[asterisk-users] how to know RTP por of a SIP client in the dialplan

[Bruce B]

Do you need to know to get it in dialplan? If I not, from shell (not
Asterisk CLI) I usually use:

netstata -a | grep asterisk

By default Asterisk settings it should be something between 10k-20k

-Bruce

On Fri, Oct 21, 2011 at 3:46 AM, ISABEL ORDAS ARNAL <ioa at tid.es> wrote:

>  Hi all, ****
>
> How can I get the RTP port one SIP client is using for sending/receiving
> RTP flow? Can I obtain it in from SIP_HEADER of something like that in the
> dialplan?****
>
> Thank you!****
>
> ** **
>
> Isabel****
>
> ------------------------------
> Este mensaje se dirige exclusivamente a su destinatario. Puede consultar
> nuestra política de envío y recepción de correo electrónico en el enlace
> situado más abajo.
> This message is intended exclusively for its addressee. We only send and
> receive email on the basis of the terms set out at.
> http://www.tid.es/ES/PAGINAS/disclaimer.aspx
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20111021/f7faf373/attachment-0001.htm>