[asterisk-users] To know if the ISDN PRI E1 is UP?

[Gopal krishnan]

your PRI is not up. You can see this "Status: In Alarm, Down, Active" it
means you have some error. Some parameter is not correct with the
configuration and with your line. If you are using Sangoma card then please
check this link http://wiki.sangoma.com/wanpipe-linux-asterisk-debugging

On Tue, May 31, 2011 at 6:02 PM, bilal ghayyad <bilmar_gh at yahoo.com> wrote:

> Hi All;
>
> This is the output of the pri show status, so I appreciate if to know if
> that means the E1 is UP? What does it means that the status us (Status: In
> Alarm, Down, Active)? What in the below result give an indication that it is
> UP?
>
> CC*CLI> pri show span 1
> Primary D-channel: 16
> Status: In Alarm, Down, Active
> Switchtype: EuroISDN
> Type: Network
> Overlap Dial: 0
> Logical Channel Mapping: 0
> Timer and counter settings:
>  N200: 3
>  N202: 3
>  K: 7
>  T200: 1000
>  T202: 10000
>  T203: 10000
>  T303: 4000
>  T305: 30000
>  T308: 4000
>  T309: 6000
>  T313: 4000
>  T-HOLD: 4000
>  T-RETRIEVE: 4000
>  T-RESPONSE: 4000
> Overlap Recv: No
>
> Regards
> Bilal
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110531/3e3e43b4/attachment.htm>