No subject
Fri Sep 2 03:59:05 CDT 2011
built-in; This doesn=92t matter because the moderator would have to use
meetmeadmin or the confbridge equivalent to control the other functions.
The moderator would either need two phones or a phone and a web =
interface.
Let=92s say Yves=92 =93special conference=94 is 5555. The moderator =
would start
using this command
Exten =3D> s,1,meetme(5555)
The participants would do
Exten =3D> s,1,meetme(5555,m) =96 muted so they can listen but not talk
- there is one admin / moderator and several "normal" callers.
- the callers must not hear any other caller, only the moderator
=20
The moderator would need to be able to enumerate the conference by doing
Asterisk =96rx =93core show channels verbose=94|grep meetme
This is supposed to be doable from the dialplan but my google-fu failed =
me
on it.
- the moderator must be able to mute and unmute any caller at any time
=20
Establish a maximum number of users and set this up for each one
Exten =3D> 99,1,meetmeadmin(5555,M,1) let user 1 talk
Exten =3D> 199,1,meetmeadmin(5555,m,1) turn user 1 back off
- the moderator must be able to talk to all callers or to a specific =
caller.
Exten =3D> 901,1,chanspy(SIP/XXX,w)
- the modetator must be able to kick off any caller at any time...
Exten =3D> 299,1,meetmeadmin(5555,k,1) kick out user 1
Exten =3D> 666,1,meetmeadmin(5555,K) shut it down
=20
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Don Kelly
Sent: Wednesday, January 16, 2013 3:34 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] special conference room
=20
Sounds like a conference with all attendees permanently muted (except =
the
=93moderator=94).
=20
The moderator uses =93whisper=94 to communicate with individuals.
--Don
=20
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Yves A.
Sent: Wednesday, January 16, 2013 3:11 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] special conference room
=20
barat and danny,
thank you for your input...
I am using asterisk 11.2 and i read about meetme. Yes, it has many =
switches
and options and
can help me a lot... but as you already said... "does _almost_ all
features..."... unfortunately I
need ALL the constraints fulfilled... therefore i admit I have not tried =
it
in deep, because just
from reading the doc I realized, that it wont fit all my needs...
btw.: I understood the "mute" switch to disable the callers to talk to =
the
conference.. (so to say
it mutes the callers microphone, not his earphones.... am I wrong?=20
nevertheless... any more hints for my original feature-request?
thank you all,
yves
Am 16.01.2013 19:03, schrieb Bharat Lalcheta:
Please study meetme application's options. You will get almost all =
feature
you ask for in it
On Jan 16, 2013 5:37 AM, "Yves A." <yves030 at gmx.de> wrote:
Hi list,
I am in need of a "special" asterisk conference room with the following
constraints:
- there is one admin / moderator and several "normal" callers.
- the callers must not hear any other caller, only the moderator
- the moderator must be able to mute and unmute any caller at any time
- the moderator must be able to talk to all callers or to a specific =
caller.
- the modetator must be able to kick off any caller at any time...
Any hints on how to realize that are highly appreciated..
