[asterisk-users] dahdi show status command not avilable in CLI
Sammy Govind
govoiper at gmail.com
Fri Oct 7 12:41:06 CDT 2011
Please paste the configurations in the #included files as well.
On Fri, Oct 7, 2011 at 7:07 PM, michael k <michael at inapp.com> wrote:
> Hi,
>
>
> This is my /etc/asterisk/chan_dahdi.conf file.
>
>
> [root at astrisks asterisk]# cat /etc/asterisk/chan_dahdi.conf
> ; Copied from DAHDI Module of FreePBX
>
> [general]
>
> #include chan_dahdi_general.conf
>
> [channels]
>
> ; include dahdi groups defined by DAHDI module of FreePBX
> #include chan_dahdi_groups.conf
>
> ;added by mic 06-oct-20011
> #include /etc/asterisk/dahdi-channels.conf
>
> ; include dahdi extensions defined in FreePBX
> #include chan_dahdi_additional.conf
>
>
> Any issues in this ?
>
> Michael.k
>
>
>
> On Fri, Oct 7, 2011 at 7:19 PM, Eric Wieling <EWieling at nyigc.com> wrote:
>
>> It is likely you have an error in your /etc/asterisk/chan_dahdi.conf
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com [mailto:
>> asterisk-users-bounces at lists.digium.com] On Behalf Of michael k
>> Sent: Friday, October 07, 2011 9:24 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] dahdi show status command not avilable in
>> CLI
>>
>> Hi,
>>
>> I am getting this error message while executing the "module load
>> chan_dahdi.so".
>>
>> astrisks*CLI> module load chan_dahdi.so
>>
>> Unable to load module chan_dahdi.so
>> Command 'module load chan_dahdi.so' failed.
>> == Parsing '/etc/asterisk/chan_dahdi.conf': == Found
>> == Parsing '/etc/asterisk/chan_dahdi_general.conf': == Found
>> == Parsing '/etc/asterisk/chan_dahdi_groups.conf': == Found
>> == Parsing '/etc/asterisk/dahdi-channels.conf': == Found
>> == Parsing '/etc/asterisk/chan_dahdi_additional.conf': == Found
>>
>>
>> Thanks,
>>
>> Michael.k
>>
>>
>>
>> On Thu, Oct 6, 2011 at 9:44 PM, Eric Wieling <EWieling at nyigc.com> wrote:
>>
>>
>> What happens when you do the module load chan_dahdi.so command?
>>
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com [mailto:
>> asterisk-users-bounces at lists.digium.com] On Behalf Of michael k
>>
>> Sent: Thursday, October 06, 2011 12:10 PM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] dahdi show status command not
>> avilable in CLI
>>
>> Hi,
>>
>>
>> astrisks*CLI> module unload chan_dahdi.so
>>
>> Unable to unload resource chan_dahdi.so
>> Command 'module unload chan_dahdi.so ' failed.
>>
>> Producing some other error messages !!!!!
>>
>>
>> On Thu, Oct 6, 2011 at 9:17 PM, Eric Wieling <EWieling at nyigc.com>
>> wrote:
>>
>>
>> In the Asterisk CLI run the commands "module unload
>> chan_dahdi.so" and "module load chan_dahdi.so".
>>
>>
>>
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com [mailto:
>> asterisk-users-bounces at lists.digium.com] On Behalf Of michael k
>> Sent: Thursday, October 06, 2011 11:40 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] dahdi show status command not
>> avilable in CLI
>>
>> Hi,
>>
>> I was run the commands "dahdi_genconf" and dahdi_cfg
>> outside the CLI as the part of x100p card installation. Before issuing this
>> command the dahdi show status command was available. There may any issues ?
>>
>>
>> Michael.k
>>
>>
>>
>> On Thu, Oct 6, 2011 at 8:59 PM, gincantalupo <
>> gincantalupo at fgasoftware.com> wrote:
>>
>>
>>
>> Hi Michael,
>>
>> what if you reload the module chan_dahdi from within
>> the * CLI? It should give some hints.....
