[asterisk-users] Add PinCode on my dialplan

Thu Sep 22 06:06:45 CDT 2011

Dear Malvin,

I see Sam worked hard to post you the whole info about the application where
it clearly states the use of  option "a" - Please change the configuration
line accordingly now and see if it works for you.

Best Regards,

Gohar

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Malvin Rito
Sent: Thursday, September 22, 2011 3:50 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Add PinCode on my dialplan

Hi,

I tried Authenticate where pass codes are stored on the file pass.conf and
it works. 

exten => _XXXXXXXXXXXX,1,Authenticate(/etc/asterisk/pass.conf)

Since I have my CDR, I want to have a report wherein I can check which pass
code did the call. How can I achieve it?
Using authenticate through file does not replace ACCOUNT_CODE field with the
pass code entered, it only show ast_h323 under the Account_Code field.

Regards,
Malvin

On 9/21/2011 1:01 PM, Sam Govind wrote: 

See "core show application authe<TAB>"

If passwords are already the same as those of voicemail.conf go for
application VMAuthenticate() - DIA generates a dial-tone which I don't think
is suitable for dialling out from users(insiders)

  -= Info about application 'Authenticate' =-

[Synopsis]

Authenticate a user

[Description]

This application asks the caller to enter a given password in order to
continue

dialplan execution.

If the password begins with the '/' character,  it is interpreted as a file

which contains a list of valid passwords, listed 1 password per line in the

file.

When using a database key, the value associated with the key can be
anything.

Users have three attempts to authenticate before the channel is hung

up.

[Syntax]

Authenticate(password[,options[,maxdigits[,prompt]]])

[Arguments]

password

    Password the user should know

options

    a: Set the channels' account code to the password that is entered

    d: Interpret the given path as database key, not a literal file

    m: Interpret the given path as a file which contains a list of account

    codes and password hashes delimited with ':', listed one per line in the

    file. When one of the passwords is matched, the channel will have its

    account code set to the corresponding account code in the file.

    r: Remove the database key upon successful entry (valid with 'd'

    only)

maxdigits

    maximum acceptable number of digits. Stops reading after maxdigits

    have been entered (without requiring the user to press the '#' key).

    Defaults to 0 - no limit - wait for the user press the '#' key.

prompt

    Override the agent-pass prompt file.

[See Also]

VMAuthenticate(), DISA()

On Wed, Sep 21, 2011 at 9:47 AM, Malvin Rito <mrito at mail.altcladding.com.ph>
wrote:

Thanks. ?If I want to use unique PIN for every user that dials out how can I
implement it using Authenticate app?

Regards,
Malvin 

On 9/21/2011 12:42 PM, Sam Govind wrote: 

DISA and DB based Auth could be an overkill. 

Kyle showed the very simplistic dial plan if Dial-out pin is common for the
whole system.

See application Authenticate(password[,options[,maxdigits[,prompt]]] and if
Voicemail PIN are required to be used use application
MAuthenticate([mailbox][@context][,options]  

Regards,

- Sammy

On Wed, Sep 21, 2011 at 8:32 AM, Kyle Sexton <ks at mocker.org> wrote:

Something like this should work: 

exten => _011.,1,Answer

exten => _011.,n,Wait(1)

exten => _011.,n,Read(password,enter-password,5)

exten => _011.,n,GotoIf($[${password} = 12345]?5:9)

exten => _011.,n,NoOp(Matched _9011 - CheckRec-InternationalCall)

exten => _011.,n,Dial(SIP/+${EXTEN:3}@outbound)

exten => _011.,n,Hangup

exten => _011.,n,Playback(invalid)

exten => _011.,n,Hangup

Could be cleaned up (the GotoIf isn't very descriptive about where it's
going), but it's a starting point.

On Sep 20, 2011, at 8:34 AM, Malvin Rito wrote:

Hi List,
I currently have a asterisk server running used for dialing-out for IDD but
I want to Put a pincode wherein only users with the right pin code will be
allowed to dial IDD. Any sample dialplan you can suggest pls?

Thanks,
Malvin

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110922/01571f49/attachment.htm>