[asterisk-users] 1.8 and prematuremedia problem
d tbsky
tbskyd at gmail.com
Sun May 15 07:35:02 CDT 2011
hi:
maybe you can try noload res_timing_timerfd in modules.conf and see
what asterisk pick up for timing.
in my system, if I disable res_timing_timerfd, then dahdi timing is
selected and system become stable.
Regards,
tbskyd
2011/5/14 satish patel <satish_lx at hotmail.com>:
> You mean say i don't use res_timing_dahdi.so ? I guess this is just timing
> module nothing related to Card.
>
> _S
>
> ________________________________
> From: turby at canistec.com
> Date: Fri, 13 May 2011 18:30:52 +0200
> To: asterisk-users at lists.digium.com
> Subject: Re: [asterisk-users] 1.8 and prematuremedia problem
>
> sangoma cards do not use dahdi...
>
> 13.5.2011 v 17:16, satish patel <satish_lx at hotmail.com>:
>
> Thank you so much!! I found following (res_timing_timerfd.so in USE). But we
> have asterisk dahdi install and sangoma A102D pri card configured. Do you
> think i should use res_timing_dahdi.so ?
>
> campbx1*CLI> module show like timing
> Module Description Use
> Count
> res_timing_pthread.so pthread Timing Interface
> 0
> res_timing_timerfd.so Timerfd Timing Interface
> 1
> res_timing_dahdi.so DAHDI Timing Interface
> 0
> 3 modules loaded
>
>
> ________________________________
> From: nic at njcolledge.net
> To: asterisk-users at lists.digium.com
> Date: Fri, 13 May 2011 15:11:19 +0000
> Subject: Re: [asterisk-users] 1.8 and prematuremedia problem
>
> At the asterisk CLI type “module show like timing”
>
>
>
> Whichever has a use-count >1 is the one you are using.
>
>
>
> Nic.
>
>
>
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of satish patel
> Sent: 13 May 2011 16:03
> To: tbskyd at gmail.com; asterisk-users
> Subject: Re: [asterisk-users] 1.8 and prematuremedia problem
>
>
>
> Thanks for reply,
>
> How do i find asterisk using which timing res_timing_timerfd or
> res_timing_dahdi ?
>
> -S
>
>> Date: Fri, 13 May 2011 22:13:47 +0800
>> Subject: Re: [asterisk-users] 1.8 and prematuremedia problem
>> From: tbskyd at gmail.com
>> To: satish_lx at hotmail.com; asterisk-users at lists.digium.com
>>
>> hi:
>> I am using 64bit scientific linux 6 with default kernel. my
>> loading is quite low, maybe 1~10 concurrent calls. I remember last
>> time I have unstable problem about timer.
>> my linux now use HPET clock. and asterisk use res_timing_dahdi instead
>> of the default res_timing_timerfd. I don't know if these are related
>> to you problem. hope you can find the key point to make a stable
>> asterisk.
>>
>> Regards,
>> tbskyd
>>
>> 2011/5/13 Satish Patel <satish_lx at hotmail.com>:
>> > Glad you solved it. Now I'm having high CPU load issue. I don't know why
>> > but
>> > sometime my asterisk process reached ~150% CPU load and just locked no
>> > calls
>> > nothing only solution is kill -9
>> >
>> > I've 1000hz preemtive kerenel on ubuntu do you think it's the issue
>> > because
>> > of low through put ?? Which OS are you using?
>> >
>> > --
>> > Sent from my iPhone
>> >
>> > On May 12, 2011, at 9:31 PM, d tbsky <tbskyd at gmail.com> wrote:
>> >
>> >> hi:
>> >> sorry. the issue number is 19268. not 19628.
>> >> sorry about that!!
>> >>
>> >> Regards,
>> >> tbskyd
>> >>
>> >> 2011/5/13 d tbsky <tbskyd at gmail.com>:
>> >>>
>> >>> hi:
>> >>> I report my issue as issue 19628.
>> >>> it is fixed and I run asterisk 1.8 in production now.
>> >>> thanks a lot for your help!
>> >>>
>> >>> Regards,
>> >>> tbskyd
>> >>>
>> >>> 2011/5/11 d tbsky <tbskyd at gmail.com>:
>> >>>>
>> >>>> hi:
>> >>>> ok I will create a bug report. and I found I still need
>> >>>> "prematuremedia=no" in asterisk 1.6.2.18.
>> >>>> yesterday I was testing at home with zoiper softphone + iax. today I
>> >>>> test snom hardware sip phone and found that "prematuremedia=no" is
>> >>>> still necessary.
