[asterisk-users] [asterik-users] Installing PRI card

[Mike Beirne]

On 9/29/2011 2:52 PM, NaJIm wrote:
> IRQ misses: 2

You are risking lots of audio problems if the card shares the IRQ with
any other device. Try and go in the BIOS and disable the other device or
change the IRQ it is using so that they do not conflict.

What version of zaptel are you running?

What zaptel commands have you tried?

Have you added any lines to zaptel.conf and zapata.conf?

Who is your Telco provider and what signalling are they using on the T1?

It looks like there is a control channel on 24, but 16 isn't showing the
same status as I would expect.

Mike