>>
>> Giorgio
>>
>>
>>
>> On 10/06/2011 05:22 PM, michael k wrote:
>>
>> Hi Giorgio,
>>
>> Thanks for your reply. I will produce some
>> output for your reference.
>>
>> # lsmod | grep dahdi
>>
>> dahdi_echocan_mg2 39688 1
>> dahdi_transcode 42372 1 wctc4xxp
>> dahdi_voicebus 79424 2
>> wctdm24xxp,wcte12xp
>> dahdi 238384 14
>> dahdi_echocan_mg2,xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,wct4xxp
>> crc_ccitt 35265 2
>> wctdm24xxp,dahdi
>>
>>
>> # service dahdi status
>>
>> ### Span 1: WCFXO/0 "Wildcard X100P Board 1"
>> (MASTER)
>> 1 FXO FXSKS (SWEC: MG2)
>> (battery)
>>
>>
>> # dahdi_cfg -vv
>>
>> DAHDI Tools Version - 2.3.0
>>
>> DAHDI Version: 2.3.0.1
>> Echo Canceller(s): MG2
>> Configuration
>> ======================
>>
>> Channel map:
>>
>> Channel 01: FXS Kewlstart (Default) (Echo
>> Canceler: mg2) (Slaves: 01)
>>
>> 1 channels to configure.
>>
>> Setting echocan for channel 1 to mg2
>>
>>
>> # dahdi_scan
>>
>> [1]
>> active=yes
>> alarms=OK
>> description=Wildcard X100P Board 1
>> name=WCFXO/0
>> manufacturer=Digium
>> devicetype=Wildcard X100P
>> location=PCI Bus 02 Slot 02
>> basechan=1
>> totchans=1
>> irq=193
>> type=analog
>> port=1,FXO
>>
>>
>> These outputs shows that the modules are
>> loaded correctly. Any other clues ?
>>
>> Michael.k
>>
>>
>>
>> On Thu, Oct 6, 2011 at 8:43 PM, gincantalupo
>> <gincantalupo at fgasoftware.com> wrote:
>>
>>
>> Hi Michael,
>>
>> if you type "dah" followed by TAB and
>> nothing appears, it means you do not have dahdi module loaded or dahdi_cfg
>> application not launched before starting asterisk.
>>
>> Giorgio
>>
>>
>> On 10/06/2011 04:57 PM, michael k
>> wrote:
>>
>> Hi All,
>>
>> I have installed
>> asteriskNow with Asterisk 1.6.2.11 and FreePBX 2.7.0.10. I have configured
>> x100p fxo card in my asterisk box. But in my cli mode i am not getting the
>> command "dahdi show status"
>>
>>
>> Output of CLI :
>>
>> astrisks*CLI> dahdi show
>> status
>> No such command 'dahdi show
>> status' (type 'core show help dahdi show' for other possible commands)
>>
>>
>> I really not understand why
>> this command is not avilable in CLI mode. Please help me to resolve this
>> issue
>>
>>
>> Michael.k
>>
>>
>> --
>>
>> _____________________________________________________________________
>> -- Bandwidth and Colocation
>> Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for
>> a live introductory webinar every Thurs:
>>
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update
>> options visit:
>>
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>> --
>>
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided
>> by http://www.api-digital.com --
>> New to Asterisk? Join us for a live
>> introductory webinar every Thurs:
>>
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options
>> visit:
>>
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>
>> --
>>
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by
>> http://www.api-digital.com --
>> New to Asterisk? Join us for a live
>> introductory webinar every Thurs:
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>> --
>>
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by
>> http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory
>> webinar every Thurs:
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>
>> --
>>
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by
>> http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar
>> every Thurs:
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>
>> --
>>
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com--
>> New to Asterisk? Join us for a live introductory webinar every
>> Thurs:
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20111007/25fcb81d/attachment.htm>
More information about the asterisk-users
mailing list