[asterisk-users] asterisk 1.4.39 and dahdi 2.6

Eric Wieling EWieling at nyigc.com
Sun Apr 22 08:48:59 CDT 2012


Remove the Asterisk source dir, unpack the tarball again and run configure.  1.4 is weird about configure being built before DAHDI is installed.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of bilal ghayyad
Sent: Saturday, April 21, 2012 5:07 PM
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] asterisk 1.4.39 and dahdi 2.6

Dear;

The output of the ./configure that is related to dahdi is:

checking for DAHDI_RESET_COUNTERS in dahdi/user.h... yes checking dahdi/tonezone.h usability... yes checking dahdi/tonezone.h presence... yes checking for dahdi/tonezone.h... yes

And the dependecies of the chan_dahdi as I saw in the make menuselect is (but really I do not know what the M and E means, and how I can be sure if they are existed or not)?

Depends on: res_smdi(M), dahdi(E), tonezone(E), res_features(M), pri(E)

Any help?

Regards
Bilal
---------------

> > Well, I did make menuselect and I really found the XXX
> and did not get the ability to select the channel. So what could be 
> the reason?
> 
> When you are in menuselect, looking at the 'channels' page, scroll the 
> cursor down to chan_dahdi (marked with 'XXX'), and look at the bottom 
> of the window/screen. In that area there will be information about the 
> chan_dahdi dependencies that were or were not found by the the 
> configure script. If you can copy and paste that information here, we 
> can try to help you figure out what is going on. It's quite strange 
> that codec_dahdi successfully built but chan_dahdi did not; the 
> problem is likely not related to DAHDI, but due to some other 
> dependency that chan_dahdi has. As I said before, what we really 
> should be looking at is the configure script output that indicates 
> what it was able to find and what it was not able to find, but the 
> menuselect information is a reasonable next step.
> 
> 
> As Kevin said, you need to check the out put when you run ./configure.
> You could pipe it through less or copy-and-paste it into a text editor 
> to search it for anything about dahdi.  It should tell you what's 
> wrong.

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list