[asterisk-users] sip pregi net account registration
Gopalakrishnan N
gopalakrishnan.an at gmail.com
Wed Apr 11 03:33:02 CDT 2012
Hi Warren,
I was tracking through wireshark and I found the difference between the
eyebeam registration and Asterisk registration. I found the contact SIP URI
varies for these two.
With Eyebeam registration the contact is - "Contact-URI:
sip:1234 at 192.168.0.57:6506" whereas
with Asterisk the contact is - "Contact-URI:s at 192.168.0.57" here it is
routing to "s", thats the reason its not registering, I dont know why its
contacting "s".
Any suggestions would be appreciated.
Regards,
On Wed, Apr 11, 2012 at 1:24 PM, Gopalakrishnan N <
gopalakrishnan.an at gmail.com> wrote:
> My Setup is as follows, I am using Asterisk 1.4.36 with Asterisk GUI
> installed separately. And the machine is behind pfsense, and the IP of
> Asterisk machine is allowed in the pfsense. Even I tried to change the
> registration port number of sip.pregi.net to 6090 because eyebeam uses
> dynamic port. This is my setup.
>
> Regards,
>
> On Fri, Apr 6, 2012 at 12:33 AM, Warren Selby <wcselby at selbytech.com>wrote:
>
>>
>> On Apr 5, 2012, at 3:21 AM, Gopalakrishnan N <gopalakrishnan.an at gmail.com>
>> wrote:
>>
>> Hi guys,
>>
>> I am trying to configure sip.pregi.net account with my Asterisk 1.4.X,
>> since its a free account, its not getting registered, even my machine IP is
>> allowed in firewall. In the same machine if i register openser account
>> which is in public i am able to register. while checking the sip debug the
>> register request is keep on sending but there is no response.
>>
>> what i did is i registered the same account in my softphone installed in
>> my laptop, there it got registered. only with Asterisk its not registering,
>> I tried allowing externip as my routers IP, even then its not getting
>> registered.
>>
>>
>> What settings are you currently using, and what does your infrastructure
>> look like?
>>
>> --
>> Thanks,
>> Warren Selby, dCAP
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120411/43bd14b9/attachment.htm>
More information about the asterisk-users
mailing list