[asterisk-users] Asterisk 1.6.2.18, Cisco 79XX not registering

[Steve Davies]

On 6 May 2011 16:30, Eric Wieling <EWieling at nyigc.com> wrote:
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
>> Cassius Smith
>> Sent: Friday, May 06, 2011 11:23 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: [asterisk-users] Asterisk 1.6.2.18, Cisco 79XX not
>> registering
>>
>> Hi all,
>> I have a production server running with about 90 Cisco
>> 79[46]1's and SIP release 8.5(2)SR1 from last year. I was
>> running Asterisk 1.6.2.9 and upgraded last night after hours.
>> (Seemed low risk to me!)
>>
>> Much to my surprise, not a single one of the Cisco 79XX
>> phones would register. Since it's a production server, I
>> rolled back to 1.6.2.9 and everything was fine. All my
>> Linksys SPA phones and Polycom speaker phones registered just fine.
>>
>> I am now setting up  test servers with both 1.6.2.18 and
>> 1.8.3.3 to collect some debug.
>>
>> I am just curious - has anyone else had SIP issues with these
>> phones and updating Asterisk broke them?
>>
>> I will post results of my findings after I have time to collect them.
>>
>> Cassius Smitha
>>
>
> I seem to recall this issue mentioned on asterisk-dev.  Check issues.digium.com and see if there is anything similar to your issue.
>

I also remember this being mentioned - I believe it was fixed in the
chan_sip Via: header handling code. The fix is in branches/1.6.2
already, so you should be able to grab the patch without too much
trouble.

Regards,
Steve