>> >>>>
>> >>>> Regards,
>> >>>> tbskyd
>> >>>>
>> >>>>
>> >>>> 2011/5/11 satish patel <satish_lx at hotmail.com>:
>> >>>>>
>> >>>>> I am sorry about that but its interesting it doesn't work with 1.8
>> >>>>> SVN
>> >>>>>
>> >>>>> I would say please report this bug so that way you can track issue,
>> >>>>> And
>> >>>>> may
>> >>>>> be in future it help us :)
>> >>>>>
>> >>>>> -S
>> >>>>>
>> >>>>>> Date: Wed, 11 May 2011 01:31:34 +0800
>> >>>>>> Subject: Re: [asterisk-users] 1.8 and prematuremedia problem
>> >>>>>> From: tbskyd at gmail.com
>> >>>>>> To: asterisk-users at lists.digium.com; satish_lx at hotmail.com
>> >>>>>>
>> >>>>>> hi:
>> >>>>>> that issue is marked as fixed, so no more comment can be added :(
>> >>>>>> anyway, I try the following combination:
>> >>>>>> 1.8.3.2 + sig_pri patch
>> >>>>>> 1.8 svn which already has sig_pri patched
>> >>>>>> 1.8.4 + libpri patch (another unofficial patch in issue 18868)
>> >>>>>>
>> >>>>>> but none works.
>> >>>>>>
>> >>>>>> finally I downgrade to 1.6.2.18 and I found everything works. I
>> >>>>>> don't
>> >>>>>> even need to set "prematuremedia" with 1.6.2.18.
>> >>>>>> so I think I will need to stay with 1.6.2 a little longer...
>> >>>>>>
>> >>>>>> thanks a lot for your help!!
>> >>>>>>
>> >>>>>> Regards,
>> >>>>>> tbskyd
>> >>>>>>
>> >>>>>> 2011/5/10 satish patel <satish_lx at hotmail.com>:
>> >>>>>>>
>> >>>>>>> Also i would say add comment on following issue if after patch you
>> >>>>>>> having
>> >>>>>>> issue, That way it help community to fine tune patch.
>> >>>>>>>
>> >>>>>>> https://issues.asterisk.org/view.php?id=18868
>> >>>>>>>
>> >>>>>>> Good luck
>> >>>>>>>
>> >>>>>>>
>> >>>>>>>> From: satish_lx at hotmail.com
>> >>>>>>>> To: tbskyd at gmail.com
>> >>>>>>>> Subject: Re: [asterisk-users] 1.8 and prematuremedia problem
>> >>>>>>>> Date: Tue, 10 May 2011 07:43:47 -0400
>> >>>>>>>> CC: asterisk-users at lists.digium.com
>> >>>>>>>>
>> >>>>>>>> I have applied this patch in 1.8 svn branch and it works great
>> >>>>>>>> for
>> >>>>>>>> me.
>> >>>>>>>>
>> >>>>>>>> I have nothing special configuration just simple dial command for
>> >>>>>>>> outgoing call.
>> >>>>>>>>
>> >>>>>>>> Also check there are progress=yes option in chan_dahdi
>> >>>>>>>>
>> >>>>>>>> --
>> >>>>>>>> Sent from my iPhone
>> >>>>>>>>
>> >>>>>>>> On May 10, 2011, at 5:58 AM, d tbsky <tbskyd at gmail.com> wrote:
>> >>>>>>>>
>> >>>>>>>>> hi:
>> >>>>>>>>> I apply sig_pri.c patch for 1.8.3.2 manually. (the patch can not
>> >>>>>>>>> apply to 1.8.3.2 or 1.8.4-rc3).
>> >>>>>>>>> but the situation is the same. do I need to play with other
>> >>>>>>>>> options
>> >>>>>>>>> with the patch? or I need
>> >>>>>>>>> newer asterisk versions to solve the problem?
>> >>>>>>>>> thanks a lot for information!!
>> >>>>>>>>>
>> >>>>>>>>> 2011/5/10 d tbsky <tbskyd at gmail.com>:
>> >>>>>>>>>>
>> >>>>>>>>>> hi:
>> >>>>>>>>>> thanks a lot for your quick reply. I saw that patch and think
>> >>>>>>>>>> that
>> >>>>>>>>>> it was already included in 1.8.3.
>> >>>>>>>>>> now I know it will be included in 1.8.5.
>> >>>>>>>>>> I will try it and thanks again for your kindly help!!
