >> see
> >> this report.
> >>
> >> As far as I remember, I dont modify any settings that related to caller
> >> ID, but few days ago (I dont remember the exact date), I modify the
> rxgain
> >> and txgain value in chan_dahdi.conf.
> >> The inbound caller ID doesn't display on the log and on the phone.
> >>
> >> I'm running asterisk 1.8.7.0
> >> FreePBX 2.8.1
> >> FXO card using Digium AEX800B
> >>
> >> The caller ID is display well on the phone If I connect the phone
> directly
> >> without connecting to asterisk (just for testing purpose)
> >>
> >> This is my chan_dahdi.conf
> >>
> >> [trunkgroups]
> >>
> >> [channels]
> >> context=from-pstn
> >> signalling=fxs_ks
> >> rxwink=300              ; Atlas seems to use long (250ms) winks
> >> usecallerid=yes
> >> hidecallerid=no
> >> callwaiting=yes
> >> usecallingpres=yes
> >> callwaitingcallerid=yes
> >> threewaycalling=yes
> >> transfer=yes
> >> canpark=yes
> >> cancallforward=yes
> >> callreturn=yes
> >> echocancel=yes
> >> echocancelwhenbridged=no
> >> faxdetect=incoming
> >> echotraining=800
> >> rxgain=8.0
> >> txgain=8.0
> >> callgroup=1
> >> pickupgroup=1
> >>
> >> ;Uncomment these lines if you have problems with the disconection of
> your
> >> analog lines
> >> ;busydetect=yes
> >> ;busycount=3
> >>
> >>
> >> immediate=no
> >>
> >> #include dahdi-channels.conf
> >> #include chan_dahdi_additional.conf
> >> chan_dahdi.conf (END)
> >>
> >> This is my dahdi-channels.conf
> >> ; Autogenerated by /usr/sbin/dahdi_genconf on Fri Mar 30 22:32:16 2012
> >> ; If you edit this file and execute /usr/sbin/dahdi_genconf again,
> >> ; your manual changes will be LOST.
> >> ; Dahdi Channels Configurations (chan_dahdi.conf)
> >> ;
> >> ; This is not intended to be a complete chan_dahdi.conf. Rather, it is
> >> intended
> >> ; to be #include-d by /etc/chan_dahdi.conf that will include the global
> >> settings
> >> ;
> >>
> >> ; Span 1: WCTDM/0 "Wildcard AEX800 Board 1" (MASTER)
> >> ;;; line="1 WCTDM/0/0 FXSKS"
> >> signalling=fxs_ks
> >> callerid=asreceived
> >> group=0
> >> context=from-pstn
> >> channel => 1
> >> callerid=
> >> group=
> >> context=default
> >>
> >> ;;; line="2 WCTDM/0/1 FXSKS"
> >> signalling=fxs_ks
> >> callerid=asreceived
> >> group=0
> >> context=from-pstn
> >> channel => 2
> >> callerid=
> >> group=
> >> context=default
> >>
> >> ;;; line="3 WCTDM/0/2 FXSKS"
> >> signalling=fxs_ks
> >> callerid=asreceived
> >> group=0
> >> context=from-pstn
> >> channel => 3
> >> callerid=
> >> group=
> >> context=default
> >>
> >> ;;; line="4 WCTDM/0/3 FXSKS"
> >> signalling=fxs_ks
> >> callerid=asreceived
> >> group=0
> >> context=from-pstn
> >> channel => 4
> >> callerid=
> >> group=
> >> context=default
> >>
> >> ;;; line="5 WCTDM/0/4 FXSKS"
> >> signalling=fxs_ks
> >> callerid=asreceived
> >> group=0
> >> context=from-pstn
> >> channel => 5
> >> callerid=
> >> group=
> >> context=default
> >>
> >> ;;; line="6 WCTDM/0/5 FXSKS"
> >> signalling=fxs_ks
> >> callerid=asreceived
> >> group=0
> >> context=from-pstn
> >> channel => 6
> >> callerid=
> >> group=
> >> context=default
> >>
> >> Any help would be very appeciated.
> >>
> >> Thanks and best regards,
> >> Anam.
> >>
> >> --
> >> _____________________________________________________________________
> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >> New to Asterisk? Join us for a live introductory webinar every Thurs:
> >>               http://www.asterisk.org/hello
> >>
> >> asterisk-users mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>   http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >
>
> --
> Sent from my mobile device
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120423/127e4ec5/attachment.htm>