[asterisk-users] Beep file with Record

Sammy Govind govoiper at gmail.com
Wed Oct 5 02:25:41 CDT 2011 

Since you've changed the language (sound directory) So just as a test change
the language back to "en" and if it goes well revert back language after the
recording.


On Wed, Oct 5, 2011 at 12:20 PM, Arjan Kroon | Mobillion <
Arjan.Kroon at mobillion.nl> wrote:

> CLI::****
>
> -- Executing [s@ serviceline:93] Record("CAPI/ISDN1#02/318647615-37",
> "/var/lib/asterisk/sounds/recordings/serviceline/1317737932.67.wav,0,60") in
> new stack ****
>
> [Oct  4 16:19:38] WARNING[13370]: file.c:644 ast_openstream_full: File beep
> does not exist in any format ****
>
> [Oct  4 16:19:38] WARNING[13370]: file.c:950 ast_streamfile: Unable to open
> beep (format 0x8 (alaw)): No such file or directory ****
>
> [Oct  4 16:19:38] WARNING[13370]: app_record.c:281 record_exec:
> ast_streamfile failed on CAPI/ISDN1#02/318647615-37
>
> ****
>
> ** **
>
> In de Conf file I use the following command:****
>
> exten =>
> s,n,Set(A_serviceline_file=/var/lib/asterisk/sounds/recordings/serviceline/${UNIQUEID)
> ****
>
> exten => s,n,Record(${A_serviceline_file}.wav,0,60)
>
> ****
>
> I don’t call the beep file in my dialplan.****
>
> ** **
>
> ** **
>
> *Van:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *Namens *Sammy Govind
> *Verzonden:* 05-10-2011 09:04
>
> *Aan:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Onderwerp:* Re: [asterisk-users] Beep file with Record****
>
> ** **
>
> How are you calling the beep.alaw from the dialplan?****
>
> paste the relevant dialplan here and corresponding CLI logs.****
>
> ** **
>
> On Wed, Oct 5, 2011 at 11:58 AM, Arjan Kroon | Mobillion <
> Arjan.Kroon at mobillion.nl> wrote:****
>
> I placed a beep.alaw file in de directory, but I get the same result.
>
> Also I try to set the language just with two characters.
> (exten => s,n,Set(CHANNEL(language)=nl))
> And in the directory /var/lib/asterisk/sounds/nl/ I placed the voicefile
> beep.alaw.
> But with this also I get also the same result.****
>
>
> -----Oorspronkelijk bericht-----
> Van: asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] Namens Danny Nicholas****
>
> Verzonden: 04-10-2011 17:16****
>
> Aan: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Onderwerp: Re: [asterisk-users] Beep file with Record
>
> I see two "problems" here.  Problem 1 is that you are using the alaw codec,
> so it seems to me that you need this file to exist -
> /var/lib/asterisk/sounds/nl/fvdb/beep.alaw.  problem 2 is possibly just in
> my head as I am still avoiding Asterisk 1.8 like the plague;  AFAIK (or this
> is just a 1.4 thing?) Set(CHANNEL(language)=xx) xx should just be 2
> characters, not xx/yyyy (nl/fvdb) (feel free to correct my assumption that
> language has not been expanded beyond the 2 character limitation)?
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] On Behalf Of Arjan Kroon |
> Mobillion
> Sent: Tuesday, October 04, 2011 9:43 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Beep file with Record
>
> Yes,
>
> In the code I use set the language
> exten => s,n,Set(CHANNEL(language)=nl/fvdb)
>
> So therefore I try also to place the file in the directory
> /var/lib/asterisk/sounds/nl/fvdb/
>
>
> -----Oorspronkelijk bericht-----
> Van: asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] Namens Andrew Latham
> Verzonden: 04-10-2011 16:41
> Aan: Asterisk Users Mailing List - Non-Commercial Discussion
> Onderwerp: Re: [asterisk-users] Beep file with Record
>
> On Tue, Oct 4, 2011 at 11:37 AM, Arjan Kroon | Mobillion <
> Arjan.Kroon at mobillion.nl> wrote:
> > This is my complete CLI logging
> >
> > -- Executing [s@ serviceline:93] Record("CAPI/ISDN1#02/318647615-37",
> > "/var/lib/asterisk/sounds/recordings/serviceline/1317737932.67.wav,0,6
> > 0") in new stack [Oct  4 16:19:38] WARNING[13370]: file.c:644
> > ast_openstream_full: File beep does not exist in any format [Oct  4
> > 16:19:38] WARNING[13370]: file.c:950 ast_streamfile: Unable to open
> > beep (format 0x8 (alaw)): No such file or directory [Oct  4 16:19:38]
> > WARNING[13370]: app_record.c:281 record_exec: ast_streamfile failed on
> > CAPI/ISDN1#02/318647615-37
> >
> > In de Conf file I use the following command:
> > exten =>
> > s,n,Set(A_serviceline_file=/var/lib/asterisk/sounds/recordings/service
> > line/${UNIQUEID) exten => s,n,Record(${A_serviceline_file}.wav,0,60)
> >
> >
> > -----Oorspronkelijk bericht-----
> > Van: asterisk-users-bounces at lists.digium.com
> > [mailto:asterisk-users-bounces at lists.digium.com] Namens Danny Nicholas
> > Verzonden: 04-10-2011 16:30
> > Aan: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> > Onderwerp: Re: [asterisk-users] Beep file with Record
> >
> > Usually this message is received because you did something like
> > playback(beep.gsm) or playback(beep.wav) instead of playback(beep).
> > It is
> > (IMO) somewhat confusing because you have to do record(foo.gsm) but
> > you have to playback using playback(foo).
> >
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com
> > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Arjan
> > Kroon | Mobillion
> > Sent: Tuesday, October 04, 2011 9:21 AM
> > To: asterisk-users at lists.digium.com
> > Subject: [asterisk-users] Beep file with Record
> >
> > Hi,
> >
> > I'm using the functionality Record in asterisk 1.8.5.
> > But when I want to record something I get the following error message:
> > file.c:644 ast_openstream_full: File beep does not exist in any format
> >
> > Could anybody tell me where I have to place the beep.gsm file?
> > I already tried the following directories:
> >        /var/lib/asterisk/sounds/beep.gsm
> >        /var/lib/asterisk/sounds/recordings/beep.gsm
> >
> > Regards,
> >
> > Arjan Kroon
>
> Beep is called from
> http://svn.asterisk.org/svn/asterisk/trunk/apps/app_record.c and it looks
> fine a first glance.  Are you using the language prefix?
>
> --
> ~ Andrew "lathama" Latham lathama at gmail.com http://lathama.net ~
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New
> to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New
> to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users****
>
> ** **
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20111005/43d4842b/attachment.htm>

More information about the asterisk-users mailing list