[asterisk-users] Setting outbound PRI Callerid with Asterisk 10.0.0-beta2

[asterisk users]

Same result:
  Executing [s at incoming:3] NoOp("SIP/choicetel-00000092",
"CALLERID(all): "\" <5191112222>") in new stack

On Fri, Nov 18, 2011 at 2:05 PM, Danny Nicholas <danny at debsinc.com> wrote:
> Just a hunch
>  same => n,Set(CALLERID(name)="AB\&CD COMPANY")
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of asterisk users
> Sent: Friday, November 18, 2011 2:03 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [asterisk-users] Setting outbound PRI Callerid with Asterisk
> 10.0.0-beta2
>
> Hello all,
>
> I'm having trouble setting the callerid name and number independently with
> the following configuration:
>
> Asterisk 10.0.0-beta2
> DAHDI Version: 2.5.0 Echo Canceller: HWEC, MG2 libpri version: 1.4.12
> Allstream PRI 23+D / dms100
>
> Test cases:
>
> (1) Using the form:
>    same => n,Set(CALLERID(all)="AB&CD COMPANY" <5191112222>)
>    same => n,Dial(Dahdi/G1/5193334444)
> both the caller ID and name are passed correctly to the called party
>
> (2) However, if we try to set the number and name separately
>  same => n,Set(CALLERID(name)="AB&CD COMPANY")
>  same => n,Set(CALLERID(number)=5191112222)
>  same => n,Dial(Dahdi/G1/5193334444)
> then with some called numbers, we get a congestion message ("All circuits
> are busy") unless the first CALLERID(name) line is commented out.
> With other numbers the call completes, but the received callerid shows
> as: "CALLERID(all): "\" <5191112222>"
>
> Is there some subtle difference between these two methods, or would anyone
> have some experience with this?
>
> Thanks for any comments, and Happy Friday!
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to
> Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>