Thanx in advance,
yves
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
=20
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
=20
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
=20
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
=20
------=_NextPart_000_0254_01CDF407.F80A37A0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" =
xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta name=3DGenerator =
content=3D"Microsoft Word 14 (filtered medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
@font-face
{font-family:Consolas;
panose-1:2 11 6 9 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";
color:black;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p
{mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman","serif";
color:black;}
pre
{mso-style-priority:99;
mso-style-link:"HTML Preformatted Char";
margin:0in;
margin-bottom:.0001pt;
font-size:10.0pt;
font-family:"Courier New";
color:black;}
p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
{mso-style-priority:99;
mso-style-link:"Balloon Text Char";
margin:0in;
margin-bottom:.0001pt;
font-size:8.0pt;
font-family:"Tahoma","sans-serif";
color:black;}
span.HTMLPreformattedChar
{mso-style-name:"HTML Preformatted Char";
mso-style-priority:99;
mso-style-link:"HTML Preformatted";
font-family:Consolas;
color:black;}
span.BalloonTextChar
{mso-style-name:"Balloon Text Char";
mso-style-priority:99;
mso-style-link:"Balloon Text";
font-family:"Tahoma","sans-serif";
color:black;}
span.EmailStyle22
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.EmailStyle23
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.EmailStyle24
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]--></head><body bgcolor=3Dwhite =
lang=3DEN-US link=3Dblue vlink=3Dpurple><div class=3DWordSection1><p =
class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>You could set up the caller meetme where the user presses 1 to =
<o:p></o:p></span></p><p class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>Exit the conference<o:p></o:p></span></p><p class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>Whisper to the moderator<o:p></o:p></span></p><p =
class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>Rejoin the conference<o:p></o:p></span></p><p class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
D'><o:p> </o:p></span></p><div><div =
style=3D'border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in =
0in 0in'><p class=3DMsoNormal><b><span =
style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif";color:windowt=
ext'>From:</span></b><span =
style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif";color:windowt=
ext'> asterisk-users-bounces at lists.digium.com =
[mailto:asterisk-users-bounces at lists.digium.com] <b>On Behalf Of =
</b>Yves A.<br><b>Sent:</b> Wednesday, January 16, 2013 4:35 =
PM<br><b>To:</b> Asterisk Users Mailing List - Non-Commercial =
Discussion<br><b>Subject:</b> Re: [asterisk-users] special conference =
room<o:p></o:p></span></p></div></div><p =
class=3DMsoNormal><o:p> </o:p></p><div><p =
class=3DMsoNormal>ok,<br><br>now i have got some very valuable =
information to start off with. thank you all.<br>i=B4ll be back to =
report success or further questions...<br><br>just one thing, that i =
think might be a showstopper that i may have not<br>explained clear =
enough...:<br>muting and unmuting a caller should have the effect, that =
the caller can talk <br>to the moderator or not... any caller should =
NEVER hear what other callers<br>are talking... may he be muted or =
not...<br><br>yves<br><br>Am 16.01.2013 23:01, schrieb Danny =
Nicholas:<o:p></o:p></p></div><blockquote =
style=3D'margin-top:5.0pt;margin-bottom:5.0pt'><p =
class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>From what I read, neither confbridge or meetme have the whisper =
feature built-in; This doesn’t matter because the moderator =
would have to use meetmeadmin or the confbridge equivalent to control =
the other functions. The moderator would either need two phones or =
a phone and a web interface. Let’s say Yves’ =
“special conference” is 5555. The moderator would =
start using this command</span><o:p></o:p></p><p class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>Exten =3D> s,1,meetme(5555)</span><o:p></o:p></p><p =
