[asterisk-users] DAHDI span timeing source

[Rafael dos Santos Saraiva]

Hi

The timing source is the clock of the system. When a equipment is 0, the
other should be 1. The correct is: 0=slave, 1=master. The default for
private systems is "slave".

Att,
Rafael Saraiva

2011/5/27 satish patel <satish_lx at hotmail.com>

>  Hi There,
>
> We have very old asterisk 1.2 running in production and it has following
> setting in /etc/zaptel.conf.  I have read on web about span and they told
> span= <span num> ,<timing source>,<line build out
> (LBO)>,<framing>,<coding>[,yellow]
>
> Just wondering why it has timing source 0 ?  0=master, 1=slave  right ? Do
> you think i should change it to 1 ?
>
> #Sangoma A102 port 1 [slot:2 bus:7 span:1] <wanpipe1>
> span=1,0,0,esf,b8zs
> bchan=1-23
> dchan=24
>
> #Sangoma A102 port 2 [slot:2 bus:7 span:2] <wanpipe2>
> span=2,0,0,esf,b8zs
> bchan=25-47
> dchan=48
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Att,
Rafael Saraiva
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110527/afa63603/attachment.htm>