>> >>>>>>>>>>
>> >>>>>>>>>> 2011/5/10 Satish Patel <satish_lx at hotmail.com>:
>> >>>>>>>>>>>
>> >>>>>>>>>>> Apply this patch https://issues.asterisk.org/view.php?id=18868
>> >>>>>>>>>>>
>> >>>>>>>>>>> --
>> >>>>>>>>>>> Sent from my iPhone
>> >>>>>>>>>>>
>> >>>>>>>>>>> On May 9, 2011, at 9:57 PM, d tbsky <tbskyd at gmail.com> wrote:
>> >>>>>>>>>>>
>> >>>>>>>>>>>> hi:
>> >>>>>>>>>>>> our current connection is below:
>> >>>>>>>>>>>>
>> >>>>>>>>>>>> sip phone<--->asterisk<---->alcatel PBX<---->PSTN
>> >>>>>>>>>>>>
>> >>>>>>>>>>>> asterisk and alcatel PBX is connected via E1 isdn-pri.
>> >>>>>>>>>>>>
>> >>>>>>>>>>>> when I use sip phone to dial outside PSTN world:
>> >>>>>>>>>>>> 1. with 1.4 it is fine.
>> >>>>>>>>>>>> 2. with 1.6.2, I need to set prematuremedia=no is sip.conf.
>> >>>>>>>>>>>> or
>> >>>>>>>>>>>> sip
>> >>>>>>>>>>>> phone can not hear the ring and the beginning of the PSTN
>> >>>>>>>>>>>> voice.
>> >>>>>>>>>>>> 3. with 1.8.3.2, I can not hear ring and the beginning of the
>> >>>>>>>>>>>> PSTN
>> >>>>>>>>>>>> voice. I try to play options with "prematuremedia" and
>> >>>>>>>>>>>> "progressinband". but I can not find working settings.
>> >>>>>>>>>>>>
>> >>>>>>>>>>>> I don't know what other options I can try.
>> >>>>>>>>>>>> thank a lot for information!!
>> >>>>>>>>>>>>
>> >>>>>>>>>>>> --
>> >>>>>>>>>>>>
>> >>>>>>>>>>>>
>> >>>>>>>>>>>>
>> >>>>>>>>>>>> _____________________________________________________________________
>> >
>> >
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>>>>>> -- Bandwidth and Colocation Provided by http://www.api-
>> >>>>>>>>>>>> digital.com --
>> >>>>>>>>>>>> New to Asterisk? Join us for a live introductory webinar
>> >>>>>>>>>>>> every
>> >>>>>>>>>>>> Thurs:
>> >>>>>>>>>>>> http://www.asterisk.org/hello
>> >>>>>>>>>>>>
>> >>>>>>>>>>>> asterisk-users mailing list
>> >>>>>>>>>>>> To UNSUBSCRIBE or update options visit:
>> >>>>>>>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> >>>>>>>>>>>>
>> >>>>>>>>>>>
>> >>>>>>>>>>> --
>> >>>>>>>>>>>
>> >>>>>>>>>>>
>> >>>>>>>>>>>
>> >>>>>>>>>>> _____________________________________________________________________
>> >
>> >
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>>>>> -- Bandwidth and Colocation Provided by
>> >>>>>>>>>>> http://www.api-digital.com
>> >>>>>>>>>>> --
>> >>>>>>>>>>> New to Asterisk? Join us for a live introductory webinar every
>> >>>>>>>>>>> Thurs:
>> >>>>>>>>>>> http://www.asterisk.org/hello
>> >>>>>>>>>>>
>> >>>>>>>>>>> asterisk-users mailing list
>> >>>>>>>>>>> To UNSUBSCRIBE or update options visit:
>> >>>>>>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> >>>>>>>>>>>
>> >>>>>>>>>>
>> >>>>>>>>>
>> >>>>>>>
>> >>>>>>> --
>> >>>>>>>
>> >>>>>>> _____________________________________________________________________
>> >
>> >
>> >>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com
>> >>>>>>> --
>> >>>>>>> New to Asterisk? Join us for a live introductory webinar every
>> >>>>>>> Thurs:
>> >>>>>>> http://www.asterisk.org/hello
>> >>>>>>>
>> >>>>>>> asterisk-users mailing list
>> >>>>>>> To UNSUBSCRIBE or update options visit:
>> >>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> >>>>>>>
>> >>>>>
>> >>>>
>> >>>
>> >>
>> >
>
> -- _____________________________________________________________________ --
> Bandwidth and Colocation Provided by http://www.api-digital.com -- New to
> Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or
> update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> -- _____________________________________________________________________ --
> Bandwidth and Colocation Provided by http://www.api-digital.com -- New to
> Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or
> update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list