class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>The participants would do</span><o:p></o:p></p><p =
class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>Exten =3D> s,1,meetme(5555,m) – muted so they can listen but =
not talk</span><o:p></o:p></p><p class=3DMsoNormal>- there is one admin =
/ moderator and several "normal" callers.<br>- the callers =
must not hear any other caller, only the moderator<o:p></o:p></p><p =
class=3DMsoNormal> <o:p></o:p></p><p class=3DMsoNormal>The =
moderator would need to be able to enumerate the conference by =
doing<o:p></o:p></p><p class=3DMsoNormal>Asterisk –rx “core =
show channels verbose”|grep meetme<o:p></o:p></p><p =
class=3DMsoNormal>This is supposed to be doable from the dialplan but my =
google-fu failed me on it.<br>- the moderator must be able to mute and =
unmute any caller at any time<o:p></o:p></p><p =
class=3DMsoNormal> <o:p></o:p></p><p class=3DMsoNormal>Establish a =
maximum number of users and set this up for each one<o:p></o:p></p><p =
class=3DMsoNormal>Exten =3D> 99,1,meetmeadmin(5555,M,1) let user 1 =
talk<o:p></o:p></p><p class=3DMsoNormal>Exten =3D> =
199,1,meetmeadmin(5555,m,1) turn user 1 back off<br>- the moderator must =
be able to talk to all callers or to a specific caller.<o:p></o:p></p><p =
class=3DMsoNormal>Exten =3D> 901,1,chanspy(SIP/XXX,w)<br>- the =
modetator must be able to kick off any caller at any =
time...<o:p></o:p></p><p class=3DMsoNormal>Exten =3D> =
299,1,meetmeadmin(5555,k,1) kick out user 1<o:p></o:p></p><p =
class=3DMsoNormal>Exten =3D> 666,1,meetmeadmin(5555,K) shut it =
down<br><br><br><o:p></o:p></p><p class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
D'> </span><o:p></o:p></p><div><div =
style=3D'border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in =
0in 0in'><p class=3DMsoNormal><b><span =
style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif";color:windowt=
ext'>From:</span></b><span =
style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif";color:windowt=
ext'> <a =
href=3D"mailto:asterisk-users-bounces at lists.digium.com">asterisk-users-bo=
unces at lists.digium.com</a> [<a =
href=3D"mailto:asterisk-users-bounces at lists.digium.com">mailto:asterisk-u=
sers-bounces at lists.digium.com</a>] <b>On Behalf Of </b>Don =
Kelly<br><b>Sent:</b> Wednesday, January 16, 2013 3:34 PM<br><b>To:</b> =
'Asterisk Users Mailing List - Non-Commercial =
Discussion'<br><b>Subject:</b> Re: [asterisk-users] special conference =
room</span><o:p></o:p></p></div></div><p =
class=3DMsoNormal> <o:p></o:p></p><p class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>Sounds like a conference with all attendees permanently muted =
(except the “moderator”).</span><o:p></o:p></p><p =
class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
D'> </span><o:p></o:p></p><p class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>The moderator uses “whisper” to communicate with =
individuals.</span><o:p></o:p></p><div><p class=3DMsoNormal =
style=3D'mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span =
lang=3DEN =
style=3D'font-size:10.0pt;font-family:"Arial","sans-serif";color:#1F497D'=
>--Don</span><o:p></o:p></p></div><div><div =
style=3D'border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in =
0in 0in'><p class=3DMsoNormal><span lang=3DEN =
style=3D'font-size:10.0pt;font-family:"Arial","sans-serif";color:#1F497D'=
> </span><o:p></o:p></p><p class=3DMsoNormal><b><span =
style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif";color:windowt=
ext'>From:</span></b><span =
style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif";color:windowt=
ext'> <a =
href=3D"mailto:asterisk-users-bounces at lists.digium.com">asterisk-users-bo=
unces at lists.digium.com</a> <a =
href=3D"mailto:[mailto:asterisk-users-bounces at lists.digium.com]">[mailto:=
asterisk-users-bounces at lists.digium.com]</a> <b>On Behalf Of </b>Yves =
A.<br><b>Sent:</b> Wednesday, January 16, 2013 3:11 PM<br><b>To:</b> =
Asterisk Users Mailing List - Non-Commercial =
Discussion<br><b>Subject:</b> Re: [asterisk-users] special conference =
room</span><o:p></o:p></p></div></div><p =
class=3DMsoNormal> <o:p></o:p></p><div><p class=3DMsoNormal>barat =
