[asterisk-users] issue with Digium TDM410P

[Shaun Ruffell]

On Thu, Apr 05, 2012 at 01:07:11PM -0400, Mathieu Therrien wrote:
> I don't think neon use FSK, neon should use high voltage.  So I think,
> the issue should be on FSK in DAHDI module code.

It sounds like we're in agreement. Although, to be clear,
DAHDI-Linux (the kernel modules) do not generate or decode FSK
spills. That is done by chan_dahdi in Asterisk.

> On Thu, Apr 5, 2012 at 11:50, Shaun Ruffell <sruffell at digium.com> wrote:
> > On Thu, Apr 05, 2012 at 08:14:09AM -0400, Mathieu Therrien wrote:
> >> Thanks for answer.  Devices PAP2 and SPA3000 works good and use FSK for
> >> VMWI and CallerID, so I think TDM410P should also works.  CallerID works
> >> good.  So issue should be in source code of VMWI.
> >
> > Alec, If FSK is used for VMWI on his working setup, this doesn't
> > sound like it would be fixed by your "Generate VMWI neon pulses from
> > FXS module.." patch to the wctdm24xxp DAHDI driver [1] I'm assuming.
> > Must be something in chan_dahdi?
> >
> > But Now that the changes to the wctdm24xxp have calmed down (for
> > awhile now... :/) it looks like it might be time to try again to
> > rebase those patches on the current trunk.
> >
> > [1] https://reviewboard.asterisk.org/r/1144/
> >
> > Cheers,
> > Shaun
-- 
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org