[asterisk-users] SIP 603 Declined after AGI execution

[Alejandro Mejia Evertsz]

Hello everyone.

I'm using Asterisk 1.4.31 and A2Billing 1.7.0 to manage a small 
wholesale operation, so I configured A2Billing for not to answer the 
call nor play any greetings or balance notifications to the caller.
I'm authenticating each customer by it's IP address, and each customer 
has it's own context, in which I set the following:

;=====in extensions.conf======
[from-customerX]
exten => _X.,1,Set(CDR(accountcode)=9999)  ;Here I change the 
accountcode depending on each customer
exten => _X.,2,Set(CALLERID(dnid)=${EXTEN})
exten => _X.,3,Goto(a2billing|${EXTEN}|1)

[from-customerY]
exten => _X.,1,Set(CDR(accountcode)=8888)
exten => _X.,2,Set(CALLERID(dnid)=${EXTEN})
exten => _X.,3,Goto(a2billing|${EXTEN}|1)

[a2billing]
exten => _X.,1,DeadAGI(a2billing.php|1)
exten => _X.,2,Hangup(34)
;=============================

A2Billing authenticates and routes the call properly, but when the 
termination gateway for the destination dialed by the customer rejects 
the call, my Asterisk box sends "603 Declined" to the customer.
It also happens when A2Billing doesn't find any route for that 
destination, in which it should return "404 Not Found", but returns "603 
Declined" instead.
I tried to force every rejected attempt with "503 Service Unavailable" 
putting the Hangup(34) you see on my config, but it never seems to get 
there.
The last thing I see on CLI running in verbose is: -- AGI Script 
a2billing.php completed, returning 0

Is there anything I could do to return a different cause than "603 
Declined"?
I posted the same question on A2Billing's forum, but had no luck.

Thanks in advance,

Alejandro Mejia