[asterisk-users] DID and how the caller id will appear

[mahesh katta]

Bialal,

what hw you are using  and what is the h/w files. ?



On Tue, Oct 18, 2011 at 5:23 PM, bilal ghayyad <bilmar_gh at yahoo.com> wrote:

> Dears;
>
> We contacted the Telecom provider and they confirmed multiple times that
> the DID service is enabled, but again still the caller id does not appear as
> we need (it is always appearing as the primary number). I tried to set the
> CALLERDID(num) to be 40, 1040, 5631040 and 065631040 without any result.
>
> Where could be the problem?
>
> Maybe I have to use CALLERID(ANI)? Well, how it should be written exactly?
>
> What other things I have to do or I can try to resolve the problem?
>
> Regards
> Bilal
>
> ---------------
> >
> > Hi
> >
> > try to add this
> >
> > exten => _90ZXXXXXXXX,1,Set(CALLERPRES()=allowed)
> > exten => _90ZXXXXXXXX,n,Set(CALLERID(num)=5631040)
> >
> > if you get the same result that is means that you don't
> > have permission from
> > your provider
> >
> >
> > kind regards
> >
> > 2011/9/26 C F <shmaltz at gmail.com>
> >
> > > Confirm with your provider that allow you to set
> > caller id on outbound.
> > >
> > >
> > > On Sun, Sep 25, 2011 at 1:59 PM, bilal ghayyad <bilmar_gh at yahoo.com>
> > > wrote:
> > > > Dear;
> > > >
> > > > By the way, the asterisk version is: 1.8.4.2
> > > >
> > > > Yes I tried Set(CALLERID(num)=5631040) as shown
> > in the below dialing, and
> > > no success. Also I tried Set(CALLERID(num)=1040) and I
> > tried
> > > Set(CALLERID(num)=065631040) as the city code is 06
> > and when we call any
> > > mobile, it is appearing 065631040, but all of this did
> > not work.
> > > >
> > > > Do I have to use SetCallerPres? What is the
> > value?
> > > >
> > > > The E1 is located in Jordan and it is PRI with 30
> > channels. Is there any
> > > thing need to be set other than Set(CALLERID(num)? I
> > am afraid that I have
> > > to set a specific value for SetCallerPress !
> > > >
> > > > Well, I have also a question: What should I set
> > the callerid when I am
> > > configuring the IP Phone in the sip.conf?
> > > >
> > > > By the way: what is the difference between using
> > > Set(CALLERID(num)=5631040) and the callerid in the
> > sip.conf?
> > > >
> > > > Kindly find below my dialing plan:
> > > >
> > > > exten =>
> > _90ZXXXXXXXX,1,Set(CALLERID(num)=5631040)
> > > > exten =>
> > >
> >
> _90ZXXXXXXXX,2,MixMonitor(${CHANNEL}${EXTEN:1}${STRFTIME(${EPOCH},,%Y%m%d%H%M%S)}.wav)
> > > > exten =>
> > _90ZXXXXXXXX,3,Dial(${PSTNTRUNK}/${EXTEN:1})
> > > > exten =>
> > _90ZXXXXXXXX,4,Playback(vm-nobodyavail)
> > > > exten => _90ZXXXXXXXX,5,Hangup()
> > > > exten => _90ZXXXXXXXX,104,Congestion() ; if no
> > channel available
> > > > exten => _90ZXXXXXXXX,105,Hangup()
> > > >
> > > >
> > > > -----------------------
> > > >
> > > >
> > > >>
> > > >> Set(CALLERID(num)=5631040)
> > > >> add this before the Dial command.
> > > >>
> > > >> On Sat, Sep 24, 2011 at 4:03 PM, bilal
> > ghayyad <bilmar_gh at yahoo.com>
> > > >> wrote:
> > > >> > Hi All;
> > > >> >
> > > >> > The DID range that we took from the
> > telecom starts
> > > >> from 1030 and end by 1059, now whenever we
> > place a call, the
> > > >> destination see the number 5631030. I gave
> > the phone
> > > >> extension 1040, and when I call, still the
> > destination see
> > > >> the number is 5631030?
> > > >> >
> > > >> > Kindly find below the configuration of
> > the extension
> > > >> 1040, please what I have also to configure so
> > when this
> > > >> extension make a call, the destination see it
> > 5631040?
> > > >> >
> > > >> > [1040]
> > > >> > type=friend
> > > >> > host= dynamic
> > > >> > callerid=1040
> > > >> > disallow=all
> > > >> > allow=alaw
> > > >> > allow=ulaw
> > > >> > allow=g729
> > > >> > context=External
> > > >> > dtmfmode=auto
> > > >> > nat=no
> > > >> > qualify=no
> > > >> > canreinvite=yes
> > > >> > username=1040
> > > >> > secret=*******
> > > >> >
> > > >> > Regards
> > > >> > Bilal
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20111018/2ec196cb/attachment.htm>