and danny,<br><br>thank you for your input...<br>I am using asterisk =
11.2 and i read about meetme. Yes, it has many switches and options =
and<br>can help me a lot... but as you already said... "does =
_almost_ all features..."... unfortunately I<br>need ALL the =
constraints fulfilled... therefore i admit I have not tried it in deep, =
because just<br>from reading the doc I realized, that it wont fit all my =
needs...<br>btw.: I understood the "mute" switch to disable =
the callers to talk to the conference.. (so to say<br>it mutes the =
callers microphone, not his earphones.... am I wrong? =
<br>nevertheless... any more hints for my original =
feature-request?<br><br>thank you all,<br>yves<br><br><br>Am 16.01.2013 =
19:03, schrieb Bharat Lalcheta:<o:p></o:p></p></div><blockquote =
style=3D'margin-top:5.0pt;margin-bottom:5.0pt'><p>Please study meetme =
application's options. You will get almost all feature you ask for in =
it<o:p></o:p></p><div><p class=3DMsoNormal>On Jan 16, 2013 5:37 AM, =
"Yves A." <<a =
href=3D"mailto:yves030 at gmx.de">yves030 at gmx.de</a>> =
wrote:<o:p></o:p></p><p class=3DMsoNormal>Hi list,<br><br>I am in need =
of a "special" asterisk conference room with the following =
constraints:<br><br>- there is one admin / moderator and several =
"normal" callers.<br>- the callers must not hear any other =
caller, only the moderator<br>- the moderator must be able to mute and =
unmute any caller at any time<br>- the moderator must be able to talk to =
all callers or to a specific caller.<br>- the modetator must be able to =
kick off any caller at any time...<br><br>Any hints on how to realize =
that are highly appreciated..<br><br>Thanx in =
advance,<br>yves<br><br><br>--<br>_______________________________________=
______________________________<br>-- Bandwidth and Colocation Provided =
by <a href=3D"http://www.api-digital.com" =
target=3D"_blank">http://www.api-digital.com</a> --<br>New to Asterisk? =
Join us for a live introductory webinar every Thurs:<br> =
<a =
href=3D"http://www.asterisk.org/hello" =
target=3D"_blank">http://www.asterisk.org/hello</a><br><br>asterisk-users=
mailing list<br>To UNSUBSCRIBE or update options visit:<br> <a =
href=3D"http://lists.digium.com/mailman/listinfo/asterisk-users" =
target=3D"_blank">http://lists.digium.com/mailman/listinfo/asterisk-users=
</a><o:p></o:p></p></div><p class=3DMsoNormal =
style=3D'margin-bottom:12.0pt'><br><br><br><o:p></o:p></p><pre>--<o:p></o=
:p></pre><pre>___________________________________________________________=
__________<o:p></o:p></pre><pre>-- Bandwidth and Colocation Provided by =
<a href=3D"http://www.api-digital.com">http://www.api-digital.com</a> =
--<o:p></o:p></pre><pre>New to Asterisk? Join us for a live introductory =
webinar every =
Thurs:<o:p></o:p></pre><pre> &nb=
sp; <a =
href=3D"http://www.asterisk.org/hello">http://www.asterisk.org/hello</a><=
o:p></o:p></pre><pre> <o:p></o:p></pre><pre>asterisk-users mailing =
list<o:p></o:p></pre><pre>To UNSUBSCRIBE or update options =
visit:<o:p></o:p></pre><pre> <a =
href=3D"http://lists.digium.com/mailman/listinfo/asterisk-users">http://l=
ists.digium.com/mailman/listinfo/asterisk-users</a><o:p></o:p></pre></blo=
ckquote><p class=3DMsoNormal> <o:p></o:p></p><p =
class=3DMsoNormal><br><br><br><o:p></o:p></p><pre>--<o:p></o:p></pre><pre=
>_____________________________________________________________________<o:=
p></o:p></pre><pre>-- Bandwidth and Colocation Provided by <a =
href=3D"http://www.api-digital.com">http://www.api-digital.com</a> =
--<o:p></o:p></pre><pre>New to Asterisk? Join us for a live introductory =
webinar every =
Thurs:<o:p></o:p></pre><pre>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
<a =
href=3D"http://www.asterisk.org/hello">http://www.asterisk.org/hello</a><=
o:p></o:p></pre><pre><o:p> </o:p></pre><pre>asterisk-users mailing =
list<o:p></o:p></pre><pre>To UNSUBSCRIBE or update options =
visit:<o:p></o:p></pre><pre>=A0=A0 <a =
href=3D"http://lists.digium.com/mailman/listinfo/asterisk-users">http://l=
ists.digium.com/mailman/listinfo/asterisk-users</a><o:p></o:p></pre></blo=
ckquote><p class=3DMsoNormal><o:p> </o:p></p></div></body></html>
------=_NextPart_000_0254_01CDF407.F80A37A0--
More information about the asterisk-users
mailing list