[asterisk-users] how to know RTP por of a SIP client in

[ISABEL ORDAS ARNAL]

Yes, I need to know to get in in dialplan because I want to capture traffic per call. I would like to launch $SHELL{tcpdump src port xxxx} in the dialplan or something like this. And I want RTP traffic only of a certain call.
Thank you!

=======================
Date: Fri, 21 Oct 2011 09:41:39 -0400
From: Bruce B <bruceb444 at gmail.com>
Subject: Re: [asterisk-users] how to know RTP por of a SIP client in
        the     dialplan
To: Asterisk Users Mailing List - Non-Commercial Discussion
        <asterisk-users at lists.digium.com>
Message-ID:
        <CAJyE_uWLRXkhrWQ-6SvNW1ihN-nGA3HFwHt=PU-tfR6LYbi5mg at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Do you need to know to get it in dialplan? If I not, from shell (not
Asterisk CLI) I usually use:

netstata -a | grep asterisk

By default Asterisk settings it should be something between 10k-20k

-Bruce

On Fri, Oct 21, 2011 at 3:46 AM, ISABEL ORDAS ARNAL <ioa at tid.es> wrote:

>  Hi all, ****
>
> How can I get the RTP port one SIP client is using for sending/receiving
> RTP flow? Can I obtain it in from SIP_HEADER of something like that in the
> dialplan?****
>
> Thank you!****
>
> ** **
>
> Isabel****
>


Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra política de envío y recepción de correo electrónico en el enlace situado más abajo.
This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at.
http://www.tid.es/ES/PAGINAS/disclaimer.aspx