[asterisk-users] How to debug MixMonitor misbehaviour
Bruce B
bruceb444 at gmail.com
Wed May 4 08:18:45 CDT 2011
Thanks for the input. I think that works as my other recordings work. I will
test that again regardless.
Is there no real other way to know why MixMonitor fails or look more into
it?
Regards,
Bruce
On Wed, May 4, 2011 at 5:03 AM, salaheddine elharit <
salah.elharit200 at gmail.com> wrote:
> hi
>
> you can add this in extenssion.conf
>
>
> exten => 223,1,Answer()
>
> exten => 223,2,MixMonitor(test_${UNIQUEID}.wav|av(0)V(0))
>
> exten => 223,3,Dial(SIP/223)
>
> exten => 223,4,Hangup()
>
> i can record without any issue in /var/spool/asterisk/monitor
>
>
> 2011/5/4 Bruce B <bruceb444 at gmail.com>
>
>> Thanks for the input.
>>
>> Yes, I did call out many times, but the recording doesn't happen even
>> after the call is bridged and there is two way audio. I also took out the
>> "b" option and so it should recording the ringing right (even before call is
>> bridged) but it doesn't do that or any recording at all.
>>
>> Any other suggestions as to what I can do to see why this is not
>> recording?
>>
>> Regards,
>>
>>
>> On Tue, May 3, 2011 at 2:13 AM, virendra bhati <virbhati at gmail.com>wrote:
>>
>>> Hi,
>>>
>>> As per your Dialplan MixMonitor will work after call bridge, In you case
>>> still call is not bridge. That's why MixMonitor is waiting of call bridge...
>>>
>>> *
>>> MixMonitor(Q-${QDIALER_QUEUE}-${UNIQUEID}.WAV,b,)
>>> option b=>** A bridge flag allows recording to only take place when the
>>> channel is bridged.*
>>>
>>> So just for test make sip call and start mixmonitor to test the recorded
>>> file.
>>> default path od recording id
>>> *
>>> /var/spool/asterisk/monitor/
>>>
>>> *
>>> On Tue, May 3, 2011 at 10:40 AM, Bruce B <bruceb444 at gmail.com> wrote:
>>>
>>>> Hi everyone,
>>>>
>>>> For some reason MixMonitor doesn't record when it should; It actually
>>>> shows the MixMonitor line just fine on the CLI. How can MixMonitor be
>>>> debugged for things like privilege issues or filename issues?
>>>>
>>>> **I had this working at one point and then stopped working. Not sure
>>>> what I changed.
>>>>
>>>> System Info:
>>>> Asterisk 1.4.21.2
>>>> Queuemetrics 1.6.3.0
>>>>
>>>>
>>>> [queuedial]
>>>> ; this piece of dialplan is just a calling hook into the
>>>> [qm-queuedial] context that actually does the
>>>> ; outbound dialing - replace as needed - just fill in the same
>>>> variables.
>>>> exten => _XXX.,1,Set(QDIALER_QUEUE=q-${EXTEN:0:3})
>>>> exten => _XXX.,n,Set(QDIALER_NUMBER=${EXTEN:3})
>>>> exten => _XXX.,n,Set(QDIALER_AGENT=Agent/${CALLERID(num)})
>>>> exten => _XXX.,n,Set(QDIALER_CHANNEL=ZAP/g0/${QDIALER_NUMBER})
>>>> exten => _XXX.,n,Set(QueueName=${QDIALER_QUEUE})
>>>> *exten => _XXX.,n,MixMonitor(Q-${QDIALER_QUEUE}-${UNIQUEID}.WAV,b,)*
>>>> exten => _XXX.,n,Goto(qm-queuedial,s,1)
>>>>
>>>> CLI output:
>>>> -- Called 4904166356574 at queuedial/n
>>>> -- Executing [4904166356574 at queuedial:1]
>>>> Set("Local/4904166356574 at queuedial-d851,2", "QDIALER_QUEUE=q-490") in
>>>> new stack
>>>> -- Executing [4904166356574 at queuedial:2]
>>>> Set("Local/4904166356574 at queuedial-d851,2",
>>>> "QDIALER_NUMBER=4166356574") in new stack
>>>> -- Executing [4904166356574 at queuedial:3]
>>>> Set("Local/4904166356574 at queuedial-d851,2",
>>>> "QDIALER_AGENT=Agent/19053640558") in new stack
>>>> -- Executing [4904166356574 at queuedial:4]
>>>> Set("Local/4904166356574 at queuedial-d851,2",
>>>> "QDIALER_CHANNEL=ZAP/g0/4166356574") in new stack
>>>> -- Executing [4904166356574 at queuedial:5]
>>>> Set("Local/4904166356574 at queuedial-d851,2", "QueueName=q-490") in new
>>>> stack
>>>> * -- Executing [4904166356574 at queuedial:6]
>>>> MixMonitor("Local/4904166356574 at queuedial-d851,2",
>>>> "Q-q-490-1304399098.18.WAV|b|") in new stack*
>>>> -- Executing [4904166356574 at queuedial:7]
>>>> Goto("Local/4904166356574 at queuedial-d851,2", "qm-queuedial|s|1") in new
>>>> stack
>>>> -- Goto (qm-queuedial,s,1)
>>>>
>>>> Trying to locate file:
>>>> root at pbx:~ $ updatedb
>>>> root at pbx:~ $ locate Q-q-490-1304399098.18.WAV
>>>> root at pbx:~ $ ls /var/spool/asterisk/monitor/Q-q*
>>>> ls: /var/spool/asterisk/monitor/Q-q*: No such file or directory
>>>>
>>>> I also turned on the Debug but I couldn't see anything out of the norm.
>>>> As you can see above the CLI output is just fine.
>>>>
>>>> Thanks,
>>>> Bruce
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>> http://www.asterisk.org/hello
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>
>>>
>>>
>>> --
>>>
>>>
>>>
>>> -----
>>> Thanks and regards
>>>
>>> Virendra Bhati
>>> +91-9172341457
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>> http://www.asterisk.org/hello
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110504/b175f097/attachment.htm>
More information about the asterisk-users
mailing list